Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design 21 hp.

I chose to do this work because I believe that today?s industrial designprofessionals lack in their task of creating aesthetic experiences and aestheticdiversity.With my work, I want to question why the majority of today?s technical, massproducedeveryday products have such a similar design expression, andwhy alternatives are so few. Most of all, I take a critical attitude to today?sstereotypical industrial design aesthetics that I would describe as technical,masculine, and unnecessarily complex.I have designed a number of products that show alternative aesthetics in thissegment and as such I have chosen the vacuum cleaner. The idea is that mydesign will serve as an eye opener and demonstrate that there are alternativesto today?s homogeneous market.The result is three vacuum cleaners claiming three alternatives to currentofferings.

Kockums i Karlskrona har givit i uppdrag att ta fram lösningar till öppningsmekanismen för större bordläggningsluckor på marina ytfartyg. De önskar att luckans dimension ska vara max 10 * 3 m. I uppgiften ingår att ta fram en lösning på öppningsmekanism, simulera öppning och stängningsförloppet i Virtual Reality samt utvärdera konstruktionen enligt givna lastfall. Acceleration är ett exempel på laster som luckan kan tänkas utsättas för under öppet läge samt under öppning och stängning. Första delen av rapporten innehåller principkonstruktionen, här har det tagits fram ett antal lösningsförslag som visas med enkla skisser.

In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.

This study is essentially based on my own questions concerning contemporary playgrounds. Why are they so unimaginative? What do the children say about them? Is it possible to create playgrounds less constructed, and with more natural elements? This report starts with references to literature studies, personal references and my personal view, and ends with a suggestion for a physical solution for an actual day care centre. The aim is to learn more about how the natural environment affects children, the importance of playing, and try to use this knowledge in a design of a day care centre. My main theme can be summarized in the following question: Why is natural elements in playgrounds considered to be healthy for children? I wanted to create a playground with natural characteristics which I myself would have appreciated as a child.

The governing set of regulations for structural engineering in Sweden used to be Boverket, BKR. However in the beginning of the 21st century a changeover to new regulations, the Eurocodes, started.The transition was completed in year 2011 when the Eurocodes became the mandatory design work policy for all countries within the European Union. The Eurocodes were implemented to simplify and remove potential barriers to trade that may exist when countries have different design rules.  Since the changeover it has been important for all construction companies to update their knowledge base and their design software.When comparing the two calculation processes they seem similar, but there are a couple of differences worth noting.  With the new regulations, engineers will find that the process when designing joints in timber structures has changed.  What used to be a fairly easy and straight forward calculation procedure has now become tedious and time consuming.The objective of this degree project is to present a product, a dimensioning tool that will help structural engineers when computing lateral load carrying joints in timber structures.The degree project is made up of two parts where the first part is the written report describing the background and theory behind load carrying computations. The second part of the project is the actual dimensioning tool which includes several worksheets in Microsoft Excel. The program treats single and double shear connections of the following:Nail jointsScrew jointsSteel plates (thick and thin types) The user can edit the following parameters:Type of plate/ number of shearsStrength class of timber membersMember and plate sizeType of fastenerDiameter of fastenerLength of fastenerYield moment of fastenerkmod and partial factors for design load carrying capacityThe dimensioning tool was created and developed in collaboration with structural engineers at the company Byggteknik AB.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

This report presents the development process of a mobile interface for the C2-monitor. A monitoring tool used to support the operations for the broadcasting services of Ericsson Broadcasting and Media Services (EBMS). With the support of the C2-monitor, operators can monitor hundreds of channels and services produced from EBMS. To enhance a more flexible working environment, the C2-monitor needs to be developed further to support mobile devices with a customized design to take advantage of mobile phones features and functionality. Established and well-recognized design methods and principles have been applied in the development process and user testing have been made iteratively throughout the project.

Syftet med detta projekt är att utvärdera ModFix som verktyg och arbetsmetoden för att skaps fixturer med ModFix. ModFix är ett verktyg som är integrerad i Siemens simuleringsmiljön Process Simulate och används för att skapa modulära fixturer. Målsättningen med arbetsmetoden där fixturer skapas med ModFix är att ledtiden och mantimmarna för att skapa fixturer ska reduceras med 50 % i jämförelse med Volvo Cars nuvarande arbetsmetod där fixturer skapas med Catia V5.ModFix-verktyget består av tre funktioner. Dessa funktioner är; Configuration Administrator, Fixture Designer och Modular Fixture Mapping Report. Configuration Administrator är ModFix´s administrationsverktyg och används för att skapa de fixturbaser och fixturkonfigurationer som senare används för att skapa modulära fixturer med Fixture Designer.

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

Tobii Technology AB is a global leading company in eye tracking. The technology is a part of acomputer screen called an eye tracker. It enables computers to follow eye movement whichfurther make it possible to control the computer by only using your eyes.The mission was to develop an arcade game for eye controlled games that Tobii can use in theirmarketing or as a tool when doing researches about the interest in the technology amongst gamecompanies. The product realization involved designing an innovative, functional and futuristiccase which gathered the existing hardware and software to build the final prototype. In order toattract users it was important to focus on the visual expressions.Initially, the project started off with an information retrieval which contained interviews, fieldstudies, tests and literature studies.

Design principles are usually used by interaction designers to help creating a user friendly design by making the designer think about the different aspects of the design. These design principles has been further developed since they emerged in the 1990s, and today they're often used in the field of interaction design. By using the design principles, bad design can be avoided and the frustration of the user reduced. Design patterns is described as structural and behavioral characteristics to improve the environment in user interface amongst other areas. These characteristics could make things easier to understand or improve their appearance, they make tools more usable.The purpose with this essay is to identify design guidelinesto be used by developers when designing surveillance systems.

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

This paper contains a study where we apply cross media and storytelling into the design process of a practical commercial campaign. The purpose is to learn more and deeper by using cross media and the ideal of storytelling practical. We applied a qualitative method for research of the project to provide a high-quality empirical work. The result shows that by using well-structured story early in the design process you will easily succeed with your cross media design..