Asset management in insurance companies differs from conventional asset management to the extent that respect has to be taken to both assets and the commitments the insurance company has towards its customers. A model that has proven to fit well regarding the matching of assets and liabilities is the Asset Liability Management Model (ALM model). In addition to the matching in the balance sheet, the ALM model can be used in a company's work with strategic portfolio allocation by applying it as a basis for analyzing investment strategies with expected risk and return. From this, the ALM model also becomes relevant for calculating key figures according to the legal framework Solvens II which includes laws and regulations regarding the demands on economical strength (solvens) of insurance companies.Hence, the goal of this masters thesis has been to, on behalf of Bliwa Livförsäkring, create an ALM model to support the asset management department of Bliwa in their work with defining a credible way of analyzing the future risk and return of Bliwa's asset portfolio and insurance undertakings.The ALM model generally consist of four submodels, the scenario model, the liability model, the asset model and the company model, where the scenario model often is named as the core of the ALM model. The course of action has been to develop these submodels individually, with focus on the scenario model.

The study evaluated the Mutant Prevention Concentration (MPC) of Pradofloxacin on three Escherichia coli (E.coli) strains, 2 wildtypes and one first-step gyrA resistant mutant. We also measured the value of AUC (Under the Concentration)/MPC that prevents growth of resistant mutants. It is of importance to reach a concentration above MPC that prevent E.coli from developing resistance against the antibiotic.We used an in vitro kinetic model where we added bacteria? and antibiotic. The culture flask was attached to a pump with an adjustable pump-speed.

The SAB-system (Klassifikationssystem för svenska bibliotek) was created almost a hundred years ago and has often been viewed as insufficient among many academic libraries. KB (Kungliga Biblioteket) has therefore decided to change to DDC (Dewey Decimal Classification) which means that the Swedish libraries are now facing a challenge that involves a change to a new classification system. This is a comparable situation that occured when the SAB-system was created. The aim of this Master?s thesis is to examine the Swedish library sector´s approach to a new classification system, first to the SAB-system and then to DDC.

I have chosen an action research approach for this essay. I want to incorporate a method of conflict management in the work of the personnel at a school and also discuss their thoughts and experience in conflict management. I wanted to incorporate modern knowledge about constructive conflict management for everyday use and I stress that if we can evolve these skills among the personnel in schools then we have a better chance of helping children with deviant behavior which often end up in conflict because of it. This will also help all the other children and personnel to manage conflict situations in a better way. I want to introduce a new way of thinking about conflict management which in many ways is different from how it is today. Briefly the method which I advocate revolves around paying attention to every ones basic needs and says that everyone can win and no one has to loose. he main purpose of this essay has been to find out if focus group conversations is a viable method for improving conflict management in the school system. Several of the participants has in their evaluations written that it was a rewarding and interesting way to work.

Global warming is going to affect our society in many ways. One can say that the problem we face has two different sides. One of those sides has received a lot of attention, namely how we can reduce our emissions of greenhouse gases. However, because of the climate system's inertia the climate will continue to evolve over a period, no matter how much we will cut back on emissions. Because of this, we have to start adapting our society to the climate changes that we cannot influence.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Uppsalahem AB is a municipally owned real estate concern that owns and administrates housing for nearly 30 000 people. The company puts a lot of effort into reducing the energy use of their housing stock. This project is a master?s thesis in the energy systems programme at Uppsala University, carried out in collaboration with Uppsalahem. The aim of this thesis is to provide energy saving measures for fourteen student housing buildings in Uppsala, Sweden.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Outages in the electric grid can be costly for society. Because of this, reliability is one of the parameters used to regulate network companies. Reliability in electrical grids can be measured with SAIDI, system average interruption duration index, which for Fortum Distribution has increased in Stockholm?s distribution network (11 kV) in the early 2000?s.By using outage data for Stockholm from 2011-2013, sets of parameters to be used for reliability calculations in the network information program Tekla NIS were derived. Two different options for investment were then analysed: changing old cables with high fault frequencies, and installing automatic switching in distribution substations.

This paper aim to present a model for evaluating what we choose to call HTML-frameworks, a framework that contains a set of CSS layouts and occasionally JavaScript support, based on the characteristics of the software quality standard ISO/IEC 9126-1. The methods used to produce this model is based on a field study that involved making a web portal with the help of a HTML-framework, some relevant literature and an analysis of the framework based on the characteristics of the ISO/IEC 9126-1 standard. The result was a model based on twelve different characteristics; functionality, web browser compatibility, collaborative skills, user-friendliness, documentation, visuals, graphic layout, performance, activity, professional support, replaceability and license. This model should be viewed upon as a suggestion to what a model for choosing HTML-framework could look like, because we haven?t had the time to test it in a real situation, so further studies are needed, and we believe there could be improvements made in the objectivity of the assessments of the characteristics..

The United Nations has, during many years, developed a model for a globally harmonized system for classification and labeling of chemicals, with the aim of it becoming a global standard. This system is implemented in the European Union through the CLP-regulation and is now working parallel to the existing directives until 1st of June 2015, when all the new classifications of substances and mixtures must be completed. The aim of this project was to adjust the laboratory to the new legislation, through inventory of stored chemicals, update the list of chemicals and perform self-classifications of mixtures. The work included handling of about 650 different chemicals with varying hazard classifications and search for information in corporate websites and chemical databases. This resulted in a new and complete list of chemicals stored and used in the laboratory and, in addition, an example of how to make a self classification of a mixture.

The purpose of this essay is to examine Banverket?s problems with its current financial model as it relates to reporting on operations and maintenance work, and to propose measures to simplify the model..

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.

This report describes the building of a computer model that makes it possible to simulate the thermal climate in a greenhouse. The computer model is built on the physical theory of heat exchange that occur in a greenhouse, such as radiation and convective heat exchange. The model also includes the heat storage that is active in a greenhouse.The computer model is used to simulate the thermal climate in a greenhouse under three periods, winter, spring and summer. It also investigates which effect a concrete wall has on the thermal climate in a greenhouse. The purpose of putting a concrete wall in the greenhouse model is to investigate the possibility to store heat during the day and then use this heat when the temperature drops during the night.The result from the simulations shows that a concrete wall levels the big difference in temperature that normally occurs under a day in a greenhouse.