The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

This examination work aims to describe how a supply chain around the biggest pellets factory in Sweden will be configured in a logistic perspective. The plant and associated infrastructure are in the building phase and will have production start on the 2 November 2009. The key question that is set in this examination work is to recognize the logistic processes which are essential for an effective flow of materials and information that link the source of supply with the ultimate customer. In order to get the answer, a flowcharting of these supply chain processes is required for understanding the pipeline activities such as input and storage of raw material, the production system and the output of pellets to the customers. The basis for this supply chain map is a model-based representation of these logistic processes and activities that are involved around the pellets factory.

The purpose of this master?s thesis is to examine whether the role of a public library in a rural community is different from that of a town library. To answer this, a case studie of two public libraries has been made. Interviews, collection of documents and observations were carried out on location in one public library located in a rural area, and one public library, situated in a town. A modified version of an analysis model, originally developed by Andersson and Skot-Hansen, was used to analyse the data.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This paper constitutes graduate work at the Depart-ment of Urban and Rural Development at the Swedish University of Agricultural Sciences. In this paper the urban structure of the million program suburb Husby in Stockholm is examined and what effect this structure has on social life in the area. The main objective of the study has been to, with the help of morphological analyses, examine how to create meeting places and make the Husby Park more accessiblefor the inhabitants in Husby. There has been a selection of analyses to ensure that Husby?s spatial relationship with surrounding suburbs as well as local spaces in the Husby Park is described.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

Företag förlitar sig ofta på datalager som aggregerar information från flera källor och över tiden. Dessa datalager är ofta centrala för beslutsfattande inom företagen, både kortsiktiga operativa beslut och långsiktiga strategiska. Eftersom information är en färskvara blir det allt viktigare att de dagliga laddningsrutinerna för datalagren fungerar. Denna rapport avser att analysera möjligheten att applicera principen model checking för en validering. Praktiskt avses att på ett automatiserat sätt använda Promela och Spin som verktyg för att validera att laddningsrutinerna för datalagret är korrekta..

AbstractMany opinions are divided on what religious freedom should protect and the area is unexploredin preschool. Is it the parents, the child or preschool teacher right? The aim of the studywas to investigate Maria klasson Sundin´s concept and theoretical models of religious freedomfor children through three Swedish preschool settings and also how three teachers interpretsand expresses children's freedom of religion. Through a qualitative interview study theaim was to investigate how the concepts of religion, autonomy and freedom is interpreted andexpressed by the teachers so a picture through this three concepts can categorise the teachersin a model; freedom of thought, tradition and life interpretation model so a broader picturecan be made to understand how the children's freedom of religion is expressed in the preschoolsetting and how the teachers work. The Result showed through the analysis that themodels fail to categorise the teachers in any theoretical model but on the other hand the understandingof preschool teacher?s expression and interpretation of the concept of religion,autonomy and freedom showed both diversity and lack of knowledge on the subject mattersreligious freedom which fall within the child rights issues.

The current standards for design of steel beams are divided into four classes based on the slenderness of cross-sectional parts. Depending on the section class a beams load capacity is either determined by a plastic, elastic or a reduced elastic model. The division between cross-sections calculated by a plastic and an elastic model is today done in a very harsh way with no smooth transition. This leads to a large difference in the calculated resistance for the sections located near the class limits. Elasto-plastic sections are in the current situation calculated as purely elastic and their large plastic reserve is not considered in the current standards.

Purpose: The purpose of the study is to in a comparative and causal way explore whether there is a relationship between risk and return and also how it is perceived on the Nordic financial markets.Theory: The theoretical frame of reference applied in the thesis is considered relevant inthe perspective of the study?s purpose and research questions. We have among other theories used The Capital Asset Pricing Model, The Efficient Market Hypothesis and various Behavioural finance theories.Method: The study has its starting point in a quantitative approach with a quantitative data analysis supported by secondary data extracted from Thomson Reuters.Empirics: The empirics contains regression analyses made from calculated secondary data of 240 randomly chosen companies from Nasdaq OMX Stockholm, NasdaqOMX Copenhagen, Nasdaq OMX Helsinki and Oslo Bors.Conclusion: The study conclusions show that there are both a negative and positive relationship between volatility and actual return on the investigated markets. Considering this prior statement we can conclude that the Capital Asset Pricing Model can?t correctly describe the actual relationship between the parameters investigated on the current sample.

This report is part of a Bachelor?s degree corresponding to 15 creditsat the Royal Institute of Technology, Stockholm. The work hasbeen carried out by Max Wikander, author of the report, supervisedby Lanie Gutierrez-Farewik and Erik Dijkstra.Gait analysis includes measurement, characterization and assessmentof human movement and is used to assess kinematic or otherabnormalities during gait. Center of rotation and the axis of rotationof a joint are fundamental parameters in motion analysis. However,the ability to create individualized analysis is limited by the lack ofaccuracy when these parameters are calculated.

Introduction: HR departments have been developed to take care of the organizations most important resource: the human being. HR as a function has however faced criticism claiming that the function does not entail any value to organizations. The rest of the organization often have a hard time understanding what HR?s daily work means and thereof not having a clear image of the function?s purpose or the function?s role in the organization Aim: The purpose of this study is to describe the relationship between the organization's view of the HR department (image) and the HR department's image of themselves (identity) in order to create a greater understanding of how the HR function successfully can be a well-functioning resource in an organization's overall business. Methodology: The study was conducted in the form of a case study. We have approached the issues by taking different perspective into account, which includes HR, managers and employees.

This work has been done to develop a plan for a future dairy barn at theGästgivaregården and to show the space needed for cows and replacement heifers. Itwould also show the storage that will be needed. The design was largely based on resultsfrom studies on six different farms, but also the facts that are taken from research papersand articles in order to compare theory with practice. Because some farms only whereinterviewed by phone I have used a query form to obtain comparable resultes.The aim is to build a new barn with Automatic milking. I've drawn a milking stable for120 milking cow and replacement heifers with the capability to house up to 140 milkingcows if the farm would expand in the future.Calculations of feed amounts and space requirements have been made to see how manyhectares are needed to supply the cows and replacement heifers with feed and to knowabout what size of storage space is required.The investigations made in this writing are to answer questions about the AMS-unit`sposition and how to best maintain a good health status in the herd.