The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

The aim of this study is to investigate how multiple tree handling harvesters perform compared to earlier developed standards. The study shows that multiple tree handling harvesters are more efficient in thinnings stands with mean stock volumes less than 0,12 m3fub per stock. The increased efficiency is different for different mean stem classes. In stands with a mean stem volume of 0,04 m3fub per stock, the increase can be as high as 40 percent while it is about 10 percent in stands with a mean stem volume of 0,12 m3fub. Comparisons have been done between stands that are felled with partly limbed stands and stands without partly limbed assortments. The difference in performance is clear and shows that the partly limbed assortments strengthen the multiple tree handling harvesters positive effects in low dimension thinnings.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

This study investigates whether the permanent measurement bias (PMB) has changed over time for Swedish companies listed on the Stockholm Stock exchange at least one year during 1996-2000 or 2005-2010. By using the Residual Income Valuation-model the markets' implicit value on PMB is generated through reversed engineering, as values for all variables except PMB are entered such as the market perceived them at the specific valuation date each year. This implicit value is classified into industries and then sorted by their median. Statistical tests are performed to see if there is a difference between the industry median and the accounting-based values on PMB. The difference from period one to period two is also statistically tested for.The study finds that the implicit values on PMB have changed somewhat between the periods; however the fluctuations are not statistically significant.

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

When Norway spruce is planted with large initial spacing and grows on highly productive sites in southern Sweden, a high proportion of the stems gets broad annual rings. The thinning programme carried out at the estate of Trolleholm aims to extract stems with too broad ring width. The 3-4 first thinnings are carried out as thinning from above, where only the thickest trees are removed. The internal distance may not fall below 5-7 meters depending on the number of thinning (short distance in young stands). The aim of this study was to examine the thinning model that is carried out at the estate of Trolleholm. A volume table is calculated to describe the model, and data is collected on temporary plots.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).