The research within the management control systems-field and more specifically performance management has been rather shallow and not much has happened the last decades besides the balanced scorecard. The researchers see a lack of studies focusing on the effects of an integrated performance management system and also how it affects the different hierarchical levels and the tasks to perform.We decided to perform an essay with case study-characteristics by looking at both the strategic and tactical level at Volvo Group, or more specifically Group Trucks. We performed three different interviews, one at the group level and two at the division level. The aim was to see what effect an integrated performance management system had on the tactical level (i.e. the divisions).Our findings and corresponding analysis suggested that Volvo was a rather centralized company in order to get the performance management system to work by enabling a ?weekly control?.

Sweden is considered to have one of the world's highest animal welfare standards in agriculture. Despite this, there are shortcomings in animal husbandry. One example is overcrowding, which is a way to increase stock size without making costly investments in the buildings. It can be carried out systematically to increase profitability or due to, for example uneven calving during the year. The European Commission criticizes the fact that stocking density is not controlled under Swedish welfare inspections.

Föreliggande studies syfte var att undersöka validitet och intern konsistens för den svenska översättningen av Impaired control scale (ICS), en självskattningsskala som mäter grad av kontroll av alkoholkonsumtion. ICS består av subskalorna; Attempt control (AC), Failed control (FC) samt Predicted control (PC). Svar på ICS sammanställdes från respondenter (n = 203) som behandlats för alkoholproblem vid mottagningar i Västra Götaland. Faktoranalysen visade en bakomliggande faktor för AC, och två faktorer för FC respektive PC. Den interna konsistensen var god.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

The purpose of this thesis is to examine how the Management Control System is affected by a change in the owner structure from family owned to not-family owned. The study also tries to identify explaining factors behind the possible effects to the Management Control System. The study is based on a comprehensive case study on the company Alcro-Beckers which, in year 2001, was acquired from the owner Lindéngruppen fully owned by Ulf G Lindén. The acquirer was the non-family owned company Kemira OY, a Finnish stock listed group. The empirical foundation mainly comes from interviews conducted with people who were/are directly connected to the company, either as employees or as representatives for the owner.

This thesis has been carried out in collaboration with LEDtec International AB. LEDtec focuses on innovative solutions in LED screens. Everything from large advertising signs to welcome signs in cities, to screens indicating speeds or warning of heavy traffic. The task was to was to help them develop a new version of the control board that is used in some of their products. The reason for this is that their old control board is obsolete and the components that are on it, is no longer manufactured or in need to be renewed.

The aim of this study is to examine possibilities and barriers for an introduction of electric vehicles in Sweden. The study has an interdisciplinary approach and thoroughly examines the essential topics which influence the future of the electric vehicle. The study reaches from answering the question on why electric vehicles lost the game to petrol cars in the early 20th century, to sketch how the difference in total cost of ownership will be between electric vehicles and petrol cars for the coming 20 years. Apart from these subjects the main topics of the study are today?s and tomorrow?s situation regarding technology, charging, fuel, market and economic incentives from an electric vehicle perspective.

The purpose of this essay was to examine whether small businesses can avoid ac-counting crimes with a well-conducted internal control system. The questions we asked ourselves was, whether and if so, companies can prevent this from happening by using a internal control.In this essay we used a qualitative approach. Essential information was given to us from four different interviewees. We also worked from an inductive approach which means that we interviewed people without any earlier research to build on. The method also had a hermeneutical approach, which means that we made different interpretations based on the reference framework and the empirics.After the study had been carried out, we concluded that all evidence from this essay suggested that even small businesses need an internal control to protect their business.

En majoritet bland ledare i olika organisationer har en bakgrund som storasyskon eller ensambarn (Hudson, 1990). Denna studie genomfördes för att få svar på om personer med ledaransvar skiljer sig åt gällande syskonplats och locus of control jämfört med de personer som inte har ledaransvar. Ledare och medarbetare på en statlig myndighet svarade på en enkät gällande plats i syskonskara, erfarenhet av ledarskap och locus of control. Resultatet visade att sistfödda i detta urval hade en högre grad av intern locus of control än förstfödda vilket kan tyda på en annan typ av sistfödd på denna myndighet. Urvalet var dock bristfälligt (N = 48) och slutsats kunde inte dras utan att riskera ett felaktigt resultat..

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

Värnamo Elnät owns and operates a ripple control system which is used to control loadsespecially when the grid is heavily loaded and for control of street lighting. This report aims atclarifying technical and economic aspects of the ripple control system?s future. The system wasinstalled from 1975 and onwards and its use was greater in those days when the controllableloads where greater then today, the current controllable load level is about 3 MW. The reporthighlights three different aspects of the ripple control system?s future ? retain the currentsystem, reinvest in a newer system or discontinue the system.In the report the author also discusses relevant connections to Smart Grids and future meteringsystems and tariffs.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.

The purpose of this essay was to examine whether small businesses can avoid ac-counting crimes with a well-conducted internal control system. The questions we asked ourselves was, whether and if so, companies can prevent this from happening by using a internal control.In this essay we used a qualitative approach. Essential information was given to us from four different interviewees. We also worked from an inductive approach which means that we interviewed people without any earlier research to build on. The method also had a hermeneutical approach, which means that we made different interpretations based on the reference framework and the empirics.After the study had been carried out, we concluded that all evidence from this essay suggested that even small businesses need an internal control to protect their business.

We have performed a case study on Acne Jeans, a creative Swedish fashion company, which initiated a cooperation with the Swedish venture capital firm Öresund. The aim of our paper was to examine what motivates a venture capital firm to transform the management control system of a creative company, into a more formal system of control. Main results: Öresund did not have an excessive impact on the management control system of Acne Jeans, due to three main reasons. First of all, Acne Jeans had a satisfactory management control system prior to the cooperation. Furthermore, the relationship between the two parties was characterized by mutual trust.