The purpose of this paper is to analyze the project Knitting House using art and architectural theories to question the forms of the project as well as the town planning in the area of Husby, a suburb to Stockholm. In order to stress the architectural issues in the area of Husby, the thesis examines the aim and intention of the project Knitting House. The project explores the standardized architectural form that was used and built under the Miljonprogrammet, through the years of 1960-1970 in the neighborhoods of Järvafältet. The thesis will also investigate some of the problems that arise when attempting to discuss knitting as a method used to perform Knitting House. This paper explores the relationships between public and private spaces, the areas in between them and how they interact. The claim made throughout the thesis is that Knitting House can function as a political catalyst by presenting a combined perspective of art, architecture and politics to address the social and ethnic segregation in suburbs like Husby. .

As technology have continued to develop over the latest decades and become more advanced the pressure on the general citizens understanding of technology becomes a essential part to live in our society today. The transition have affected our society in great ways and have made a great impact on different groups, one of them being the elderly population in our society. The purpose of this study is to examine how the fast technological development in the latest decades have affected the elderly in our society. This from their perspective by gathering empirical data through semi-structured interviews with elderly people involved in the Agnes-project, a research project focused on improving the general quality of life for older people and increase their knowledge about technology. The study has shown that after the older peoples time involved in the Agnes-project their quality of life had improved in different areas. Areas such as increased cognitive activity, increased interest in new technology and an improvement in their communication with friends and family.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

Digital games are today avaliable on all kinds of different platform. Games and game thinking is also increasingly being applied within non-traditional contexts. This thesis explores the term "gamifiation" which can be defined as "the use of game design elements in non-game contexts". The purpose of the study was to identify and give perspective on the discourse surrounding the use and applicability of the term today. More specifically, it explores the possibilities of the potentially value creating ability in the context of work, and focused on the application of gamified software in the context of project work.

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..

Edsbyverken Office Furniture has over the past 100 years been producing delicate carpentry products, chairs and skiis, but more recently the focus has shifted to furniture for the modern office environment. With a wide selection of products and its characteristic neutral design, Edsbyverken has an extensive group of clients both in Sweden and internationally. The aim of my C level thesis project was to examine the materials Edsbyverken is currently using in order to develop new designs or product functions. Simultanesously, I also wanted to verify whether the method I developed for this project - to initially undertake a comprehensive study of the chosen materials and thereafter specialise on a certain product and target audience ? was effective and successful.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Compared to all existing ethnic groups in Sweden, the integration of Somali women has failed the most within the aspect of employment. This bachelor?s thesis investigates the obstacles in the integration of Somali women by focusing on one case, a project named ?Kvinnokraft?, partly financed by the European Socialfund.By interviewing eight key actors, opinions about obstacles in the project have been identified. A theoretical framework that incorporates integration, project research, multi-level governance and intersectionality contributes to explaining difficulties in integrating Somali women.The empirical findings show that there are individual, social and institutional holdbacks. Stereotypical perceptions were common amongst officials, which contributes to a creation of an inferior position in the structures of the society for Somali women.

We got in contact with Marco AB, who we?ve had contact with before concerning earlier projects, to find out if they were interested in arranging a larger project for our last class (Examensarbete 15hp). They were very positive to this proposition, and soon they offered us a project regarding reconstruction of their current mechanical device that absorbs all the force from the lift itself when it is at a predefined level (sv. sjunkspärr). The current solution does fulfill the requirements that are given, however it is not a solution that gives a high level of satisfactory.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

This examination project is an investigation about the opinion and comprehension for political engagement of four young municipal politicians. The purpose with this project is to describe and understand the pronounced comprehension for political engagement. There is also an intention to investigate the educational in discussing political engagement with students in social studies at upper secondary school. The method that has been used is ?map of conceptions? because of its appropriate way to elucidate the comprehension and understanding of a certain subject. Those four young municipal politicians see political engagement as the will to improve the community. There is also an importance to have a large engagement in more areas than just one.

During the period of this project I have programed a web site in php4, and also built the database in MySQL. The purpose with the projekt is to create a common web site for the various activities in the different churches located in the area of Örnsköldsvik. In my project I have chosen to try to find a structure of programming that fits my needs as a dyslexic. In the essay you can find a more thorough description of my procedure and the structure that I have chosen to use. .

ABSTRACTThe purpose of our study was to examine how four different organizations cooperate on rehabilitation of people to get them back to employment. More specifically our aim was to investigate how different organizations in a project, involving workrehabilitation, looks at cooperation. Our main questions were vague at the beginning of our study, but finally our focus became clear. The questions were formed with help from the research of Hjortsjö (2006) and Fridolf (2000): Which possibilities and hindrances identify the different organizations which cooperate? What does cooperation mean to the representatives from the different organizations which are included in KARB? Our result shows that the respondents mostly think positive of the project KARB.