Sökresultat:
11955 Uppsatser om Viable System Model - Sida 56 av 797
Utveckling av ledningsmodell : Utredning av en sektions framtida ledning och styrning på Saab AB
As a consequence of the exports of Saab AB?s airplane 39 Gripen the departmentFATPA has grown and developed substantially in a short period of time. With the aim toclearly define and describe the establishment and its new work procedures and routines,which are meant to be applied after the turn of the year 2005/2006, FATPA is aiming todevelop a management model which will contain the above. The purpose of themanagement model is to describe how the department FATPA wants to work, especiallywith consideration to the department?s management.
Analys och kvantifiering av energieffektivisering inom fjärrvärmesektorn
The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.
Miniräknarmania : eller hur att få ut så mycket som möjligt från en enkel reklamräknare
This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..
Planering : fallstudie av en mjölkgård
The purpose of this paper is to give examples of different ways of economic planning and
calculation within agriculcture. My aim is to use a couple of them as an explanation of a case
from reality. My choice went to budgetsimulation and balanced scorecard since those are best
suited in this specific case.
In the information retrieval I present different instruments of economic planning like theory of
cost, budget and productcalculation. The budgetsimulation describes how to use the different
methods in a long term economic planning. The balanced scorecard is also a model of longand
short-term planning but besides the economy planning it?s also a reminder of your
personal goals.
In the model I have used a dairyfarm as a case.
Centraliserad personalavdelning- bästa verktyget för chefsstöd? : En kvalitativ studie om arbetssituationen relaterat till chefsstödet från personalavdelningen vid Uppsala kommun.
Changes in the workplace have led to new ways of organizing and structuring organizations. Organizations? desire to increase competitiveness, efficiency and flexibility has resulted in new conditions in the field of human resources. The new conditions have also created new roles and changing responsibilities for those working within human resources.The purpose of this study was to investigate how the implementation of Ulrich's model for HR transformation can impact on the human resource departments managerial support to first-line managers in the municipality of Uppsala. Today the municipality of Uppsala organizes its human resources based on the Ulrich's model, which divides the work into the units service center, the expert unit and business partners.
Teknisk analys : Är det lönsamt att vara trendig?
Trading based on technical analysis has its roots in the U.S. financial industry where it has long been common practice, in Sweden however the trading style has not had the same impact. Based on the results from the preliminary study we believe this is about to change and that the topic therefore requires further studying. Several online stockbrokers today provide information and tools for technical analysis to their clients. As the list of indicators to use for creating strategies is so immense it is interesting for an investor to know what actually could be the basis for a profitable investment strategy.
3D-byggnadsmodeller utifrån takkonstruktioner : Lagring, hantering och bearbetning
A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.
Bonussystem -Sett ur anställdas perspektiv-
Background: Different forms of reward systems have been more common in Sweden and are used in purpose to motivate employees to work in accordance with a company?s goals. By creating work motivation among the employees, a more congruent situation can appear between them and the managers, and the company can perform better results. Purpose: The purpose with this thesis is to study and analyse a reward system from the employees perspective, regarding it?s affect on work motivation.
En simuleringsmiljö för distribuerad navigering
This master thesis studies distributed navigation which isa function implemented in a future network based combat information system to improve the accuracy in navigation for combat vehicles in a mechanized battalion, above all in the event of loss of GPS. In the event of loss of the GPS the vehicles obtain dead reckoning performance through the backup system that consists of an odometer and a magnetic compass. Dead reckoning means a drift in the position that makes the accuracy in the navigation worse. The distributed navigation function uses position and navigation data with measurements between the vehicles to estimate the errors and uncertainties in positions, which are used to improve the accuracy in position for the vehicles. To investigate and demonstrate distributed navigation, a simulation environment has been produced in Matlab.
Simulering av COD-fraktioner i en aktivslamanläggning vid en sulfatmassafabrik
This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.
Metallersättning inom byggbranschen
In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.
Datorsystem för kvalitetskontroll och temperaturövervakning med värmekamerateknik
The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .
Analys av skillnader mellan internationell och svensk rapportering av inträffade händelser på kärnkraftverk
Report of diploma work conducted at the Swedish Radiation Safety Authority (SSM) as part of the bachelors program in Nuclear Engineering at Uppsala University.All nuclear power plants in Sweden are obliged to report any deficiency in their barriers or the defense in depth in obedience to SSM?s regulations concerning safety in nuclear facilities. In addition, there is an international system for reporting such events. The purpose of this thesis is to study the Swedish report system and to analyze the differences between Swedish and international event reporting.In the Swedish system, SSM?s regulations are effectuated by means of event reports classified as category 1-3, designed individually at each Swedish facility.
Skönlitteratur på skärm: En explorativ undersökning om e-boken och dess konsekvenser för litteratursamhället
This thesis should be regarded as an integrated research synthesis. The purpose has been to analyse how the literary sociologist Lars Furulands model the literary process correlates in relation to todays book market for fiction. The central problem has been: In what different ways can some of the main actors featuring in Furulands model of the literary process use, produce or provide copyright protected works of fiction which are electronically distributed? Three questions have been considered to penetrate this problem: In what different ways can to judge from some projects which have been carried through at common public libraries electronic works of fiction be provided to their presumed readers? What reasons could there be as it appears in a number of texts that four Swedish authors have chosen to disseminate their works of fiction by the aid of the Internet? Which main functions may, according to current research, be supported by electronic media in connection with editing and retail of fiction? During this study a picture of two quite disconnected processes of publication has materialized. These processes seem to proceed parallelly to each other, without any close contact, in a traditional respectively an electronic circuit.
Fibonacci och hans matematik : En titt på Fibonaccis matematiska liv och det han lämnat efter sig
This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..