The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing Vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

This thesis has been written at Linköping University for the company Instrument Control Sweden AB (ICS).ICS is a small company located in Linköping that develops software and hardware for Unmanned Aerial Vehicles, UAV. At present, ICS has a fully functional autopilot called EasyPilot but they want to reduce the autopilot?s size to make it more attractive.The purpose of this thesis was to investigate if it was possible to reduce the size of the autopilot and how, in that case, it would be done. It was also necessary to examine whether the old processors should be replaced by new ones and how hard it would be to convert the old software to these new processors.To succeed with the goals many of the old components had to be changed for new, smaller ones. Some less necessary parts were also completely removed.

The remotely operated underwater Vehicles that the client develops have needs of different kinds of data channels. In order to minimize the need of physical cable between the control unit and a ROV, a multiplex protocol has been developed. The protocol has been designed with the aim of using the bandwidth of the transferring link as efficient as possible.The different kinds of data channels used during this thesis project is; RS232, RS485 and CAN. ROM and FIFO-memories have been used to be able to effectively manage the different data channels. All the reading and sending of these channels have been implemented in FPGA-technology, the coding is made generic so that it will be easier to add more channels to the system in the future.The multiplex protocol is a modified version of the method STDM and it is a proprietary protocol.

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

Automated Guided Vehicles, AGV:er, används i huvudsak som monteringsplattform inom tung fordonsindustri. En AGV kan användas vid montering av motorer, växellådor och chas-sin. AGV:n transporterar produkten genom en slinga i fabriken, där produkten monteras. Idag säljs AGV:n med ett löfte om femfaldig säkerhet mot brott för alla de ingående komponenter-na. AGV:n är konstruerad för att bära upp en last på maximalt 1800 kg, med säkerhetsfaktorn inkluderad.

The United States use of Unmanned Combat Aerial Vehicles (UCAV) or drones for targeted killings of terrorists has been on the rise in recent years and the method has become the core element of president Obamas strategy in the war against terror. This study examines the deterrent effect of targeted killings on terrorism using UCAV/drones as a method of counterterrorism. Building on the literature on counterterrorism, UCAV, targeted killings, deterrence theory and statistics on terrorism the study provides a case study of the CIA drone operations in Pakistan between the years 2004-2010. The goal has been to analyze drone operations and the extent of terrorism from the beginning of the drone campaign until 2010. This as a means of identifying possible trends in terrorism activity due to the occurrence of drone strikes.

This thesis describes the developmentof a device called "Oil Separator"which is used for washing Vehicles andparticularly car washing. The devicedeveloped for Mr. Car Bilvård AB inUppsala, the company's work involvespassenger transport and courierservices. The company needs anexternal device that meets theenvironmental standards to wash theirown cars in the premises without theneed to modify or reconstruct on thepremises ground as the premises is ona leased contract.Work began with a preliminary study onthe literatures that describes boththe function and structure ofdesigning the device. A few interviewswith other car wash companies had beenimplemented, and some measurements.After collection of the necessaryinformation the specifications ofcustomer requirement was presented .With these requirements a fewconcepts was generated and weighedusing the Pugh matrix for conceptsselection for further development.The final concept was furtherdeveloped and a design has beenpresented.

This thesis investigates techniques for stealth hydroacoustic communication using spread spectrum. The Swedish naval defense organisations have a vision that all their units should be able to communicate with each other, even between underwater Vehicles. But the properties of water makes it a complex channel to use for wireless communications. Radiomagnetic waves have very limited range in water, therefore acoustic waves are used. In this report the basics of wireless communication systems are described including source coding, channel coding, modulation techniques as well as different techniques for spread spectrum.

A trend in modern landscape architecture is to design pedestrian streets so that Vehicles and people move in the same area. By doing this, traffic tends to slow down. On the market though, there is a lack of furniture that corresponds to the requirements of these kinds of public places. Therefore, I have designed this furniture, called VOX, which is planned to be used on streets, schoolyards and squares. One objective has been to promote the product to the industry.To achieve this, I have been in contact with people from different professions, which have all influenced my designprocess.

Examensarbetet som beskrivs i denna rapport är ett avslutande moment för en magisterexameni Teknisk Produkt- och Produktionsframtagning på Högskolan i Halmstad.Nilsson Special Vehicles i Laholm gav i uppdrag att förbättra slädsystemet i derasbegravningsbil baserad på Mercedes E-klass. Nuvarande system är föråldrat och harendast genomgått små förändringar sedan det utvecklades. Materialet, som är olikastålprodukter, gör att vikten är hög. Utformningen av systemet är från början utformat förett annat chassi än Mercedes vilket gör att det passar dåligt i denna bilmodell. Det ärframförallt lasthöjden som påverkas negativt.

The object for this study is a company developing and manufacturing Vehicles for heavy transportation. The company distributes their products on a global market. Therefore the company is required to have efficient internal production development processes in order to successfully beat the competition. The purpose of this master thesis is to study how this particular company intends to implement their standardized theoretical product development process within their organization and how well it is done. We intend to identify and specify if the process has any unexploited capacity.

In the automatic manual transmission system, Opticruise, the choice of gear is based on several parameters such as road incline, driving resistance and vehicle mass. Many different mass estimations are made during driving. A final vehicle mass is then used to determine the current gear. Construction Vehicles are often not equipped with air suspension and can therefore not estimate the vehicle mass when standing still. If that sort of vehicle is reloaded while standing still an incorrect mass estimation will be used and as an effect of that also a wrong gear.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.