3D-modelling in AutoCAD This thesis is done in cooperation with LB-Hus in Bromölla, and have aimed to establish a digital AutoCAD model of one of the company?s house types and to find out what opportunities there are to do visualisations in the form of images directly from the programme. Modeling has been carried out so that the very construction of the house is included. Interiors and installations, with the exception of the ventilation system, have been left out in the model. The model has been created with solid models after a comparative study made between solid models and surface models to find out which option in this case was the easiest to handle and took up the least space.

This thesis compares four relevance feedback methods. The Rocchio and Ide dec-hi algorithms for the vector space model and the binary independence model and Okapi BM25 within the probabilistic framework. This is done in a custom-made Information Retrieval system utilizing a collection containing 131 896 LA-Times articles which is part of the TREC ad-hoc collection. The methods are compared on two grounds, using only the relevance information from the 20 highest ranked documents from an initial search and also by using all available relevance information. Although a significant effect of choice of method could be found on the first ground, post-hoc analysis could not determine any statistically significant differences between the methods where Rocchio, Ide dec-hi and Okapi BM25 performed equivalent.

The report aims to describe the austenitic stainless steel Sanicro 25 from a thermomechanical point of view. The thermal and mechanical properties of the material make it suitable for use in coal ? and thermal power plants. By the use of Sanicro 25 it would be possible to bring the efficiency of these plants up while bringing the carbon emissions down.A material model is created from material testing and validated through simulation in the finite element software Abaqus. The model that has been derived describes the material behavior during loading and stress relaxation for the first cycle in a thermomechanical fatigue test well.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

The activities of beavers in forested landscapes affect both ecological and economical values. The creation of the dynamic wetland mosaic associated to beaver activities can even improve the quality of water and have been documented as an important landscape engineer affecting the environment for many species. The local office of Sveaskog in Skinnskatteberg is responsible for the management of large areas of the forests in the County of Västmanland. In this area one of several company?s goals are to create ten new wetlands in their own forests as a part of cooperation with the Swedish bird society and Swedish wetland association.

It is essential to reuse- and recycles residues to decrease the amount of deposit materials and reach sustainable energy use. Two ways to work towards this is to recycle wood ashes to the forest as nutrient compensation and extract biogas from combustion of biomass.The aim with this study was to decide whether wood ashes that been used for biogas upgrading with accelerated carbonation also can be used as a nutrient compensation in the woods according to recommendations from the Swedish Forest Agency (Skogsstyrelsen).The ashes that were used in this study came from Johan Andersson who works at JTI in Uppsala, who also treated the ashes with biogas. The ashes have, in both untreated and treated condition, been analyzed in this study according to contents of elements, leaching properties, hardening properties and contents of crystalline phases, to evaluate what impact carbonation with biogas has on the ashes.The accelerated carbonation led to hardening of the ash, and decreased amount of CaO- and increased amount of CaCO3. The CO2-uptake also entails a dilution of the elements, and the content of nutrients and trace elements decreases. However the results show an indication of an uptake of S from the biogas to the ash, since the dilution had a smaller impact on S than the rest of the elements.

This Masters thesis concerns epistemology in Knowledge Organization KO, as a field of study in Library and Information Science LIS. Using a theoretical model by Birger Hjørland and foucauldian discourse analysis as springboards, this study analyses three epistemological discourses in the practice of KO. The aim of the study is to show how these discourses are constituted and demarcated in relation to KO, as well as to examine how they fit into Hjørlands model. A brief historical outline of some epistemological trends in LIS is sketched, as well as examples of how different epistemological schools influence different parts of KO, e.g. information retrieval, indexing- and classification theory.

Simulation is a vital tool during development of JAS 39 Gripen, since money and time can be saved.The Auxiliary and Emergency Power System, AEPS, is a subsystem of the secondary power system in Gripen. It has the function of providing the aircraft with electrical and hydraulical power before activation and after deactivation of the main engine. The system also functions as backup in case of a safety critical problem in the main power supply system. The system basically consists of a control unit and an auxiliary gearbox. The gearbox is driven by an air turbine.

This study examines if the prediction of cardiovascular disease in hypertensive patients can be improved upon when renal function and microalbuminuria are added to the classical risk factors The predictive capability of a model is measured by discrimination, calibration, reclassification and Harrell's C.The results are ambigious. In most cases, microalbuminuria should be included in the model, but the results regarding the other measures of renal function are varied. Therefore, the selection of risk factors to include in the model depends on which measure of prediction one prioritizes..

On a highly competitive market, quality is an important aspect to take into account, both in terms of goods and services. The Swedish timber market is very competitive and to achieve long-term success focus on the customer, in this case private forest owners, is a prerequisite. SCA Skog AB Jämtlands forest management administration is dependent on the acquisition of timber from private forest owners to fulfil their mission to the supply of SCA's paper and sawmills in Sweden with raw material. To be able to develop the cooperation with private forest owners, the administration investigates their quality management by measuring the customer satisfaction index (CSI). The purpose of the study was to identify a practical and systematic method to handle deviations and suggestions for improvements to achieve a higher customer satisfaction.

Through a quantitative examination, 26 pedagogies in the pre-school activity answered a few questions in an enquiry about outdoor education. The purpose with this examination was to find out what pedagogies think and apprehend about outdoor education, and also if the "education plan" is in their minds during outdoor activities and if they see them self´s as competent in nature studies. They have also answered questions whether they think that they have good outdoor environment that stimulates children´s development and learning and if there´s any forest that they visit on regular basis.The pedagogies think that during time spent outdoor, it´s the motor skills that are best developed. All of the pedagogies mentioned above think that they need to get more educated in nature studies and also that pedagogies attitude towards time spent outdoors affect the children. They do not think about the goals and intentions of the "educations plan" all the time.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Landskapsvårdens hantverk, 15 hp [2015].

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

During the 20th century a significant proportion (about 15 %) of the peat-covered wetlands in Sweden were drained to improve forest productivity. Area wise, most of the forest drainage was done in northern Sweden, but relatively speaking a larger part of the wetlands have been drained in the southern parts of the country. Most often, the forest drainage resulted in increased forest growth, but failures were not unusual, and harmful effects, e.g. on species richness, have been a common cause for draining. Ditch cleaning is necessary for maintaining the ditches in good condition.