The purpose of this thesis is to collect knowledge of techniques and materials for planning roofgardens. Gardens built on top of buildings is not a new phenomenon, already in the beginning of the century architects were experimenting with roofgardens. During the Modern Era roofgardens appeared as a part of the design and worked well together with flat roofs and the ideas of light, air and greenery. Today the most common kind of roofgarden is on a ground-level joist that hides parking or other underground functions. The most important difference between planning a roofgarden and a garden on the ground is the limitation of the load of the roofgarden. Plants, paving-material and equipment must be chosen with this in mind. A light and thin layer of soil demands plants with small needs for water and nutrition.

AbstractOur purpose for making this study is to study the implementation, the use of and the effects of Lean within our case objects.  We chose to make this thesis by case studies. The three themes mentioned above is also the main research questions that we aim to find an answer to by this study. We have chosen to do a cross section analysis where we conducted structured interviews to find answers to these questions. The theoretical reference frame consists partly of traditional theoreticians within Lean but also more recent research within the subject as well as theory specifically for Lean within the Health Care sector.The result of this study shows in all our case studies that the Management has been supporting the implementation, but that the implementation process proceeds faster if also the professionals are involved in the process.  To succeed with the implementation there is a great need for good reasons and strives that can benefit the professionals. By the use of Lean our case studies have evaluated its processes, with the main intentions being to reduce waste activities and to create flows with ?pull systems?.

Changes in the climate and the environment are largely consequences of human influences. Resources are given to teach adults about the environment. However, there are problems in focusing on adults because it is difficult to influence people when they already have created a lifestyle. We have instead chosen to focus on teaching children about changes in the climate and the consequences of this.Many of the toys available on the market today encourage children to consume. Luxury cars and dolls with hundreds of accessories are often made of materials that has have a negative effect on the environment.Another problem we often encountered during the year is the declining interest in technology and science.

This our bachelor thesis of 15 p ECTS. Our subject is What makes a good park? ? And how to make it better. The purpose of our bachelor thesis is to provide an overall direction for instrinsic qualities, resource (areas and materials) maintenance, visitor use, visitor experience and a basic foundation for decision-making for the maintenance and enhancement of the parks in Danderyd municipality.

Envirotainer builds containers that are specialized in transporting of temperaturesensitive products these containers are customized for airplanes. The containers arethen leased to other companies, most often to pharmaceutical companies.Envirotainer are based in Lagga, Knivsta. It is also here where the production of thecontainers is held. The container RAP T2 was designed in the early 80ies. The RAPT2 contains a fleet of about 1220 containers spread all over the world.

AbstractOur purpose for making this study is to study the implementation, the use of and the effects of Lean within our case objects.  We chose to make this thesis by case studies. The three themes mentioned above is also the main research questions that we aim to find an answer to by this study. We have chosen to do a cross section analysis where we conducted structured interviews to find answers to these questions. The theoretical reference frame consists partly of traditional theoreticians within Lean but also more recent research within the subject as well as theory specifically for Lean within the Health Care sector.The result of this study shows in all our case studies that the Management has been supporting the implementation, but that the implementation process proceeds faster if also the professionals are involved in the process.  To succeed with the implementation there is a great need for good reasons and strives that can benefit the professionals. By the use of Lean our case studies have evaluated its processes, with the main intentions being to reduce waste activities and to create flows with ?pull systems?.

This thesis investigates the socio- and environmental economic effects of a deep repository for spent nuclear fuel in Forsmark in the municipality of Östhammar. I seek to show the general picture but focus on the effects on employment, environment and income. Cost-benefit analysis is used to investigate the differences in utility between a scenario with and a scenario without a deep repository in Forsmark. Most of the possible effects can not be valued and many can not even be quantified with the data available today. Therefore this thesis has a bit of a ?preliminary study character? and seeks to show what we know today and what needs to be further investigated when available data allow it. The costs that could be valued are noise from the traffic during the period of building and emissions of carbon dioxide and nitrogen oxides from the transportation of rock masses during the building period.

 The objective of this thesis is to examine the difference in workability in fresh concrete, when crushed fine aggregate replaces natural gravel. The shape of the fine aggregate,  packing and flow of six crushed material and three natural materials will be determined by easy studies, the results will be compared with a slump cone test..

This project started with an exploration of geometric shapes and textile materials. It resulted in a chair made out of textile bands with different elasticity. The surface for sitting is flat when the chair is not used, and changes in the moment you sit down and gets a new shape. A piece of furniture that adapts to each individual. The chair emphasizes the important relationship between human and product as the person using it becomes a part of the chair for a moment..

Ensåsengruvan is a mine situated within Ljusdals municipality in central Sweden. Themine was in use from 1984 to 1991 and has since been undergoing a remediation program. Mine tailings from sulfide rich ore is a potential environmental hazard due to its tendency to cause acid waters and heavy metal leakage. Lake Ensjön is situated one kilometer from the mine area. Due to the hydrological conditions it was not expected to receive inflowing water from the mining area.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

In this thesis an energy analysis of ethanol production at the ethanol plant of Lantmännen Agroetanol in Norrköping has been performed. The ethanol plant has been studied in combination with Händelöverket, the combined heat and power plant which provides the ethanol process with steam. The purpose of this study was to determine the energy consumption for the whole production chain from grain to ethanol. The analysis has included the energy consumption for cultivation of grain, production of chemicals, the production chain for wood chips, the steam production and the ethanol plant. The grain and wood chips are both considered raw materials there for the energy content in these are not included as energy input in the system.

With the growing amount of citizens with another mother tongue than Swedish, the need for assessment instruments in other languages than Swedish within the Swedish health care increases. To enable this, the knowledge of multilingualism and adequate assessments are required. The aim is to develop a modern Arabic version of a screening material that is comparable to what is used in the Swedish clinic in the assessment of people diagnosed with aphasia. In the present study, Short Aphasia Examination (Kortfattad Afasiprövning), which is one of the few screening material is available in Swedish and among the ten most frequently used assessment materials (Blom Johansson, Carlsson & Sonnander, 2011). Translation and adaptation was made to the Standard Arabic (KAPARABISKA) and Arabic dialect of Hadari (KAPHADARI).

Few helmets, dated to the Vendel period are known from Scandinavia and even fewer are known from the Viking age. Paradoxically, picture stones and sagas frequently tell about these objects as if they were very common, something that is contradicted by the archaeological material. The purpose of this thesis is to examine different literary sources and compare these to the archaeological materials and by doing so, gets a clearer picture about the emergence, use, function and of the late Iron Age helmets in Scandinavia..

Ett av de vanligaste fodermedlen hos jordbrukare i Kampala är drav, en biprodukt vid ölframställning. Hög efterfrågan, dyr transport samt dålig lagringskapacitet leder till att tillgången på drav begränsas. Ett sätt att lagra drav och således förbättra tillgängligheten är genom ensilering. Denna studie genomfördes som en Minor Field Study, och var en del i ett projekt mellan SLU och Makerere University, ?feed for livestock in urban/peri-urban areas of Kampala?.