Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

This thesis in social anthropology is based on a field study on the Internet exploring Tibetan identity. With a post-modern approach the thesis explores the possibility fora non-tibetan to create a Tibetan Internet identity and become a part of the Tibetan community that exist on the Internet..

Communication between parties in an important process in their relationship can be based on a contract. This communication can for exemple be composed by a handwritten contract or an electronic contract. Contract law makes no difference between these two forms. to create more favourable requirements for commencing a contract or an ongoing contract there are possibilities to use standard agreements. Therefore a contract can be based on the will of the parties or on a standard agreement.An electronic signature shall secure that electronic transferred information has not been altered and also to identify the sender of the information.

This thesis seeks to investigate how an agreed written form requirement is met in an electronic environment. Swedish Contract law is applied since Sweden lack specific regulation for electronically closed agreements. Since contractual freedom prevails in Swedish law, it is up to the parties themselves to decide if the formal requirements to be applied.In order to assess whether the written requirement is fulfilled in the electronic environment, a purpose-oriented analysis should be made. When the purpose of why a written form requirement applies has been clarified, the analysis continues to assess whether the objective can be achieved with the modern form of communication. The method is called functional equivalence and means that when an electronic media fulfill the same functions as the paper medium so will the electronic medium as a starting point to give the same legal effect as if it were the case of a written paper document.

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

In today?s society, safety in a workplace is an important factor to any organization. Focus on improving the working conditions by making them safer through technology is taking us into a time where we rely on technology to keep us safe. How well developed the technology may be, it is still not enough to keep us entirely from harm. Human error will always be a factor in the human interaction with a workplace.

The environmental issues have during the last decenniums gained an increased role in both the political arena and in the market economy. The society is therefore more knowledgeable about the environment and our impact on it. Through this enlightened state, stakeholders tend to put pressure on the organizations of today. They, more or less willingly, incorporate this responsibility to be a part of their business. Entrepreneurs in the environmental area have seen this rising market as an opportunity to gain market shares and other positive outcomes.

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

At nuclear power plants, electrical valve actuators are important for ensuring that the reactor core is water covered and the pressure in the reactor tank and containment is limited. The electrical actuators are provided with overload protection in case of drawing higher current then the motors are rated for. When safety manoeuvres are needed, the overload protection must not trig and cause the valve to stop before completing the manoeuvre. Analyses have showed that the current settings of the overload protection may cause an illegitimate trig at the worst theoretically possible accident. A new method has been developed with conservative assumptions and applies overload protections for all electrical valve actuators at the three reactors in Forsmark..

Physical rehabilitation is a constantly growing field in veterinary nursing. To build a physical rehabilitation center for dogs you need personnel with adequate education and knowledge. In spite of good knowledge it can be hard to know which areas and equipment necessary for the work. It is of interest to describe how a physical rehabilitation center can be planned and which spaces and equipment to prioritize. In this study, data of different spaces and equipment for a physical rehabilitation center for dogs are presented and also the economical perspective is introduced as a background.

Waste management is a major challenge for several countries around the world. Sweden and the Philippines have similar waste management legalization but different potentials to effectively achieve the goal of sustainable waste management. Education is the key to sustainable development and both countries promote the subject environment in the curriculum. Based on scientific articles, reports and personal meetings, a survey was conducted among 510 students from Gothenburg, Sweden and Iloilo City, Philippines. The survey aimed to investigate the knowledge, attitude and behavior regarding waste management and was analyzed to answer questions of possible reasons to differences and also, linkages to sustainable development.

In October 2010 it was discovered that leach water had been released from a waste deposit directly into a ditch during a period from March until October 2010. The river Dalhemsån runs close to the waste deposit, just about 10 meters from the ditch. By studying the benthic fauna it was discovered that the environmental status of Dalhemsån is bad in this part of the river, but the discharges of leachate from the waste deposit does not seem to have deteriorated the water further since May 2010..