The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This report discusses questions concerning wear on forest roads. The purpose of the work is to investigate if the wear on the roads will decrease when the speed limit gets lower for the trucks that transport the wood. A normal forest road, class B, was used in the study. In total 5000 m3f timber was transported on the road. Data about the road was measured with a profilograph car before and after the timber transport.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

The purpose of this study was to examine how teachers act when it comes to play with constructions in preschool. The purpose was also to find out what kind of material the children have to work with and what they do with the things that the children made. The study was based on qualitative semi-structured interviews. Semi-structured interviews was choosen  to get out as much information as possible, with open questions in a semi-structured interview you can get the information that is relevant for the study. The results show that there are different kind of material available in preschool, but knowledge of the subject is missing and demanded by teachers. The material are pretty similar, some of the teachers use material from the forest while others don?t.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose with this study is to find out how much dead wood we can expect us to find in a Russian reference river and compare with studies from Swedish streams. Dead wood are an important structure for the biodiversity in forest streams, studies have shown that population of trout can increase with up to 300 % when the amount of dead wood are increasing from 0 to 8 ? 16 LWD (Large woody debris)/100 m2. Dead wood are also an important structure for the stream character, formations of dams and pools which are important habitats and reproduction areas for salmon and brown trout. The study where taken place in tributaries to the Russian river Varzuga in the North West part of Russia outside Murmansk. Varzuga has low impact of human activity and is considered to be a reference river to rivers in northern Sweden.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

This thesis has been conducted at Saab Bofors Dynamics AB. The purpose was to investigate if a non-linear missile model could be stabilized when the optimal control signal is computed considering constraints on the control input. This is particularly interesting because the missile is controlled with rudders that have physical bounds. This strategy is called Model Predictive Control. Simulations are conducted to compare this strategy with others; firstly simulations with step responses and secondly simulations when the missile is supposed to hit a moving target.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

Communication, information and marketing are three of the main prerequisites for companies that want to increase their turnover. The everyday work for a Forest Manager within the forest owners? association Mellanskog consists to a large part of interpersonal communication, either by close vicinity contact or by phone calls. Interpersonal communication is time consuming and resource intensive. If the flow of information, communication and marketing does not function well then there is a lack of a base for development.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.