This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

The aim of this study is to illuminate social worker?s perception of social class within the Swedish social service system. This study therefor examine if social class contributes to the production and reproduction of the client and what impact social class has on the interaction between client and social workers. The study was conducted with qualitative semi-structured interviews with social workers from three different departments of social service. The theoretical approach is Yeheskel Hasenfeld?s theory about moral practices in welfare organisations, Michael Lipsky and Roine Johansson?s theories about client construction and Pierre Bourdieu?s class theory.

During the summer 2007 was a scrubber tested at Gruvön papper mill in Grums. The scrubber reduced NOx with 90 % in flue gas. NOx was transferred from the flue gas to a scrubber liquid as nitrate and nitrite. The scrubber liquid needs to be purified from nitrate and nitrite. One possible solution is to clean the scrubber liquid in Gruvön biologic cleaning construction.Microorganisms in the biologic cleaning construction need to assimilate nitrogen. There are environments free from oxygen in the cleaning construction.

Volvo Aero är ett av sex företag inom Volvo Group. Alla anställda inom Volvo Group och i och med det alla på Volvo Aero medverkar i det strukturerade verksamhetsutvecklingsarbetet, VU. Arbetet sker i grupper för att uppfylla syftet att ?förbättra och utveckla verksamheten så att vi når våra egna ?ribbor? och de huvudmål vi enats om på medarbetarseminarierna?. Central produktionstekniks strategiska fokus är ?Effektiva standardiserade arbetssätt och metoder? och utgör målsättning för avdelningens VU-arbete.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.

Volvo Bussar i Säffle producerar de flesta kundanpassade bussarna som tillverkas inom Volvokoncernen. Kundanpassningarna medför att många timmar behöver läggas på stolsmontering, och ibland behöver även omkonstruktion utföras, under offertritningsprocessen som idag sker i 2D-CAD. Korta ledtider för offertritningarna leder till att ritningarna inte blir tillräckligt exakta med de nuvarande metoderna och arbetsverktygen.Målet från Volvo är att en parameterstyrd modul för stolsplaceringen skall utvecklas i 3D-CAD. Modulen skall också inkludera konstruktionsparametrar för bussens golv.Den parameterstyrda modulen måste vara snabbarare och pålitligare än de nuvarande metoderna i 2D-CAD. Därför måste layouternas signifikanta mått kunna ändras lättvindigt.

The Vaxholm conflict was initiated when the Swedish Trade Union for Construction Workers shut down a construction site in order to prevent a Latvian construction company to build a school after the two parties had failed to agree upon a collective agreement in compliance with Swedish regulations. An emotional public debate followed that resulted in a discussion of the proposal for the Services Directive of the EU, based upon the country-of-origin principle. In this thesis we will analyze whether the country-of-origin principle or the country-of-destination principle is best suited to capture the gains-of-trade that the common market hoards and improve welfare within the EU. We conclude that the country-of-origin principle is the more apt of the two, though it leads to some short-run costs such as structural unemployment. But these will be more than outweighed by the gains in aggregate welfare for the EU in the long run..

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

The aim of this thesis is to examine the fear of crime in old peoples lives. Notwithstanding that the age category is exposed to crime to a low degree, old people are experiencing a great fear of crime relative younger people. This is the paradox of fear, also recognized in gender studies. The question is how this paradox can be understood. To answer this, twelve elderly men and women have been interviewed and the reports about crime in the local newspaper, Norrköpings Tidningar, has been analyzed, through discourse analysis.The discursive construction of fear is here discussed in terms of discourses of a fearful society, and stereotypes of old age.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

Background: The real estate market has previously been subsidized by the government. The construction has been characterized by standardization and large scale complex. In the current situation there are other conditions on the real estate market, subsidies do not occur at the same degree and the market is more competitive. Customer influence has also changed. Today the customers want to customize their apartment by personal needs and lifestyle.

This report, written by Ma?ns Ridze?n and Jonas Stenberg, presents the thesis carried out the spring of 2012. The authors met the first time in 2008, when they started their studies at Uppsala University. Since then they have completed various projects, both within and without the university. This study is based on a theory that was first conceived when Jonas Stenberg did his internship in the summer of 2010.