Syftet med denna studie var att beskriva den upplevda aktivitetsbalansen hos heltidsanställda officerare i marinen inom den svenska Försvarsmakten. Åtta heltidsarbetande officerare, som högst uppnått graden kapten samt hade hemmaboende barn intervjuades utifrån en semistrukturerad intervjuguide. Materialet analyserades med kvalitativ innehållsanalys och det resulterade i två domäner ?till sjöss? och ?i land? som sedan delades upp i fem kategorier; ?Obalans under perioderna till sjöss?, ?Intensiva perioder till sjöss kräver återhämtning?, ?Arbetet till sjöss påverkar familjens aktivitetsbalans?, ?Arbetet stannar på arbetet? och ?Stor mängd kvalitetstid i land kan väga upp obalansen till sjöss?. Officerarna beskrev sin vardag som uppdelade i två, till sjöss och i land.

BT is a global company within the lift truck industry. The main office is located in Mjölby. In Europe all sales and service activities are carried out by fully owned sales companies. I North America, BT RAYMOND develop and distribute trucks under a different brand. For the rest of the world BT works together with a distributor network, most of them are fully independent others BT has a small ownership in.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

Thesis purpose The study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. Methodology The effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database. Theoretical perspective The study is derived from Kapferers (2004) definition of brand equity, where he is dividing the concept into three parts. This study is focused on Brand strength in particular, which is one of the parameters in the above-mentioned theory.

As emission legislations across the world continuously pushes engine development forward,engineers constantly need to come up with and implement fuel saving technologies. During thelast decade, variable cam phasing has become a popular solution to increase gas exchangeefficiency. This configuration is typically mechanically constrained by camshaft limitations, anda solution to circumvent this problem would be to use a different valve actuation principle.One example of this is to use pressurized air controlled by electrical solenoids. Such a systemhas been developed byCargine Engineering and this provides the starting point for this work. Tobe able to operate the valvetrain on an actual engine, a control system is needed.

Städerna växer och samtidigt ökar efterfrågan på närodlade och ekologiska grödor. För att klara av att producera närodlat och mer hållbart skulle ett alternativ vara att odla i så kallade vertikala växthus. I Kiruna finns Sveriges största malmgruva som drivs av företaget LKAB vars olika processer leder till spillvärme. I Kiruna är klimatet kallt jämfört med större delen av Sverige och därför erfordras uppvärmning om odling ska kunna ske året runt i ett växthus. Examensarbetets uppgift är därför att undersöka hur man kan utnyttja spillvärme till ett vertikalt växthus i samband med en ny kontorsbyggnad på LKABs gruvområde.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

Thesis purposeThe study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. MethodologyThe effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database.

The essay deals with the hill-fort on the mountain Halleberg, Sweden, its wall design, functionality, dating and its possible function as a central location and a place of worship of the ancestors.The Halleberg hill-fort consists of a 1500 meters long at times cohesive stonewalls which together blocked the mountain from its surroundings. Hallberg's natural vertical scree and cliffs along with the masonry blocked the whole mountain from the surroundings.The hill-forts, with few exceptions are largely not investigated archaeologically and its functionality and role in the ancient society is based on outdated research on the subject. The current archaeological interpretation is that hill-forts served as temporary defense in times of unrest or served as center of power for a social elite. The prevailing view in the archaeological sphere is that the hill-forts had a variety of functions and that its functionality and role in ancient society has varied.Halleberg´s strongest wall sections are at the mountain's south-eastern part where the natural driveway, Storgårdsklev is located. Along with the massive masonry of the walls in Bokedalen Storgårdsklev functioned as the hill-forts main entrance.

The purpose of this study is to survey and evaluate if the individual contrast sensitivity and preferences for horizontal and vertical lighting level correspond to the values that standard SS-EN 12464-1 recommends for the workplace- and surrounding light levels.This study examines if lighting should be adapted after the individuals? need or if a general value can be found that will cover every individuals? need for a workplace and surrounding light level. This study also examines if parameters like sex, age and/or glasses/lenses have an effect on the amount of lighting that the test subjects need. Lastly we compared the values concerning the relationship between workplace- and surrounding light levels with standard SS-EN 12464-1?s recommendations.The study is carried out with an experimental design that surveys 220 test subjects who were chosen by a selection of convenience.

Syftet med denna uppsats är att berika den befintliga teorin om verksamhetsstyrning inom offentlig sektor med fokusering på överensstämmelsen mellan mål och resurser i den offentliga hierarkin. Undersökningen är av en fallstudiekaraktär där forskningsprocessen bestått av ett antal personintervjuer. Dessutom har vi samlat in en del sekundär data som var nödvändig för att slutföra studien. Vi har valt att utgå från teorier som behandlarverksamhetsstyrning med tillhörande komponenter Empirin består av insamlat material från intervjuer som ägde rum på Malmö Stadskontor, två stadsförvaltningar samt två grundskolor i respektive stadsförvaltning inom Malmö Stad. Våra slutsatser påpekar att det finns klara avvikelser mellan mål och resurser inom de studerade enheterna.

The automotive industry is a highly competitive market characterised by low profit margins or huge losses. Cost reductions have been of top priority for all OEM?s (Original Equipment Manufacturer) and will continue to be so for many years to come. Beside cost reductions, reducing the time-to-market is of greatest importance to stay in the competition. OEM?s that are slow to market with products that neither matches customer expectations nor the products of their competitors, will soon loose market shares and see their economical performance falter.

This thesis is a part of the DySCAS (Dynamically Self-Configuring Automotive System)project which has the overall purpose of creating a middleware for the electronics in an automotive environment. The thesis has been made with collaboration with ENEA AB who is a member of the DySCAS project. ENEA AB has developed a demonstration platform to test the fundamental ideas which the DySCAS project is built on.The purpose of this thesis was to design and implement a GPS application to be added to the demonstration platform. This was done by adding a GPS receiver to the original DySCAS demonstration platform and designing and implementing an application to be able to extract the information from it. The resulting application is able to present cur- rent position and absolute time to the DySCAS networks as services to be used by other applications or by the network it self.