The environmental work in Sweden has developed a lot over the past fifty years. Today, most companies have some kind of environmental work. Environmental activities are regulated by the Environmental Code, which applies in parallel with other laws. This report is an environmental review for Bräcke Diakoni. The report aims to find out how much environmental impact Bräcke Diakoni has.

Background: The demand for sending letters, in the traditional aspect, has decreased because of electronic sources which have replaced a big part of letter communication. The Postal Service constantly strives for lowering costs and due to the changeable demand, a greater awareness is required regarding recourses and their usage. The previously mentioned measures in combination with commonly occurring quality issues during the collective process at the letter terminal in Alvesta would be improved by applying a lean-perspective to the process. A first step towards saving of time is to apply the ?value stream mapping?-method on the collective process for small and large letters.Purpose: To map the process of collection for small and large letters to be able to identify waste of recourses and furthermore give suggestions on how the Postal Service would be able to reduce the waste of recourses identified.

The concept of sustainable development has been pervasive in recent years and many organizations choose to implement sustainability and adapt their activities accordingly. The purpose of this study have been to explore how a collaboration on the use of waste materials may look to analyze what influences cooperation. A case study has been carried out examining a Swedish state regional project aimed at creating partnerships between actors and utilizing textile waste with the help of design. The study was conducted using qualitative methods and the collection of data has been done through interviews and by examining documents. The results show that there are seven key factors that affect cooperation: expectations, commitment, internal communication, a strong non-profit actor, individual treatment, personal networks and the diversity of actors.

The aim of this essay is to examine the handling of plastic waste on a local level in the three municipalities of Gothenburg, Malm? and Stockholm. This is achieved with the help of guidance within the theory of Multi-level Governance. By applying the EU directive 2019/904, about disposable plastic, and examining the global plastic problem, the efforts to promote sustainable use, and recycling of plastic, is analyzed. The method involves a qualitative content analysis, where the 2022 waste plans of the three municipalities, ?Sveriges handlingsplan f?r plast? by the Government Office, and the 2019/904 EU directive constitutes the base of the study.

Every year 67000 tons of food is wasted by Swedish retail stores. The waste implies financial losses for the retailer and it has a huge impact on the global environment. Reducing in-store food waste is thus a win-win situation for both retailers and society. The most effective way to reduce waste is primarily by optimizing the logistics of supply, but customers expect a store with a wide range of products and stuffed shelves. Thus there will always be products about to expire.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

As a small and land scarce country, effective Waste Management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Environmental issues is now taking a growing place in society and to ensure that companies meet public expectations and do their part in working towards a sustainable development, environmental management system is said to be an effective tool (Almgren & Brorson, 2009).This case study has examined a company's environmental management system in order to find strengths and weaknesses within the ISO 14001 system. The work was carried out using interviews, document reviews and analyzes in which the three main concepts control the report ; "daily work", "audit" and "environmental aspects".The results shows that the daily work looks different depending on where you are; in the production or at the office. The audit examined all documents related to the environmental management system and the study showed that the biggest strengths was the commitment and waste handling while areas such as environmental goals and management review needed improvement. As a result of the deficiencies identified, suggestions for improvements was proposed. The investigation of the routine of the environmental aspects showed an incomplete routine where the red wire from identification to evaluation was missing.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.