The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

I denna rapport har det utförts två fallstudier från två olika vindkraftsanläggningar och med hjälp av en utarbetad modell har livscykelkostnaderna jämförts för de två fallstudierna.Resultatet visade att livscykelkostnaden per producerad kWh sjunker allteftersom den installerade effekten blir högre.Kostnadsmodellen som utarbetats och tillämpats för resultaten har visat sig ha hög verifierbarhet då resultaten har varit jämförbara med litterära studier..

Digital preservation is a relatively new subject to Swedish archives. Alhough computers have been used for a long time, preservation has been made on paper and stored on shelves. These days a lot of cities in Sweden have investigated how to best secure the digital information for the future through electronic archiving, e-archives. One option is to hand in the information as soon as possible, but to let the producer keep the information ownership yet some time. The idea is to let the producers of the information answer questions and hand out material, since they are more competent on their field.

Syfte: Syftet med denna uppsats är att studera om förändringar i arbetet med rörelsekapital hade ett samband med lönsamheten i företag. Som mått på rörelsekapital används Cash Conversion Cycle och som mått på lönsamhet används ROA.Teoretiskt perspektiv: Den teoretiska referensramen består av teorier om Working Capital Management, Cash Conversion Cycle, Lean, Supply Chain Management och Supply Chain Finance.Metod: I denna uppsats används en kvantitativ metod där sekundärdata samlas in från årsredovisningar för 2005 och 2013. Denna data ligger till grund för fyra korrelationsanalyser. Den beroende variabeln i korrelationsanalyserna är ROA och defyra oberoende variablerna är Cash Conversion Cycle, dagar i lager, dagar som kundfordring och dagar som leverantörsskuld. Urvalet i denna studie består av svenska aktiebolag inom branschen tillverkning och industri med fler än 50 anställda.Empiri: Empirin består av fyra tabeller som presenterar de beräkningar som gjorts.Slutsats: Sambandet mellan förändring i Cash Conversion Cycle och förändring i ROA blev väldigt svagt positivt men inte signifikant.

Single vehicle accidents are one of the most common types of accidents that occur on the Swedish road network. Depending on the design of the road, the presence of a crash barrier and embankment on the roadside, the outcome of a roadside collision can lead to serious injuries and even deaths.The aim of this project is to investigate the possibility of improving road safety by designing the optimal roadside area based on the results of a life cycle cost analysis (LCC).The questions that have been answered during the duration of this project are:1) Describe the current technical solutions for roadside area design and the various barrier types used in Sweden.2) Complete an existing mathematical model that has been developed by Hawzheen Karim, for calculating life-cycle costs for various roadside areas.3) Calculate and compare the life cycle costs for the side area with a barrier and without a barrier.By performing an analysis of the documentation on the current guidelines and rules for shaping the roadside, was it possible to describe the current technical solutions for the formation the roadside as well as the current roadside barriers in use today. A mathematical model for calculating the life cycle costs of different barrier types had already been developed by Hawzheen Karim. This model was supplemented so that it could calculate life-cycle costs of the roadside region with and without a barrier. After the model was completed, an analysis was performed to obtain life-cycle costs of a roadside with and without a barrier.The result showed that there is a clear relationship between the slope inclination, fill height, and the rate at which the costs rise.

Syfte: Syftet med denna uppsats är att studera om förändringar i arbetet med rörelsekapital hade ett samband med lönsamheten i företag. Som mått på rörelsekapital används Cash Conversion Cycle och som mått på lönsamhet används ROA.Teoretiskt perspektiv: Den teoretiska referensramen består av teorier om Working Capital Management, Cash Conversion Cycle, Lean, Supply Chain Management och Supply Chain Finance.Metod: I denna uppsats används en kvantitativ metod där sekundärdata samlas in från årsredovisningar för 2005 och 2013. Denna data ligger till grund för fyra korrelationsanalyser. Den beroende variabeln i korrelationsanalyserna är ROA och defyra oberoende variablerna är Cash Conversion Cycle, dagar i lager, dagar som kundfordring och dagar som leverantörsskuld. Urvalet i denna studie består av svenska aktiebolag inom branschen tillverkning och industri med fler än 50 anställda.Empiri: Empirin består av fyra tabeller som presenterar de beräkningar som gjorts.Slutsats: Sambandet mellan förändring i Cash Conversion Cycle och förändring i ROA blev väldigt svagt positivt men inte signifikant.

Our common future involves many important challenges. People and nature need to improve the relationship in order to reach an ecologically sustainable development. In a society where consumption of products steadily increases, the consumer awareness about social and environmental issues connected to the products becomes an importent factor. More and more companies choose to work more actively with these issues and more and more products get labelled by some of the eco labelling organisations. From the cradle to the gate means that a study has been done on a part of a products life cycle.

Syfte: Syftet med denna uppsats är att studera om förändringar i arbetet med rörelsekapital hade ett samband med lönsamheten i företag. Som mått på rörelsekapital används Cash Conversion Cycle och som mått på lönsamhet används ROA.Teoretiskt perspektiv: Den teoretiska referensramen består av teorier om Working Capital Management, Cash Conversion Cycle, Lean, Supply Chain Management och Supply Chain Finance.Metod: I denna uppsats används en kvantitativ metod där sekundärdata samlas in från årsredovisningar för 2005 och 2013. Denna data ligger till grund för fyra korrelationsanalyser. Den beroende variabeln i korrelationsanalyserna är ROA och defyra oberoende variablerna är Cash Conversion Cycle, dagar i lager, dagar som kundfordring och dagar som leverantörsskuld. Urvalet i denna studie består av svenska aktiebolag inom branschen tillverkning och industri med fler än 50 anställda.Empiri: Empirin består av fyra tabeller som presenterar de beräkningar som gjorts.Slutsats: Sambandet mellan förändring i Cash Conversion Cycle och förändring i ROA blev väldigt svagt positivt men inte signifikant.

This study aims to scrutinize the four major banks in Sweden on how their profit havedeveloped over a time span of 15 years, whether stricter regulations have had anyimpact on financial key ratios and if there is any correlation between the banksprofitability and their risk taking. The period covered is the years 2000-2014. Thefigures are annually and the four major banks are; Handelsbanken, Nordea,Skandiviska Enskilda Banken (SEB) and Swedbank.The findings are that financial key ratios that include net income are pro-cycle whereSwedbank has the biggest volatility over the period and that the three other banks areless, but clear pro-cycle. There are also indications that stricter rules have madeimpact on the volatility of the profitability even though the period covered is notenough to ensure this claim. Nordea has had the lowest and most stable capital ratiothroughout the period and the other three banks lowered their debt-to-equity ratiosignificantly after the financial crisis in 2008.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

One way of signalling commands to the horse during riding is through applying tension on the reins to create bit pressure in the horse?s mouth (Terada et al., 2006; Clayton et al., 2011). The skilfulness of the rider in using the hands when applying bit pressure has consequences both for the horse?s performance and welfare (Manfredi et al., 2010). At the trot there are large vertical deviations of the horse?s body which the rider must adjust and adapt to (Terada et al., 2006) and an unsteady hand due to inability to follow the horse?s movement can be a source of discomfort and conflict behaviour in the horse (Heleski et al., 2009).

Effects of Menstrual Cycle and Oral Contraceptives on Sport Performance During the menstrual cycle, there is a variation of the female steriod hormones estrogen and progestogen. These hormones has mainly reproduktive functions, but do also affect other physiological systems, which may have an influence on athletic performance. The use of oral contraceptives among female athletes matches the use among the general population. There is a concern among female athletes and there coaches weather oral contraceptives can affect the performance. The purpose of this litterature review is to determine the effect of the menstrual cycle and the use of oral contraceptives on athletic performance.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.