Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

During our education to become lighting designers at Jönköping University, the artificial lighting has been in focus. Therefore we wanted to learn more about daylight. We chose to do this from a visual approach in open plan offices. Since daylight is part of the architects´ responsibility to master, we wanted to examine what architects think of when they plan daylight environments in open plan offices and how this is expressed in the buildings with focus on the visual factors.Our questions at issue are:What knowledge do architects have concerning daylight planning, and how do they use this knowledge in their practice?How well do the chosen daylight environments meet the end-users need of a good visual environment? The study consists of three case studies, carried out in the same way.

To be allowed to sell Z-suspended vehicles with dipped beam Xenon or LED lighting, Scania have to develop automatic headlight level control. This master?s thesis aims to be the foundation to that development.The thesis consists of several parts; a market analysis of how competitors to Scania and the general vehicle industry solve this problem; several available principles for detecting the amount of control needed; the construction of a test station for sensors, a control unit and components connected controlled by the control unit; a further theoretical and practical development of one principle ? one rotational sensor connected between the chassis and the back drive axis; a state flow model programmed in Simulink that produces the control signal for the headlight leveling from the sensor input.Lastly the thesis gives some recommendations to the further development and implementation of automatic headlight level control on Scania vehicles..

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

The purpose of this master thesis is to construct a steering transmission, for a trackedvehicle, containing two hydraulic circuits which are connected. The steeringtransmission should be mechanical to avoid steer-by-wire.BAE Systems Hägglunds has in an earlier study examined a system with two hydraulicpumps and one hydraulic motor, but the safety of the system wasn?t sufficient.To achieve sufficient redundancy there must be two hydraulic motors, which arecontrolled separately. When the two systems are connected in one point, this point is acritical part of the system because it directly affects both circuits. If one of the hydrauliccircuits fails the other should be able to operate independently as a steeringtransmission.

During the 1930´s the hot potato for the Swedish lighting associations were how to create the most suitable light for every situation, either for industries, offices or homes. The light bulb were the most frequently used source of light but due to limitied luminous intensity, big halls sometimes required up to hundreds of light bulbs to produce the right amount of light. Two kinds of different lights, by different reasons, can be titled the predecessors of the fluorescent lighting during the 1930´s: The volfram-filament tube light due to its estetic similarities and the electric discharge (mercury- and sodium-) lamps due to its technical resemblance. Even though they came in quite wide use (the volfram tube in public halls (e. g.

At the plant of Sandvik do Brasil in São Paulo there is a need for improving the transport of inserts between the plant building and the stock building. The idea is to install a system with an Automated Guided Vehicle (AGV) to take care of this transportation. The purpose of this report is to present which demands there are on the system and to find the best solution according to the demands.To conclude this work a study was made of the plant and the AGV technology was examined. Several providers of AGV solutions were contacted to get information about prices and detailed solutions.The conclusion was that the most suitable system for this application is a small unit load vehicle using inductive wire as guiding system..

Det här är en text som är ett resultat av vårt examensarbete vi genomfört under den sjätte och sista terminen på scenproduktionsutbildningen på Malmö högskola. Texten och examensarbetet utgår ifrån frågeställningar som vi arbetat med under terminen i samband med att vi ljussatt två teaterföreställningar som satts upp av Teaterhögskolan i Malmös examinerande masterelever. Vi tar upp frågor och tankar om ljuset, scenrummet och ljussättarens roll i det kreativa teamet. Syftet med detta arbete har varit att utforska hur vi kan ta hjälp av ljus och ljusdesign i skapandet av scenrummet. Hur vi definierar de rum vi arbetat i och hur det är att vara en del en produktion.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

Good comfort for the driver of a construction machine is crucial. Gearshift comfort is an important part of the total comfort. Volvo Construction Equipment Components has a simulation environment of the powertrain, SimPow, which is implemented in Matlab/Simulink. SimPow is mostly used for simulation of control strategies and performance. In order to be able to study gearshifting comfort, Volvo has an interest in developing new models for SimPow.

Bright Chest of DrawersThis project derives from a fascination of spaces which withonly light and shadow withhold a narrative value, which createsemotions and experiences with a minimum of objects. Iwanted to invesitigate light and lighting, and create a productthat can change the mood and experience of a spatial enviromentwith light. Questions I asked myself was: How do I relateto the spatial limitations that arise? How can I, with light asmy tool, give form to an immaterial value or state of mind?Will the object that illuminates be the most important factorof communication and meaning when I want to tell a story, oris it the light itself?The result became a chest of drawers that is lighted up frominside when you open the drawers. It serves a function as a unitfor storage of objects, but also makes us reflect of the importanceof objects, of how we define a spatial enviroment, andwhat we consider as private spaces in our home..

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.

When the emissions from the diesel trucks today accounts for a large part of the total emissions from the road traffic, the trend with a more extensive use of diesel trucks for transportation will therefore lead to increasing carbondioxide emissions to the atmosphere. Because of the fact that technical progress in the form of optimized engines and shifts in the means of transport sometimes result in even greater emission levels, other solutions to this problem must be studied to decrease the emissions of carbondioxide from the diesel trucks. The purpose of the thesis is to show how a decrease of the carbondioxide emissions from diesel trucks in Sweden can be achieved in a costeffective way by the use of a carbondioxide tax and a differentiated vehicle tax. The method used in order to fullfill the purpose of the thesis is studies of literature, mainly of public government reports. Literature of enviromental economics will be used to show the need of a tax and how to determine the dynamic effective carbondioxide tax in steady-state.

Due to the new demands put upon combat vehicles of today the development quickly strives for-ward. With developers and experts across the globe working to meet the needs of tomorrows armies. The question we ask ourselves is what will be the characteristics of these vehicles. In order to be able to categorize combat vehicle and analyze its characteristics we use the principles of war. Based on J.F.C Fullers theory from the early 19 hundreds that anything can be analysed using these principles, through a modern interpretation of the Swedish army, we can categorise the present and future abilities of combat vehicles.