People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the waste management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Forest fertilization had its peak in the late 60´s, when almost 200 000 ha was fertilized annually. The silviculture of today has high demands for timber production at the same time as the demand for nature conservation increases. It means that it?s necessary to produce more volume in smaller areas in the future. The use of DGPS equipment has in modern forestry in Sweden become more and more common.

Zetterberg's Industri AB believe that capital and lead time will be reduced by implementing Kanban. Therefore, it was an investigation to prove that Kanban is an effective method. In this work a research had to be done to show how the material supply system looks like today and to explore the subframe components to see which components that are interesting from Kanban viewpoint. Previous orders of subframes were investigated. Therefore, it was a list of the various components of the previous orders for the subframe.

Erythropoiesis is a complex and carefully controlled process which is mainly regulated by erythropoietin. Using flow cytometry cells in a blood sample can be analyzed one by one. ADVIA 2120 using flow cytometry for analysis of red blood cells (RBC) and reticulocytes. Red blood cell distribution width (RDW) is a component of the RBC method. RDW indicates size variation on erythrocytes and is measured as a percentage of the mean cell volume (MCV). By measuring the RDW anemia can be divided into makrocytic, microcytic or normocytic. Reticulocytes refract light more strongly than red blood cells because they contain some cellular debris. The number of reticulocytes in the peripheral blood reflects erythropoiesis in the bone marrow. The purpose of this project was that by approved methods to establish reference ranges for the parameters, RDW and reticulocyte counts.The individuals who participated in the study, n=124, were considered healthy and had varying ethnicity. Reference subjects had not donated blood the last six months and participation in the study was voluntary.The statistic evaluation includes examination of distribution, and reference ranges for both men and women were established using the 2.5:t and 97.5:t percentiles. The calculated reference interval for RDW was between 12.0 ? 14.3% and the calculated reference interval for reticulocytes was between 38.0 ? 112.8 x109 cells/L. The results showed a significant difference between males and females for the parameter reticulocytes was seen. The difference indicates that different reference ranges should be established for men and women (p<0,0001). No significant difference between males and females were seen for RDW (p=0,74) indicating that the same reference ranges can be used for both men and women. .

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

With the increased volume of commercial content online, some news sites have adopted so-called native advertising on their websites to convey marketing messages more discreetly. As an increased share of advertising budgets is spent on this form of advertising this essay aims to examine its news consumer?s attitudes towards the phenomenon. The research was carried out through a qualitative study where news consumers discussed their attitudes in two separate focus groups. This was analyzed with the help of the previous studies Advertisement - an uninvited guest? and Banner Blindness as well as theories including theory of science hermeneutics, reception analysis, convergence culture, brand schema, advertising schema and ad- brand attitude.The results show that in most cases native advertising is met with indifferent attitudes but in some cases also confusion, which could lead to negative attitudes towards the ad and the news site.

AbstractPurpose/Aim: To investigate how the positions between the paper, the public and the elite in society have changed on Aftonbladets Op-Eds and Letter to the editor-pages between 1999 to 2005. In a wider context this means Aftonbladets potential to contribute to the role of the press as a forum of public debate.Material/Method: The study focuses on one week during 1999, 2002 and 2005. Here a quantitative contents analyse with inspiration from conversation (dialogue) analyse has been used.Main results: The study shows that the paper has strengthened its position over this period of time. Mainly by taking a more active role in forming and encouraging the debate. The public was given more space in 2002, then in 1999 and 2005.

Wood pellets are an upgraded product of residuals from several wood processing industries, for example saw mills and pulp industries. The pellets are produced by pressing the milled and dried sawdust to cylindrical units with a higher density than the initial raw material. Pellets have great benefits compared to the raw material: high energy per volume, good transport and storage properties and homogeneity. Several parameters collaborate in the whole process, which makes it complex. Wood is a heterogeneous material, chemically and structurally dependent on wood parts, habitat and storage procedures.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

Based on 30 years of work experience in TV and film production, I have made a phenomenological analysis of my perception of meaning in work - how it arises and how it is undermined. The story starts in my experience of early professional film making in the 1980's and describes how a change to work in TV production required the development of a new professional identity. The text also illustrates how as a female director I have managed my role in a male dominated and structured work environment. Being defined as an exception from the male norm has pushed me towards femininist reflection and the need to redefine my own work role - the generally accepted view having felt uncomfortable. An analysis of structural change in TV and film production shows how market pressures and ways of thought have increasingly invaded cultural endeavour. Professional spheres of influence are weakened, while developments in the media are characterised by a commercialism which encroaches more and more upon artistic, spiritual and moral values. This attitude, where quality is in retreat, has transformedprogramme makers from creative originators into becoming suppliers of raw material in a factory- like process geared to produce great volume at low cost.The aim of this essay is to show how changes in society and in TV and film making have affected my perception of my work.

This study was made on former agricultural areas that had been planted with spruce or pine, in the county of Västerbotten. The goal of the project was to investigate suspected deficiency of boron in these areas. Several objects have been reported for possible deficiency and some of these have the characteristic symptoms of boron-deficiency. The hypotheses are that 1) Boron deficiency is present at several of the investigated objects. 2) Planting of forest on cultivated postglacial sediments leads to a successive podzolisation with a decreasing content of organic matter in the mineral soil, due to decomposition, and a decreasing pH in the soil, even on locations that have been added lime. To be able to confirm or reject the hypotheses a number of tests were performed.