The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This study is an initial attempt to investigate the relationship between banks and developers in Stockholm and its regions. It gives a good impression about the field of construction and project developments in terms of the finance and the negotiations associated with these types of projects. Main actors of the Stockholm?s construction financing market were of major interest for this study. On this regard, the relationships and ramifications of this group were investigated by using a qualitative and quantitative research method.

I denna rapport beskrivs effekterna av att införa flödesgrupper och andra Lean-principer i en verkstad med avseende på flexibilitet i volym och produktmix. Fallstudier har gjorts på tre tillverkningsföretag där man har infört flödesgrupper; Sandvik Coromant (Sandvik), Atlas Copco Tooling (Atlas) och Volvo Construction equipment (VCE).Efter att ha analyserat resultaten från fallstudierna kan konstateras att företag med hjälp av flödesgrupper och andra Lean-principer kan öka flexibiliteten i produktionen. De besökta företagen har erhållit liknande fördelar med avseende på flexibilitet efter införandet av flödesgrupper. Efter införandet fick man en kortare total genomloppstid för produkterna i verkstaden, vilket är indirekt kopplat till flexibilitet i både volym och produktmix. Den minskade genomloppstiden kunde erhållas dels tack vare enklare materialflöden och mindre rörelsesträckor för operatörer när maskiner flyttades närmare varandra till flödesgrupper.

Few studies enlighten the problem associated with the dialectical relationship between adults and adolescents and how that affects the construction of identity for adolescent?s, in relation to two areas that are closely bordering to each other but differs socioeconomically whereas one area is much weaker on resources than the other. These two areas is Högberget and Haganäs, which are situated in a larger city in Sweden.For us to be able to enlighten this problem we have chosen to use an inductive research approach so that we can explain how adolescents construct their identity and how the organized spare time, in addition with the influence of adults, impacts on adolescents construction of their identity.Therefore we have used interviews as method, both group and individual, so it can regulate which theories that influence our study. The two theories that wires through the entire study are firstly Peter L. Bergman and Thomas Luckmanns theory on social construction where the idea is that the human being is an active social being that constructs its own reality.

Since the 1990s, when the number of transnational companies increased, it has created challenges regarding the responsibility of human rights. As a response to these challenges the United Nations Human Rights Council (UNHRC) unanimously endorsed the new policy UN Guiding Principles on Business and Human Rights (UNGP) in 2011. UNGP does not have the status av international law, yet simply as guidelines and its implementation is based on good will and voluntary efforts. Now, 10 years later, this study aims to get understanding regarding if UNGP is considered as norm by the Swedish Government, Volvo and Gothenburg Municipality. The material of the study consists of sustainability reports, annual reports and governmental documents with focus on human rights in relation to business published between the year of 2011, when UNGP was endorsed, until 2020.

To be a part of the future we have to make a profit, one way to improve the profit margin is by reducing the fixed costs. This paper discusses the financial results of equipment cooperatives in crop production. Through a case study of three farms in Södermanland, we have an example of how it can look today and how it could look tomorrow. The three farms are crop-producing farms with slightly different orientation. Jursta Gård, 155 hectares, and Djursnäs Säteri, 215 hectares, have grains crop and oilseed crops as the main crops, and Nibble Gård, 340 hectares, mostly have pasturelands and some grain crops.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

A positive aspect of globalization, from a western viewpoint, is the growing demand of advanced products in China and other developing countries. The construction industry is thriving in China and Swedish companies have taken part in various projects. However the situation have been difficult for some of the companies. The aim of this study is therefore to investigate how strategic and cultural factors affect the potential for Swedish companies to operate on the Chinese construction market. The theoretical framework of the study consists of Porter?s and Kotler?s theories about strategy, and Hofstede?s, Bjerke?s, and Daun?s research about different cultures.

Everyone has to take a greater responsibility in energy issues, both individuals and companies. There have been some major developments in the construction industry but there is still a lot to be done. This diploma work thesis presents different methods of making existing construction shed establishments to use less energy. What is possible to do and how much energy is there to be saved? A shed establishment consisting of 8 shed units were studied in this project and the building simulation tool VIP-Energy was used to simulate different types of material in the sheds. An infrared camera was used to locate thermal bridges. There are several factors that can be improved to make a construction shed establishment to use less energy.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

The study took place at a food corporation in Växjö, Sweden. It describes a building that contains four tanks in which glucose syrup is stored. The purpose of the study was to calculate the amount of heat that leaves the building and the amount of heat that is supplied by the installed heating equipment. Before the calculations could be implemented, all the systems that supply the building with heat had to be examined. With a small amount of information from earlier studies, the work to gather all the data necessary for the calculations began.

As the final course in the education ?University Diploma Programme for Process Operators? there is a thesis in cooperation with a company required.This thesis is about operator maintenance and 5S made at Metsä Board in Husum.In this report you can read my opinions and conclusions based on literature studies and the interviews that have been made with the staff at PM6 (the paper machine).I chose to focus on the theory of lean, 5S and operator maintenance because it covers the area of this thesis.The operators shall do their rounds to make sure that the equipment works fine. They shall also write down things that they notice in a checklist. This is not done as it should be and the question is: can this be solved by using 5S?My conclusion of this thesis are:Better review of the task so that everyone is involved.

Volvo Aeros flygmotortillverkning i Trollhättan har infört ett antal nya detaljvarianter i produktionen. Detta har medfört att den robotcell som är avsedd att utföra en avgradningsoperation är i behov av uppdatering av både hårdvara och mjukvara. Denna rapport följer framtagningen av fixturkoncept som möjliggör att robotcellen kan användas även till de nya detaljerna. De förslag som arbetats fram sträcker sig från enklast möjliga till mer avancerade och nytänkande funktioner. Samtliga funktioner och koncept har genomgått gallringar i ett flertal steg.

Titel: Volvo On Call - en underskattad hjälp på vägen? En studie av internkommunikation mellan företag och återförsäljare.Författare: Elin Salekärr & Hanna TimringKurs: Medie- och kommunikationsvetenskap, ExamensarbeteTermin: Höstterminen 2007Syfte: Syftet med arbetet är att undersöka informationsflödet kring tjänsten Volvo On Call, med fokus på den interna informationen mellan Volvo Cars och dess återförsäljare.Metod och material: Undersökningen har gjorts genom fem kvalitativa informantintervjuer samt nitton telefonintervjuer som i viss mån ska fungera som kvantifierande. Såväl informanter som respondenter är säljare hos olika Volvohandlare inom ett specifikt geografiskt område, som valts ut med hänsyn till tidsbegränsning och liknande aspekter. Teorier rörande kommunikationsprocesser i stort har använts men med fokus på organisationers interna och marknadsmässiga kommunikation. Den interna kommunikationen syftar till att skapa en välfungerande organisation och ett företags marknadskommunikation syftar i sin tur till att gynna organisationen exempelvis ekonomiskt, då det oftast rör sig om reklam i olika former.Huvudresultat: De huvudresultat som framkommit i studien är att den låga försäljningen av tjänsten Volvo On Call beror på många olika faktorer.