The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

This thesis work has been carried out at the consultant company Pöyry Sweden AB in Norrköping, whom performs the task for E.ON heating Sweden AB, Händelöverket in Norrköping. The report shows methods to manufacture slurry consisting of fly ash and water. The slurry shall be pumped into several former oil storage rock shelters that E.ON has put into operation for the specific purpose. The ash mixture also develops hydrogen gas in contact with water.The work has aimed to produce different suggestions of methods and equipment that can be used for the objective. Mixing method and security issues were in centre while working with the suggestions.

Miljö- och samhällsbyggnadsdepartementets Johan Gråberg ansåg att Sverige låg långt fram med sina insamlingskvantiteter av elavfall och att det vore bra om Sverige blev en förebild för övriga Europa. Men den svenska modellen med producentansvar reglerar idag endast producenternas ansvar att samla in och förbehandla elavfall, den säger mycket lite om hur transporterna ska ske med hänsyn till infrastruktur och miljö. Den svenska modellen går därför inte att använda i Europa då insamlingen och transporterna skulle öka transportbehovet och nyttjandet av tunga lastbilar med släp (Kallunki & Eknor 2005, s. 39-41). Detta går emot de miljömål och de miljöbestämmelser som finns i Europa (Nationalkommittén för Agenda21 och Habitat 2002, s.

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .

The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

An excessive input of nutrients to lakes and other water bodies has created a problem with eutrophication in Sweden. Untreated, or partially treated, domestic sewage is a major source for discharge of phosphorus (P), which is the nutrient most frequently responsible for eutrophication of most fresh waters and the Baltic Sea. The waste water can be cleaned by filter materials, which have a high P-retention ability and which after saturation may be used as fertilizers. Four potentially suitable filter materials were tested in batch- and column experiments in this study. In the batch experiments, the following materials were shaken with waste water in time series ranging from 5 seconds to 60 minutes: coarse (1-4 mm) and fine (0-2 mm) Polonite® (heated bedrock from Poland); Filtralite® (light expanded clay aggregates with limestone added before burning); water cooled blast furnace slag (BF-slag) and BF-slag mixed with 10% burned limestone.

For an outdoor environment to function optimally as a playarea requires that it is flexible, that is, contains places and elements that give room for the imagination and for own interpetretations, and also that the children in some way can influence and change their surroundings. It is also important to have variety, both in the sense that the playground has a unique character that distinguishes it from other places, and that it allows many different games and activities. There should for example be room for both wild games of running and moving around where many children can participate, and calm corners to withdraw to for rest or quiet play. A good playground should surprise, challenge and encourage children to discover their surroundings. One way to achive this is to use plants and materials from nature, whose irregular forms and structures can become interesting elements to explore. Vegetation also gives sence-experiences of various kinds, materials like twigs and leafs to play with and a place to play house.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

AbstractStudents at Mälardalen University have long performed their lab on a small turbojet engine in the course Aircraft Engine Technology. Since 2011, the engine has been dysfunctional. This was due to lack of maintenance. Since the lab has been an important element in teaching, the University had decided to get the engine functional again. This thesis project has been a request of Mälardalen University.The task we were assigned to was:1.

Detta arbete har sin utgångspunkt i ökad återvinning och minskning av sopberg. Ett exempel som vi har använt oss av i vår forskning är ett samarbete mellan Röda Korset och Kriminalvården. Varje år slängs 25 % av de textilier som välgörenhetsorganisationer får in och dessa sopberg skulle man kunna minska genom ökad återvinning. Kriminalvården har registrerat ett varumärke som heter Made in Jail, vilka tillverkar köksrelaterade produkter. Syftet med det här arbetet blev därför att utveckla idéer till hantverksprodukter som slukar mycket spill.Valet av metod blev kvalitativa intervjuer, som utfördes med tre personer med olika kopplingar till arbetet.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

The demand for district heating is expected to decrease in the future, due to competition from heat pumps and energy efficiency measures in buildings. Development of existing district heating systems is therefore necessary for district heating companies to maintain market shares. This Master?s thesis describes and investigates the heat and electricity production and profitability of a combined Organic Rankine Cycle (ORC) and heat pump that is integrated with an existing district heating system. The studied district heating system is utilizing heat from waste incineration. In Sweden waste constitute 20 % of the fuel mix used in district heating systems, and this share is expected to increase in the future.

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s temperature is rising, where the result of it is worldwide disasters.