Lame dogs are a common group of patients for the practicing veterinarian. In the literature it is described how a clinical examination can be performed, based on general clinical-, orthopedic- and neurological examination, and visual evaluation of the dog when standing and during motion. For research, objective gait analysis systems are also used to study clinically healthy and lame dogs during motion. The aim of this degree project was to compare objective kinematic gait analysis with a visual evaluation of dogs with different types of lameness. The project was a pilot study to show if objective gait analysis could be used as a support for the visual examination. Ten lame dogs of different breeds and with different diagnoses were included in the study. They were all patients at the University Animal hospital, Uppsala.

During our education to become lighting designers at Jönköping University, the artificial lighting has been in focus. Therefore we wanted to learn more about daylight. We chose to do this from a visual approach in open plan offices. Since daylight is part of the architects´ responsibility to master, we wanted to examine what architects think of when they plan daylight environments in open plan offices and how this is expressed in the buildings with focus on the visual factors.Our questions at issue are:What knowledge do architects have concerning daylight planning, and how do they use this knowledge in their practice?How well do the chosen daylight environments meet the end-users need of a good visual environment? The study consists of three case studies, carried out in the same way.

This study explores how consumers' attitudes and intentions-to-buy towards an atypical product can be influenced by the presentation of the product and consumers shopping goals. Moreover, another product, which was shown together with the atypical piece, was analyzed in order to investigate context effects. The aim of the study is to provide insights into a rather unexplored subject and help retailers in presenting their assortment in a way which will create a better perception and intention-to-buy towards the assortment. The study was conducted with the help of two studies, the first one aimed to find an atypical item and to see how attitudes could be affected by differences in presentation by comparing it with a typical item within the same category. The second study used the identified atypical piece in order to see the how attitude and intention-to-buy could be altered by presentation and consumer shopping goals.

It is important, for companies operating on a homogeneous product market, to understand and adapt to customer needs. Since coffee is a homogeneous product in food retail it is vital for coffee companies to work extensively with differentiation and the fierce competition. The prevailing homogenity makes it difficult for companies to develop the product itself and must therefore work to create added value to the product.The purpose of this thesis is to carry out a study on consumer decision-making when purchasing homogeneous products, and to examine how companies work to strengthen their brand and gain market share in a homogeneous product market. The market that this thesis highlights is the coffee market.To answer the purpose of this thesis the writers have conducted a questionnaire survey regarding consumers? decision-making process and interviewed two marketing managers for two major actors on the coffee market.

In 2011, I and fellow student at Gotland University created a multimedia game. To fit the time constraints a ?vertical slice? was created. This means a small sample of the game is taken which allows the user to understand how the game works, and at the same time, get a visual demonstration of how the game is designed. The goal of the project was to create a narrative for stadium games in which the backstory is told as players interact with their surroundings.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

Title: Experiences of Banner advertisement on a specialized homepage Author: Marcus Westerberg Supervisor: Marie Hemming Department: Department of Business Administration, IEM Course: Bachelor thesis in Business Administration, FEC 007 Purpose: Create a understanding for how the users on Internet pages experience the occurrence and the shape of the banners. Method: Methods used are quantitative and qualitative, and the facts and figures are based on a pop up inquiry and some telephoneinterviews. I elected pop up inquiry and telephoneinterview as my data collection. My inquiry had a high grade of standardization and the interviews had a low grade of standardization. Result: On the basis of the question of issue I have drawn the conclusion that the users feels that it is important with information in all advertising.

The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

The catchphrase this project has been; the boundaries between ornamentation and improvisation are fluid.My aim was to focus on my work process, giving me the space and time so develop my design further regarding shape, color and combination of different styles in patterns.This is an explorative project where patterns were created without a predetermined product of which the patterns would be applied. In a later stage the character of the pattern determined which product that would be most suitable for application.It resulted in a collection of patterns for wallpaper and clothing. The motives are foxes, geometrical shapes and squares from a notebook. These motives form an ornamental expression in the patterns with the purpose of embellishment and therefore increase the emotional value of the product..

The task of this project was to build an computer processing system for pressureregulation, in which the pressure loss over the open hydrolicvalve should be kept as low as possible. By using an cross connected proportional directional valve the valve problem could be solved. The control- and regulationproblem for the pressureregulation system was solved by using the DAQ- card NI6035E from National Instruments and the computerprogram Automatic Pressure Control 1.0 which has been software developed and written in Visual Basic. The final result showed that correct processvarible was obtained in 0,5 seconds, when the setpoint was changed in the testarea 0 - 2,5 MPa..

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

Product development is a risky business; many products never yield profit, but it is also ne-cessary for a company?s survival in a competitive business where the costumers change their requests constantly. Consumer-led product development is developed from the wish to fill the consumer?s needs and expectations and thereby be more likely to succeed. Lindell?s Gårdsslakteri AB is a local slaughter and meat processor in Västergötland.

Scarcity due to supply, demand or in time is all factors that affect consumers´buying behavior. The scarcity principle describes how scarce resources appear moreattractive to the customer's eyes than unlimited does. When something is scar thecustomer often draws parallels to the quality and price, that the product will bemore expensive and better. People hate to be deprived of choices. When a certainproduct is scar, the customer will desire the product even more.

The project this report is handling has been implemented on NBB, Nordisk Bilbelysning AB in Linköping. The company produces and develops lightning and searchlights for all types of vehicles. Lately NBB´s supplier of electronics, OSRAM, has developed a mercuryfree xenon lightsource. Mercury is one of the most hazardous environmental waste and to get rid of the mercury entirely in the lightsource is a big step that means alot for the environment.This lightsource will be placed in one of NBB´s worksearchlights called My, and will be sold as an alternative to mercurycontaining searchlights. NBB wants to put an environmental label on this product and they want to have essential information about the product that is needed for the production.