This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

The graduation essay has been carried out in co-operation with Kalmar Industries in Lidhult, Sweden. The purpose of our essay was to develop a complete construction solution on a hoist that could lift a laying wheel, lift it up and then turn it 90 degrees. After that the wheel shall be placed in a special holder.The background of the essay is a record of reports of damage wheels when they been incorrect lifted with a forklift. The hoist shall be used together with the same forklifts that manage the wheels today. Together with our instructor at Kalmar Industries we developed a requirement specification and from that we got free hands.However this was not the main task from the beginning, then a simular hoist should be develop but used directly in the assembly workshop without using a forklift.We started to find principle solutions that later was evaluated against the requirement specification.

This essays purpose is to accentuate the meaning of the knowledge of the design elements color, formand texture in the hair design education. Both the Bauhaus school and Pivot Point educationcampaign close knowledge in color, form and texture. In my study of the literature I compared theBauhaus school with Pivot Point International Inc, study material for hair design education. From thesimilarities in this material I develop a project in color, form and texture. This was a teaching test forstudents in the hair design education at the upper secondary.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

Efforts to achieve a moisture proof construction process have proved to be considerably complicated, despite the knowledge and awareness that now exists within the moisture field. Materials, documents, templates and checklists are designed to be accessed but are not used anyway. This may be because such effort has not been prioritized and properly requirements have not existed from the commissioner of a building.This report illustrates how the commissioner of a building project can achieve a moisture proof building process by increasing knowledge, moisture proof planning, and implementation of security moisture routines. Proposals are given on how the commissioner of a building project can work to consistently bring a moisture proof building process in all stages. The difficulty with regular moisture proof efforts, the authors believe is mainly due to the following points:      Many different design solutions.      Lack of experience feedback.      Lack of communication.      Financial incentives.      Attitudes.The interviews in the report have conducted with the help of a qualitative analysis, while the survey has been done using a quantitative analytical method.

The aim has been to investigate and describe how gender-neutral design, concerning typefaces and colours, can be created. Based on my results I?ve designed a cover for a recipe-book to make it appealing to both women and men. I have been doing my research based on questions such as; Does feminine and masculine design, concerning typefaces and colours exist? And if so what characterizes it? Does gender-neutral design, concerning typefaces and colours exist? And if so what characterizes it? Is it possible to design a cover for a recipe-book in a gender-neutral way, concerning typefaces and colours? The first part of my research consists of a literature study based on keywords such as gender, graphic design, gender theory, typeface, androgynous, visual communication, colour, shape, feminine, masculine, and book design.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

It has now passed two years since the new site- and construction law, PBL, went into force. It replaced the previous PBL applicable since 1987, and it involves relatively large changes in many different areas of the construction sector. The ambitions of the new law are for instance to simplify and clarify the legal text, increase efficiency in the permitting processes and improve the quality of construction. To achieve this, a variety of changes was made. Some of the most important are: inserted deadline in the processing of building applications, extended assessment of building applications, revised rules about controlplan and quality manager, a certificate is required to start and end the project, an additional meeting is inserted and the construction management of the municipalities will have to do a mandatory visit at the work scene.

The aim of this study was to design short interventions based on the literature study, which will change the pupils? posture on mathematics and connections between problem-solving in mathematics and everyday life. An experimental group of 17 pupils in fifth grade participated in the study and were educated in everyday mathematics 20 minutes a day during four weeks. The intervention was measured in a pre- and after questionnaire, in order to control the design and discover possible changes in the pupils? posture on mathematics and connections between problems and everyday life.

This study investigates if, and in that case, how design theory is applied in practice in the web development field. Prior research has focused on methods used in the web development field. We wanted to study the designers role in a web design process by comparing existing designer roles with design theory literature. We did qualitative interviews with two practitioners at two different communication agencies in northern Sweden. Based on our qualitative data and literature review we have concluded that a designer has to devote a lot of energy on requirements engineering in order to develop a clear understanding of the design situation..

Dooria Sweden AB is one of the main door- and doorframe manufacturers inSweden. They deliver door frames for indoor use for project oriented buildingsites, for these types of building sites the doorpost comes pre-assembled. DooriaAB wants to minimize transport to reduce impact on environment and thetransportation costs of pre-assembled doorframes, this thru simplifying themethod of assembly.The main purpose of this thesis has been to develop a prototype solution thatbrings the three parts of the doorframe together with the same properties regardingstability and tightness of joints as the current method of assembly. A profile ofdemands and wishes were created in collaboration with Mårten Dragstedt, DeputyDirector of Dooria Sverige ABBy following the chosen method the authors have been able to produce a fullyfunctional prototype that meet the demands that were put on the product. Catia V5R20 has been used as an aid during prototype construction and virtual tests.

Detta examensarbete syftade till att utveckla ett koncept på en Rollator, ett gå-hjälpmedel för människor vars gång är funktionsnedsatt. Målet med arbetet var att förbättra utgångskonceptet med en smartare och mer tillverkningsvänlig design samtidigt som rollatorn får ett enhetligt design/formspråk. .

AbstractConcrete foundation slabs are usually exposed to unilateral drying during the curing process. The unilateral drying causes an axial shrinkage and a concave curvature of the construction. The curvature results from the fact that the upper part of the slab is drying and shrinking faster than the lower part. This is called gradient shrinkage.A problem occurs when the slab is considered fully restrained by adjoining structural parts. The deformations caused by axial contraction due to the constant part of the shrinkage and the curvature caused by gradient shrinkage of the slab are then prevented by the fact that the slab is fully restrained.

The aim of this thesis is to explore the relationship between the surrounding world and the library with respect to the library?s need to provide a Library 2.0 web site. We also explore the relationship between the physical and the virtual library. Our research objects are the public libraries of Stockholm and the Umeå region, that maintain the web sites Biblioteket.se and minabibliotek.se respectively. By applying Dorte Skot-Hansen's theory of rationales we found that the Stockholm public library is acting in accordance with the experience rationale, whereas the libraries of Umeå are influenced by the instrumental rationale.