Detta arbete handlar om vad ett va?letablerat fo?retag skulle kunna go?ra med sitt restmaterial. Vi vet att det idag finns en ma?ngd fo?retag som jobbar fo?r att minska sitt restmaterial och ha?r presenteras fo?rslag pa? vad man kan go?ra med det som a?nda? uppkommer. I arbetet presenterar vi fo?rst hur vi ga?tt till va?ga fo?r att samla in va?r information, alltsa? hur va?r forskning gjorts.

Every year 67000 tons of food is wasted by Swedish retail stores. The waste implies financial losses for the retailer and it has a huge impact on the global environment. Reducing in-store food waste is thus a win-win situation for both retailers and society. The most effective way to reduce waste is primarily by optimizing the logistics of supply, but customers expect a store with a wide range of products and stuffed shelves. Thus there will always be products about to expire.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

ABSTRACTThe discussions about energy use have increased year by year everywhere in the society, and so also in the healthcare sector. But what is actually energy use in a hospital facility, and what affects it?The typical way today to express the energy use is in kWh/m2. The problem with a key performance indicator that is expressed as energy use in relation to a specific area is that it does not take into account the activity in the building. Even though the activity to a very high extent affects the energy use.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

A variety of food is produced and passes the whole chain by processing, transport and trade and finally it ends up with the consumer. But in many cases, the food is disposed before it is eaten. Some of the produced food does not even pass the whole entire chain before it turns to waste. The question about food waste in debates is a case of access to food for every human beeing. It is question of consumption of the resources, waste management and an issue of environmental impact.

The Swedish consumer electronic industry has recently experienced an increasingly intensive price war. The price war has forced some operators in the business to declare bankruptcy, as the only way to compete has been by driving down prices. A challenge that retail chains in the consumer electronics industry is facing is to increase their margins. If store personnel can success with upselling, the companies will increase their profits. The purpose of this paper is to examine if the sales people in the consumer electronic industry can influence the customer to buy a more expensive product and what the effects the upselling has on the customers' attitudes.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This report explains the need to develop a configuration manager that handles transmission equipment which exists in the Swedish Defence telecommunications network. The configuration module will display the configurations and compatibility among the equipment and their software which are all part of the network.Also included in this report are tools, methods and results for the development of a prototype for the configuration manager. The prototype consists fundamentally of a database assisted by a user friendly website.The transmission equipment handles a lot of important transmission of information and is in the hands of a department of SAAB, OFGCA, by orders from the Swedish Defence Materiel Administration (FMV). Within the work included in this order exists a continuous update of both software and hardware which the equipment consists of. Therefore it?s highly important that there is a monitoring of which of the software and hardware is compatible with one another, ensuring that the functions of the system work properly.The consistent updating has resulted in compatibility issues between components and because of this, a need for a configuration manager has arisen..

The objective of this thesis is to examine which form value-adding qualities specific for the Web take and to what extent they exist in a selection of electronic scholarly editions of literary works. The examination was concentrated on the qualities hypertextuality, interactivity and hypermediality. Besides extent and form, the research questions focused on whether or not the form of the editions correspond to theories and guidelines about how electronic scholarly editions should be designed to generate an added value from a scholarly point of view. The empirical approach was qualitative and the selection consisted of 31 editions. They were examined according to theories about the value-adding features of the qualities.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

Rapid development in the realms of electronic publishing has had a profound impact on information services in general and the academic library in particular. Since mid 1990´s an increasingly number of scholarly journals and other information resources have been made available electronically. Electronic books are the newest electronic service in the hybrid library and can be seen as the third wave in the digital library. Although electronic books have for a long time existed as electronic texts such as digitalized classics or other texts in the public domain, it is not until recently that e-books have been distributed and packaged in a commercial form. As more e-book models are being developed, libraries are being forced to take e-books into consideration when planning their information services.The aim of this master thesis is to describe the first stage of implementation of the new electronic media, the electronic book or e-book, in Swedish academic libraries.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.