This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

Data Warehouse är ett relativt nytt fenomen i jämförelse med traditionella databassystem, och i och med de senaste årens kraftiga tekniska utveckling har förutsättningar för att realisera konceptet skapats. Inom branschen finns ett antal problem rörande metadata, som i denna uppsats legat till grund för vår inriktning. Många av dessa problem beskrivs utifrån ett tekniskt perspektiv, vilket detta arbete inte gör. Vi har istället valt att undersöka vilka problem som föreligger vid säkerställning av att metadata hålls uppdaterat i ett Data Warehouse med hjälp av tydlig ansvarsfördelning. Vi har funnit att det föreligger vissa likheter mellan de problem som konceptet Knowledge Management angriper och de problem som en organisation ställs inför när man söker säkerställa att metadata hålls uppdaterat med hjälp av tydlig ansvarsfördelning.

This thesis discusses the differences between an automated and design centered layout process. The work has beenconducted at CBG Konsult AB, a service provider of multilingual solutions, translations and localization.The purpose with this work was to investigate some limitations and issues with the layout process involving the languagefamily XSL used for automated layout at CBG Konsult AB..

Purpose/Aim: The purpose of this study is to examine how the advertisements of houses in the newspaper of Dagens Nyheter, have developed in layout, by text and image, during the last fifty years and to examine what part of the home is highlighted, as evident values of lifestyle.Material/Method: By examining twenty advertisements from the newspapers every decade during the period of 1958-2008, the layout and lifestyle will be described and analyzed by a quantative and qualitive (discourse) method.Main results: The advertisements has changed in many ways. The layout has drastically developed to a more personal layout of the estate agents and the trends of lifestyle have had an impact on how the agents have created the text in the advertisments to entice customers..

Studien har handlat om att ta fram riktlinjer för hur extrahering, transformering och inladdning (ETL) av kreditbedömningsinformation bör göras när det kommer till att införa ett Data Warehouse (DW). Ett kvalitativt angreppssätt har använts med både en fallstudie och en intervjustudie, där fallstudien genomfördes med Asitis AB som är en systemleverantör förfinans- och reskontrafinansiering (factoring) för att undersöka potentiella affärsmöjligheter med ett DW med kreditbedömningsinformation. Intervjustudien användes för att samla in värdefull information från individer inom alla berörda problemområden, och användes sedan i fallstudien. Resultatet var både framgångsfaktorer och fallgropar för ETL-processen med kreditbedömningsinformation som kan fungera som stöd för organisationer med detta behov. Det har visat sig att ETL-processen för kreditbedömningsinformation utgör ett område med stor potential för affärsmöjligheter, där det krävs hög kompetens, domänkunskap, proaktivitet och juridisk kunskap vid genomförande av ETL-processen..

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

Examensarbetet utfördes på företaget Indexator AB som bland annat tillverkar lågvarviga vingmotorer för rotation av gripdon.

The thesis has been carried out at Nedis AB in Jönköping. The aim was to develop proposals on approaches that could help the company to continually improve their warehouse operations by eliminating unnecessary operations, making the warehouse more structured and how they better could use the staff's suggestions for improve-ment. The collection of data consists of observations, interviews with a total of nine people from the staff of Nedis AB and a benchmarking conducted at Husqvarna AB. A number of shortcomings and weaknesses in procedures at the warehouse were iden-tified. Packing stations were not standardized and they were seen as poorly structured and messy.

This report is founded in lack of knowledge concerning the design and layout procedureduring a new engine room construction.The prime question is how the engine room takes its form from idea to construction and whathappens in between. We want to give the reader a better understanding in how the work isdone and why it is designed the way it is concerning layout, ergonomics and safety. Duringthis report we will enhance the knowledge concerning regulations and rules that are of greatsubstance such as SOLAS, Swedish Sjöfartsverket and IMO.By contacting the parties involved in the process in newly designing a vessel and its engineroom, we will assume their approaches and experiences. We will study the work progressfrom planning to construction of a vessels machinery spaces. We will with the help ofinterviews with interested parties get an idea of the approach and also compare the finishedproduct a bit depending on company size and resources.The investigation resulted in a good basis for how a ship engine room design takes shape andwhich aspects are taken into account, however, we found that the existing rules concerningengine room layout was very vague and was seen as the most recommendations.

This study has been assigned by Bengt Hellman who works at the logistic department at IKEA Torsvik just outside of Jönköping. The task has been to develop a new picking strategy for the Oversize area in the CDC-Warehouse. The reason why IKEA wants a new strategy is because they want to minimize the route length for the forklifts when collecting the orders.By evaluating the current strategies on other areas in the CDC-storehouse, study literature within this subject and look at restrictions for the storing of goods, we have analyzed how the Oversize area works today. We compared the gathered information, to how it should be done according to the literature to be able to work out a new functional strategy.Today, IKEA does not have a working strategy for the oversize area because of lack of time and because all the power has been put on other areas were sales rates are currently higher. This have led to lack of organisation at the Oversize area and items are just put were there is space without first analysing were it should be placed.The strategy that we have worked out and introduced to IKEA builds on easiness of understanding the layout, the employees shall know why an item is placed where it is.

Purpose/Aim: The aim of the paper is to study the periodical Blå Bandet and its structure, typography, layout and design and how the periodical can develop by a redesign.Material/Method: I have interviewed the editor of Blå Bandet and studied literature about the market of periodicals and design of periodicals. After that I have done an analysis of Blå Bandet and its structure, typography, layout and design.Main results: I present a proposal for a new structure and a new typography. Finally I present examples of how layout and design can work out in a redesign..

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Business Intelligence may help organizations in making the right decisions byproviding data for analysis which can be presented to decision makers. DataWarehouse which is a central part of Business Intelligence can be built in severalways but the methods presented by Ralph Kimball and Bill Inmons are considered thetwo main methods. The solution provided by Inmon focuses on integrating the entirebusiness into one large database using relational database development. Kimballhowever proposes dimensional database modeling by creating one or more data martsand integrating these using a data bus. Previous research has shown that the quality ofa Data Warehouse can be measured through critical factors such as data quality andsystem quality.

Det finns ett förtroendegap mellan morgontidningar och kvällstidningar. I tidigare studier har förtroendet kopplats till olika faktorer: innehåll, spridning och nyhetsrapporteringens kvalitet. I denna uppsats genomfördes ett experiment för att presentera sambandet mellan förtroende och en tidigare förbisedd faktor ? layout. Experimentet bakades in i en användarstudie på åtta personer där hälften ingick i en testgrupp och den andra hälften i en kontrollgrupp.