The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical Verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Tractors of today come equipped with a CAN-system. A CAN-system sends information from sensors to electronic control units who process the signals. The sensors measure several interesting parameters such as force, pressure and speed for various components of the tractor. This thesis discuss a force sensor which is placed in the pivot of the tractors three point linkage, the sensor measure the horizontal reaction force from the load that the tractor is exposed to. Signals from this sensor can be used to measure the force from any implement that the tractor is exposed to during an operation.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

In order to facilitate testing of anesthesia machines a patient simulator has been required by Maquet Critical Care AB. A patient simulator has been developed to reduce expensive and time consuming animal experiments and temporary lab arrangements. The patient simulator has been developed and designed to simulate human lungs with regards to anesthetic uptake, production of carbon dioxide and heating and moisturizing exhaled air.The system comprises a container and a test lung to simulate the volume and the dynamic of the human lung. The simulation of uptake of anesthetics has been implemented by pumping a fraction of the gas from the container through a bypass circuit with an active charcoal filter that adsorbs volatile anesthetics. The flow through the bypass circuit is generated by a pump and is controlled by a linear valve.The resulting performance of the patient simulator has fulfilled the requirements.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

Den journalistiska professionen har genom historien varit ett högaktat yrke som tillknutits stort förtroende från allmänheten. Förtroendet har baserats på en exklusiv tillgång till nyhetskällor samt journalisternas vilja att leva upp till de klassiska journalistiska idealen. I dagens medieklimat har dock allmänheten större möjlighet att själva ställa krav på journalisterna, i frågor om publiceringshastighet och medieinnehåll. Detta leder också till att arbetet med källhantering förändras.Studiens teoretiska underlag är baserat på teorier kring det amerikanska medieklimatet. Teorierna slår här fast att dagens medieklimat problematiserar utövandet av korrekt källverifiering.

Den journalistiska professionen har genom historien varit ett högaktat yrke som tillknutits stort förtroende från allmänheten. Förtroendet har baserats på en exklusiv tillgång till nyhetskällor samt journalisternas vilja att leva upp till de klassiska journalistiska idealen. I dagens medieklimat har dock allmänheten större möjlighet att själva ställa krav på journalisterna, i frågor om publiceringshastighet och medieinnehåll. Detta leder också till att arbetet med källhantering förändras.Studiens teoretiska underlag är baserat på teorier kring det amerikanska medieklimatet. Teorierna slår här fast att dagens medieklimat problematiserar utövandet av korrekt källverifiering.

Today?s climate changes will probably give rise to precipitation in Sweden, which will cause more floods in Swedish rivers. Many of the Swedish rivers are regulated and have lots of hydro-electro power plants. Higher floods in the rivers will give greater water loads on the dams, which mean that a higher discharge through the sluice gates and in the spillway channels is needed. High discharge of water in a spillway channel can create scour of the material in the channel.

Den journalistiska professionen har genom historien varit ett högaktat yrke som tillknutits stort förtroende från allmänheten. Förtroendet har baserats på en exklusiv tillgång till nyhetskällor samt journalisternas vilja att leva upp till de klassiska journalistiska idealen. I dagens medieklimat har dock allmänheten större möjlighet att själva ställa krav på journalisterna, i frågor om publiceringshastighet och medieinnehåll. Detta leder också till att arbetet med källhantering förändras.Studiens teoretiska underlag är baserat på teorier kring det amerikanska medieklimatet. Teorierna slår här fast att dagens medieklimat problematiserar utövandet av korrekt källverifiering.