The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

In the city of Kungälv, there are many important green areas without park lightning. This makes it unsafe to walk through the city's most attractive surroundings during many parts of the year. Partly in general and partly specifically for Kungälv, this paper shows that there are strong long-term arguments for making parks available by the use of lightning. This is not about lightening up the whole city, but finding the important green communication paths and parks. This paper also reflects upon how to lighten up these green communication paths and parks for best result. That is a question about creating good sight conditions ? safe and attractive parks which attracts people to use them. Offering a city's inhabitants good and attractive alternatives to using the car is an important task for city planers.

Through extensive research it has shown that today?s sail boat owners are very frustrated concerning the limited choice of engine alternatives offered by today?s market. Besides rising fuel-costs, environmental awareness is very important in today?s society. Hence it is vital to find alternative environmental-friendly motors and replace combustion-engines. Zilent Ocean is an extensive project within Development engineering program at Halmstad University.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This degree project summarizes five years of education at the landscape architecture program at the Swedish University of Agriculture Sciences, SLU, Alnarp and the School of architecture at Royal Institute of Technology, KTH, Stockholm. The project has been carried out by Lovisa Berg and Per Crona in collaboration with DRIFT Scenkonst. This master project is based on the ongoing transformation of a former mining site in Ställberg, Bergslagen situated in central Sweden. The organization DRIFT is in the process of recreating to former industrial mining site as a green cultural center. Their field of artistic examination concerns existential questions connected to the site. The aim is to offer a place for both performing and experiencing contemporary performing arts in Bergslagen. Our objective is to contribute to the growth of the performing arts project and to demonstrate in concrete terms how a conversion of a mining area can be completed, while taking into account both its history and its new function.

Titel: e-Commerce and Relationships ? Customer Relationship Management This bachelor thesis is brought together to analyze the transformation from traditional marketing to Customer Relationship Management. The development in the technology world has made the marketing focus shift from products and their functionality to customers and value creation. Because of the tougher competition that developed from new channels of communication, corporations had to generate new sources of value for their customers in order to establish lasting relationships with them. Therefore we found it interesting to investigate how companies within the e-commerce business handle the transition towards customer relationship management.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

Ragnarök Online en plats på nätet, ett online-spel, där människor från hela världen möts och samverkar. Det är i detta möte personer emellan som den virtuella miljön Ragnarök Online skapas. Målet med denna uppsats är att visa på hur människor interagerar i, och skapar denna plats på nätet. Varför spenderar folk tid i virtuella miljöer? Är det annorlunda att agera i en virtuell miljö? Dessa är några av de frågor vi kommer att möta i texten.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

Detta kandidatarbete fokuserar på att undersöka aspekter som kan förstärka en användares upplevelse inom digitala spel. De aspekter som vi valt att fokusera på är användandet av Oculus Rift och Motion Capture då de tar upp viktiga punkter som Virtual Reality, närvaro och inlevelse i spel. Vi valde även att fokusera vår produktion mot skräckgenren då detta är ett område vi båda har stor passion för i diverse media. I vårt arbete har vi fått fram en hypotes om att spel som fokuserar på att lämna karaktären i ett tomt skal (ingen personlighet), lämnar en större chans för inlevelse hos spelaren då användarens egna känslor speglas på karaktären. Användandet av Oculus Rift och realistiska röresler via Motion Capture har en tendens att även stärka detta..

In many products a compromise between ground clearance and the required space to store the product has to be made. This problem attracted the attention of the authors of this thesis.The objective of this project is to develop a functioning solution to a foldable wheel. The solution should be applicable to several types of product groups. A limitation for this work has been made so that the work only covers solutions for lighter vehicles.The purpose is to drive this project forward, so that a solution can be found. Furthermore the purpose of the report is to clarify how the authors proceeded to design and construct the wheel according to a fixed specification.

Collaborative planning ? a comparative study of theory and practice Why There is today, according to my experience, a growing interest and demand for a more inclusive and transparent planning process. Also, if we are going to be able to reach a truly sustainable society it is my belief that there is a need for a more integrated collaboration between different actors. Where the social, economic and ecological values can influence and benefit from each other. The question then is, how can the planning system accommodate that kind of collaboration? Purpose My aim for this thesis has been to study a selection of the theoretical work that exist about collaborative planning.

The purpose of this study is to examine which aspects of blogs and blog design that are important to blog readers but also to find new ideas for blog design. From a qualitative standpoint we have examined how seven users experience that blogs design, structure and functionalities affects the general experience of the blog. The study also examines how the users wish to interact with a blog. During two design workshops we let seven active blog readers imagine and sketch out the design and functionalities they would like in a blog. We put this in relation to theories about the anatomy of blogs, methods of design, social navigation and virtual communities.The major finding is that the aspects most important to blog readers are navigation, structure and social interaction.

The remotely operated underwater vehicles that the client develops have needs of different kinds of data channels. In order to minimize the need of physical cable between the control unit and a ROV, a multiplex protocol has been developed. The protocol has been designed with the aim of using the bandwidth of the transferring link as efficient as possible.The different kinds of data channels used during this thesis project is; RS232, RS485 and CAN. ROM and FIFO-memories have been used to be able to effectively manage the different data channels. All the reading and sending of these channels have been implemented in FPGA-technology, the coding is made generic so that it will be easier to add more channels to the system in the future.The multiplex protocol is a modified version of the method STDM and it is a proprietary protocol.

Risk management is a key competency that is constantly being researched how it can be improved within project management. The risk management process consists of four major steps: identify risks, assess the risks? significance on the project, evaluate and address the key risks and follow up.The majority of companies seem to neglect certain identified risks, and decide not to mitigate if the risk does not cause adverse effects to the business. To counteract undesirable consequences and help organisations to become more effective at managing risks an initial work has been conducted for a risk repository.The project develops a proposal on the design of a risk repository which aim to effectively support a database implementation. The study includes literature studies which resulted in a relational model for database implementation.