A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

In this essay we strive to examine how the social work in Sweden will be affected if the Swedish welfare model goes through fundamental changes. The study illuminates the close connection between the Swedish collective bargaining model and the Swedish welfare system. The questions we present in this essay, and hopefully answer satisfactory, are: is the Swedish welfare model subject to thorough changes? How will such a change alter the social work in Sweden?, is the Swedish collective bargaining model in a state of modification? Would a modification in the collective bargaining model have effects on the Swedish welfare model?We have used a qualitative method in collecting empirical material. We interviewed three representatives, who worked for Confederation of Swedish Enterprise, IF Metall and The Swedish Municipal Workers respectively.

Rimaster Kisa AB is a member of the Rimaster Group, the corporation was bought from Samhall AB in January 2007. The corporation is producing mechanichs needed by the Rimaster group as well for external costumers. Samhall AB is now functioning as a provider of labor for Rimaster Kisa, as the company is hiring personnel from Samhall AB. The company has earlier have had problems with their lead times being far too long. This has resulted in that the management decided to invest in a new edging press.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

The purpose of this Master?s thesis is to examine how the gender system is described in chick lit. The analysis is based upon seven chick lit novels. The primary theoretical point of departure is Yvonne Hirdman?s theory about the gender system, the hierarchical order and the separation of the sexes.

The Annexin-V/propidium iodide (AV/PI) assay detects early membrane changes in spermatozoa and viability using flow cytometry. It is an objective method that evaluates a much larger number of single spermatozoa compared with the usual estimation of motility, the most commonly used method for routine sperm evaluation. In the present study four ejaculates from four stallions were used in a split-sample design to investigate whether and how the number of intact spermatozoa is affected over time and after incubation at different temperatures, either those recorded during shipment of stallion semen for AI (9 or 5°C) or room temperature (20°C). The Annexin-V results did not reflect the motility results that were monitored in parallel. While motility decreased over time, the number of spermatozoa with intact membranes (viable) remained unchanged for at least 21 hours following a short period of initial instability.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.

Historically transformers with system earth equipment have been modeled as open circuits in zero sequence. This approximation has been satisfying, but lately it has been discovered that equipment on one side of the transformer have responded to faults that occurred at the other side. Most of these problems took place when the majority of the system on the secondary side of the transformer contained cables. These findings have led to questioning whether or not the former model of the transformer in zero sequence is correct. This report investigates if it is necessary to represent the transformer in zero sequence in another way than it is usually done today.

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.