The work was carried out on Termisk Systemteknisk?s office in Linköping. The aim was to create a computer system with infrared camera technology for quality control and temperature monitoring of manufacturing processes in industry. The system should be configurable such that it can be used on several different issues, including those where the real-time analysis of camera images is required.The developed system is based on an existing framework, Panola, to deal with measurement results and images in a database. The framework is built for the system continually check for new data , and the task was to create a foundation upon which to build systems that use the framework, but fully or partially utilize direct calls .

The purpose of this thesis is to discuss how an instrument originally developed for measuring changes toward lean thinking inservice organizations in general should be adjusted in order to be of use in service organizations within the healthcare sector, andin hospital organizations in specific. The adjustments are suggested based on difficulties specifically arising when implementinglean within the healthcare sector.Thesis starting point is a pre-existing lean assessment instrument developed for service organizations in general. The thesis appliesa qualitative method and integrates literature from the health care sector and lean production movement with the expertise of tenacademics and practitioners in order to find difficulties associated with the implementation of lean within the healthcare sector.These difficulties then lie as the substratum for the adjustments suggested to be made on the instrument.The thesis finds that lean, as a philosophy, does not differ between service organizations in general and service organizationswithin healthcare settings. However, due to deficits in the general understanding of lean some adaptions on the instrument mustbe made. First, some words associated with production must be changed to words associated with healthcare.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

The state of our society is frequently changing. Due to various factors, the pressure of creating a changeable city is high and necessary to adequately supply the needs for its inhabitants. But making these changes and adapt to the fast shifting state of the city is not always physical possible. Young adults and students is a group that often seeks to move to intensely growing city regions. The reason for this is a more promising job market and more attractive educations, but coincidentally the shortage of housing is extremely high in these areas.

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

The purpose of this Master Thesis is to analyze what suitable hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

This is an essay concerning the density of the city. An increasing amount of today?s cities have a shortage of space available for the erection of new buildings and settlements, especially in areas close to the city-centre. New buildings and settlements are therefore often found in the outskirts of the city, resulting in long distances between work and living for many people. These long distances are a waste of limited resources and are inconsistent with the vision of the sustainable city.The challenge for the future is to insert new buildings and settlements in the existing city-structure and in this way reduce the distances between different city-functions.The density of the city can be increased in two different ways; by inserting new buildings between existing ones or by extension existing buildings, for example by an additional floor.

Syftet med detta arbete är att simulera ett värmesystem i COMSOL Multiphysics, Pipe Flow Module, Non-Isothermal Pipe Flow som innehåller ekvationer och randvillkor för att modellera inkompressibel strömning och värmeöverföring i rör.Data om processen och dess komponenter har samlats in från industrin där arbetet är utfört och i vissa fall modifierats för att bättre beskrivas i programmet.Utifrån insamlad data har en modell byggts upp och två simuleringar har gjorts. En stationär för starten av systemet, den har sedan legat till grund för en dynamisk som simulerar förloppet från start till normaldrift.Tiden det tar för det aktuella fallet att nå drifttemperatur är 16 timmar. En felströmning upptäcktes samt att en av pumparna inte kommer att klara en start från 20 °C..

The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance.The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made. The result of this project is a constructed DMM board.

The aim of the thesis is to present a study of what works well and what does not work so well in today?s use of computers in primary care with a special focus on the use of computers in the management of referrals for consultation. In May 2009 a module for electronic consultation referrals was introduced in the computer system Cosmic at the University Hospital in Uppsala. Previously, the primary care units had to use two different systems for management of referrals. Referrals sent internally within primary care have been sent electronically while referrals to the University Hospital or other external units were sent on paper.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

France is committed to its ambition to lift the European Union's arms embargo imposed on China after the Tiananmen Square Massacre in 1989. France is of today the only member state that is acting to lift the arms embargo, evoking questions of motives behind its behavior. The underlying assumption in this essay is that France's actions reflect a need to find new ways of adapting itself and surviving faced with the threats of its decreased international influence. By using three different perspectives ? realism, liberalism and constructivism ? this essay examines three possible models of analysis to explain France's behavior.An analysis of the discourse covering this essay´s topic between 1989-2007 provided the basis of the paper.

Wind power in Sweden is expanding in response to the government's decision that 49% of Sweden's power should originate from renewable energy sources by the year 2020. Problems with noise and sound emissions related to wind turbines are a constant argument against the wind power expansion and this paper means to examine if vertical axis wind turbines might be a viable alternative to the conventional horizontal design for noise sensitive areas. In order to determine factors like difference in frequency, noise propagation and noise emission level, measurements of both horizontal and vertical axis wind turbines have been completed and the data analyzed with MATLAB. It is shown that there is a difference in how the noise from the two types of turbines propagates due to avariation in the frequency spectra of the emitted sound. It is also shown that vertical axis wind turbines generate a lower sound emission with less intensity inthe lower frequencies..