Chunks and Tasks is a programming model based on the C ++ programming language. This programming model is used for electronic structure calculations, among other things.The purpose of this project is to improve the CHT-MPI software library for Chunks and tasks, so that calculations of matrix-matrix multiplications are performed more efficiently than they do with the existing software library. The software library is based on the work stealing method, which is a method the software library for Chunks and Tasks uses for the distribution of the calculation work. The considered way to improve the software library is by modifying the work stealing method in a way that makes the distribution of calculation work happen in a more efficient way , which will lead to calculations performed faster than before.Two different modifications of the work stealing method were tested and it led to two new methods, Method 1 and Method 2, which distributed the calculation work differently. Method 1 did not give results that were compatible with the theory, since the calculation time with this method was much longer than the previous method.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

The following report is a constructive responsive evaluation of Svalövs communes unit for newly arrived refugees based on a qualitative user- and stakeholder model. The main purpose is to evaluate the units? quality from a user and stakeholder perspective. The main findings are that the users and stakeholders are satisfied with the quality of the units? services but request further social and structural participation.

Integration is a phenomena that occurs in all societies that experience any form of immigration. This process is dependent on how we analyze, both the groups of immigrants, and how we analyze the society in which they becoming integrated.Intersectionality is one method of analyzing this framework. By applying the categories: gender, class and race on the integration process, we get a more complex picture of the subject. Therefore we also become more able to adjust the actions and arrangement around the different questions of inte-gration.In this essay I try to explain what the intersectionality is, how it is used and how it can apply in integration as a specific subject. I also apply the intersectionality model on different policy documents from Malmö, Vellinge and Landskrona to find out if they show any awareness of this model both explicitly and implicitly..

Latent heat storage is a way to store thermal energy when a phase change material undergoes a phase change. The advantage of latent heat storage is the capability to store more energy per mass unit than other heat storage methods. The most commonly used phase change in latent heat storage is the transition between solid and liquid. Phase change materials can be divided into organics, inorganics and eutectics.In the Nordic electricity market the price of electricity is set every hour by Nordpool spot, which leads to price fluctuations because of changes in demand. The main goal of this report is to create a latent heat storage system in a single-family home and investigate the possibility to save money by charging the latent heat storage system when the price of electricity is low, and discharge when the price is high.The thermodynamic model consisted of a ?tube-in-tube? heat exchanger with phase change material in the outer tube and water as the heat transfer fluid in the inner tube.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

The goal of this paper is to find out how solar cells can improve energy efficiency on-board M/S Sydfart. The paper is based on a number of energy measurements on board the M/S Sydfart. The solar surface is calculated by measuring the available space for installing solar panels. Global radiation data is taken from STRÅNG's database, the data is then used to calculate the theoretical power produced by the solar cells. Energy efficiency is analysed in two ways.

This paper constitutes graduate work at the Depart-ment of Urban and Rural Development at the Swedish University of Agricultural Sciences. In this paper the urban structure of the million program suburb Husby in Stockholm is examined and what effect this structure has on social life in the area. The main objective of the study has been to, with the help of morphological analyses, examine how to create meeting places and make the Husby Park more accessiblefor the inhabitants in Husby. There has been a selection of analyses to ensure that Husby?s spatial relationship with surrounding suburbs as well as local spaces in the Husby Park is described.

This exam is about student?s perception of food and dietary advice. I illustrate food and eating from the youth's own perspective. The aim is to investigate how students perceive as "good" diet. It also reveals that students at the surveyed schools have poor knowledge of what is plate model.

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

Since their invention in 1999, CubeSats have become a widespread standard for small picosatellite missions. CubeSats allow for quick development of satellite payloads and launch in space without the high costs of a normal satellite. Emphasis during the CubeSat design process is placed on use of commercialoff- the-shelf (COTS) components and reuse of previously-designed units.This report describes the interfacing of a scientific magnetometer, the Small Magnetometer in Low-Mass Experiment (SMILE) to such a CubeSat mission, the Space Weather using Ion spectrometers and Magnetometers (SWIM). Design of a complete platform for use in multiple such missions is presented here.Modularity is one of the key aspects followed in the course of the work. A new board containing the analog pick-up and compensation circuitry for SMILE has been designed to fit inside a CubeSat frame.

The purpose of this masters thesis is to examine outlines of literary history for students at upper secondary school from a gender studies perspective. Earlier theoretical work concerning outlines of literary history is sparse. There are three dissertations, but none with an explicit gender perspective. The theoretical approach comes mainly from theories in literary historiography and gender research. Also discussed are the following concepts: canon, literary field and literary valuation.

Jag har studerat en liten torgbildning på Hisingen, Göteborg, i området Jättesten. Platsen är intressant då den har många besökare trots att den ligger vid sidan av de större stråken. Platsen har en del gestaltningsproblem och stora nivåskillnader, som gör den svår och otillgänglig. Intresset för torg och offentliga rum är större än någonsin och välgestaltade gemensamma platser har anlagts i nya bostadsområden såsom Norra Älvstranden i Göteborg, Hammarby sjöstad i Stockholm och Västra hamnen i Malmö. Men vad händer med förortstorgen från efterkrigstiden? Hur används 40-, 50- och 60-talets torg idag? I mitt examensarbete har jag också studerat olika torgstrukturer från olika epoker under 1900-talet då byggnadsidealen skilt sig åt.

The purpose of my project was to explore variability. I wanted to combine different ways of sitting and create some kind of seating furniture that could be changed to fit different kinds of situations and needs. I sought after a way to express safety and stability in the seating furniture and at the same time make it clear that it could be changed into something else or something more. It was very important to me that the furniture piece would have a long lifetime and would be something you kept for a long period of time. I decided that the changeable factor in my piece would be the possibility to change it from being a chair for one person into being a bench for two people.