Autonomous cars or robot cars havebeen on the agenda ever sinceHollywood started with their Sci-Figenre, maybe even before that. A lotof things have happened since then andnow the self-driving vehicle is notfar away. In this project, theAutonomous car with microcontrollerand ultrasonic sensors, we are lookingat a way of making a small, regular RCcar autonomous with relatively simplemeans and investigate how the bigcompanies does it to learn more aboutthe development of the autonomous carsand their technology.We used an Arduino Uno R3 supplementedwith an Arduino Motor Shield R3 as ourmicrocontroller board and three HCSR04ultrasonic sensors. By removingalmost all of the old parts of the RCcar,except the two DC motors, andreplacing them with these new parts wemanaged to make a vehicle that drovearound in a room without crashing intoanything. We could have used entirelydifferent sensors, or supplemented theexisting setup with other sensors tomake it even more accurate andobstacle avoiding.

This Master Thesis documents the development of an On Board Diagnosis (OBD-II) interface for remote diagnosis of vehicles. The Master Thesis is part of a project at the company Wayfinder Systems in Lund. The purpose of this thesis was to design a scantool that communicates with a vehicle through its OBD-II port using relevant standards. In order to make the OBD-II interface development easier, a car simulator was first built. Both the car simulator and the OBD-II interface were implemented using a linux computer running a C-program with serial communication with an external electrical interface.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

The purpose of this project is to get a fully functional, automatic steering system and a variable breaking system with an emergency breaking function to an off road vehicle. This off road vehicle is supposed to work as an aid in military situations. A team of two, Sebastian Attervall and Nichlas Gustafsson, got an order from Jonas Nyårds and the PreeRunners Project to construct a steering system that could manoeuvre an off road vehicle without any human involvement. To make this possible the vehicle would be guided by onboard sensors, cameras and computers. The team where also assigned to construct an automatic breaking system, there also no human would be involved.

All companies face risk in their daily business. Internationalised companies tend to experience higher risk due to for example unfamiliar business environment than companies that act only on the national market. Estonia became independent as late as in 1991 and is therefore a new interesting market for many companies in neighbouring countries like Sweden. Risks that are most apparent for an internationalised company are political risk, currency risk, capital and interest rate risk, business risk and credit risk. Our intention of this study was to find out how Swedish companies acting on the Estonian market faced the different risks when entering the Estonian market and how they value the risks today.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.

This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

After Sweden became a member of the European Union, EU, the debate regarding the Swedish participation in the EU?s currency co-operation, the European Monetary Union, EMU, has been intense. One of the biggest issues has been how our national economic politics will work within such a monetary union. What instrument will remain for the national economic politics within the EMU are highly uncertain. The question whether we will be able to affect our own economy or not has long been the essence in the Swedish debate.

The aim of this study is to examine possibilities and barriers for an introduction of electric vehicles in Sweden. The study has an interdisciplinary approach and thoroughly examines the essential topics which influence the future of the electric vehicle. The study reaches from answering the question on why electric vehicles lost the game to petrol cars in the early 20th century, to sketch how the difference in total cost of ownership will be between electric vehicles and petrol cars for the coming 20 years. Apart from these subjects the main topics of the study are today?s and tomorrow?s situation regarding technology, charging, fuel, market and economic incentives from an electric vehicle perspective.

Denna rapport handlar om utveckling av ett undervisningsmaterial för elever på fordonsprogrammet inom området elektroniska styrsystem. Rapporten beskriver processen från idé fram till färdigt undervisningsmaterial. Detta har tagits fram för att ge eleverna en bredare, mer generell kunskap inom detta ämnesområde än vad som är möjligt att få genom enbart teoretisk undervisning kring utvalda märkesspecifika system.  Undervisningsmaterialet bygger på teoretiska avsnitt som varvas med praktiska övningar kring en mikrokontroller med tillhörande sensorer och aktuatorer. Genom att skapa korta styrprogram som hanterar dessa sensorer kan olika funktioner skapas med hjälp av mikrokontrollen. Detta gör att många av de delfunktioner som används inom fordonselektroniska styrsystem kan simuleras..

Syfte: Syftet med denna uppsats är att analysera utvecklingen av användandet av elektroniska business-to-business auktioner, utifrån ett kundperspektiv i fordonsbranschen. Metod: Denna uppsats präglas av den kvalitativa metoden, för att därigenom ge en ökad förståelse kring utvecklingen av användandet av e-auktioner. Inledningsvis har en litteraturstudie genomförts, varpå intervjuer med representanter för företag i fordonsbranschen gjorts. Slutsatser: Som utgångspunkt har vi valt uppskattningen att e-auktioner skall motsvara 25 procent av den elektroniska B2B-handeln i fordonsindustrin 2002. Det råder en övertygelse om att en betydande missräkning gjorts.

To give a realistic impression in a driving simulator for nighttime driving, there are many challenging aspects to consider. One of the most important aspects is the illumination caused by the headlights of the own vehicle. To give a realistic impression there is the need to consider the characteristics of the headlight in use to be able to represent main and dipped beam, but also to represent different models and types of headlights. Another important aspect is the dazzling effects caused by the light cast by other vehicles upon the driver. These effects are not only important to give a realistic and visually appealing simulation, but also to simulate blinding effects which may affect the drivers ability to perceive the traffic environment to a large degree.

The objective of this paper is to estimate monetary and non-monetary costs for the huntercaused by deer-vehicle collisions in Sweden. These costs include losses in hunting value as wellas time and money efforts related to the handling of wildlife casualties. The calculations arebased on available statistics from 2004 on deer-vehicle collisions involving moose, deer, roedeerand wild boar and on telephone interviews with hunters involved in the tracking of injuredanimals. Altogether, the annual loss in hunting value for moose was assessed to approximately30 million SEK based on the 2004 accident statistics. For roe-deer and fallow deer, thecorresponding figure was approximately 56 million SEK and 1.2 million SEK, while wild boaraccounted for 1.3 million SEK, respectively.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Many of today?s societies are built on established financial structures that are controlled by states and central banks. These structures are built on a clear perception of economic systems as established but invisible institutionalised concepts that are operated by millions of organizations worldwide. An idea of counteracting against centralized economies by introducing a currency that no state or bank controlled was developed in the beginning of the 20th century. In 2008 the idea was realised by the introduction of Bitcoin, which is a digital currency and transaction system without any centralized emitter or controlling organ.