A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

This study is done together with Sydved AB in the summer of 2012. The purpose of the study is to analyse how different quantity of assortments influence the production for forwarders and harvesters with multiple tree handling aggregate in thinning, by different tree volumes. To make this analyse a time study was performed where three entrepreneurs work has been analysed. Beside the analyse, of different quantity of assortments, has also been analysed how the tree volume and a forest fuel assortment effect the production. The result of this study shows that the quantities of assortments have a significant meaning for the production. The biggest differences are most distinct between one and three assortments in the smaller tree volumes where production goes down if the quantity of assortments increase.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

The purpose of this study was to examine the extent to which incontinence aids, used in local authority/municipal nursing homes, were adapted to the resident?s urine-leakage volume and to find out how nurses perceived the current situation concerning individual testing of incontinence aids in municipal nursing homes. The study method was a quantitative empirical study and was carried out in two phases. The first phase was a weighing test, carried out in three nursing homes, whereby the incontinence aids used by 25 residents during a 48 hour period were weighed. The second phase was the completion of a questionnaire by the municipal nurses working in the same local authority.

The purpose of this study is to investigate whether it is possible for SCA to update their stand register with use of digital aerial photos photographed with a Zeiss/Intergraph DMC. ?Updating? in this study implies the delineation of stands and estimating stand variables such as average stand height, volume density, stand volume, and tree species composition in order to identify stands which can be of current interest for thinning. The study also includes how the aerial photo material and experience of the interpreter can influence the quality of the interpreted variables. The aerial photo interpretations were made by both experienced and inexperienced interpreters.

Detta arbete undersöker 4 olika algoritmer som används för bred kollisionsdetektering. De olika metoderna för bred kollisionsdetektering kan delas in i 4 olika kategorier. Algoritmerna som är valda att representera varje kategori är Bruteforce, Sweep and prune, Hierarchical grid och Bounding volume hierarchy. Fokus i arbetet ligger i att mäta deras lämplighet för spelmotorer där det är viktigt att algoritmerna kan köras i realtid.Algoritmerna körs i simulationer av olika miljöer. Där antalet objekt, hur många som är rörliga och objektens distribution varieras mellan miljöerna.

3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

Intermodulated force microscope (ImAFM) is a type of dynamic AFM. ImAFM opens up possibilities for mapping the topography and making quantitative determinations of material parameters at the same time. With increased information the need to generate more informative images of the sample emerges. In this Bachelor's degree project I have created tools for rendering images of a sample. The topography is plotted as the height and a material parameter is color coded on topography.

För att skapa kraftfullare presentationer måste nya metoder implementeras för att visualisera projekt. Ett aktivitetshus för ungdomar visualiseras i detta projekt genom att 3D-modellen av huset placeras i ett filmklipp från den plats där huset skall stå. Stegen som togs för att realisera detta var förarbete i form av inskaffande av ritningar, filmande, matchmoving, 3D-modellering, rendering, compositing och ljuddesign. Resultatet blev ett filmklipp som ur ett första persons perspektiv både visar exteriören och interiören..

The visual complexity in real-time applications, like computer games, is increasing with customer demands on vissual apperance. This trend is supported by even better graphics cards from the hardvare industry. This must be taken into consideration when the architecture of a new graphics engine is to be designed. The engines renderer is responsible of generating a picture of scene data. The renderer must cope with increasingly more complex scenes, and must be able to render them depending on available hardvare capasity.

I denna uppsats beskrivs metoder för att skapa en arm i 3D samt att lägga in den i ett foto där den ersätter en riktigt arm. Anledningen till detta är att kunna skapa effekter i filmer och bilder som inte är möjliga med analog teknik. I denna uppsats kan man läsa om tekniker som används i varje del av utvecklingsprocessen och problem som uppstår samt lösningar och tips. I uppgiften finns det med delar som Modellering, Texturering, Rendering, Kamera Matchmoving och Compositing..

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

Koloni is a concert promoter that put up shows in lots of different locationswith a wide variety of music styles and artistic expressions. In this work I havecollected material from Koloni?s nine years of existence to form a volume. Thevolume tells the story of Koloni?s work, but also shed some light and understandingon the alternative cultural scene of today.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.