The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The aim of this study is to describe a number of type stands of lodge pole pine in Norrbotten with respect on stem volume and total biomass. Further questions to answer is if there is stand characteristics that make the stands more suitable for pulpwood in early thinning, or if it is better to apply whole tree harvest. The study shall also give an indication if bio energy can be an economical interesting alternative for Sveaskog. Sampled trees represented the variation in the different stands. Five trees were selected from each stand to represent that stand. Stem volume and biomass (kg dry weight (DW) per hectare) for each fraction was calculated.

The purpose of this study is to analyze the economic effects of different fertilization programs both on stand- and forest-level. The study is applied on an objective sample of inventory data for a forest area in Kalix in northern Sweden. The forest area belongs to the forest company Sveaskog. The study includes different economic models and will be used as a support when the company decides how to invest and how much to invest in fertilization. The study investigates the economy of five different fertilization policies. For each program the rate of interest invested in fertilization and the cost for the extra produced volume has been calculated.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

This report is a thesis work for a B.Sc. in Forestry at the School for Forest Engineers, SLU. The aim of the work was to compare two different pricelists with the actual output from a harvester. The results have also been compared with a volume estimate of standing trees done by the Swedish Forest Agency and the ?true? value registered by the Wood Measurement Association. The study confirms that the output calculated by the computer on the harvester is more reliable than the volume of standing trees estimated by Swedish Forest Agency. .

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

The aim of this study is to investigate how multiple tree handling harvesters perform compared to earlier developed standards. The study shows that multiple tree handling harvesters are more efficient in thinnings stands with mean stock volumes less than 0,12 m3fub per stock. The increased efficiency is different for different mean stem classes. In stands with a mean stem volume of 0,04 m3fub per stock, the increase can be as high as 40 percent while it is about 10 percent in stands with a mean stem volume of 0,12 m3fub. Comparisons have been done between stands that are felled with partly limbed stands and stands without partly limbed assortments. The difference in performance is clear and shows that the partly limbed assortments strengthen the multiple tree handling harvesters positive effects in low dimension thinnings.

Old hollow trees of oak contain a large amount of wood mould. Unfortunately, these trees have in the last century been greatly reduced in numbers. It has resulted in that species that depend on these habitats, saproxylic species, have become at risk to decrease in numbers or die out regionally. Previous studies have shown that the volume of wood mould is an important factor for occurrence and population size of saproxylic organisms. The aim of the present study was to examine how the volume of wood mould varies among ash (Fraxinus excelsior), lime (Tilia sp.), maple (Acer platanoides), aspen (Populus tremula) and oak (Quercus robur).

The purpose of this study is to find out the viability in performing final felling in stands with high timber volume or if it´s more profitable to leave these stands to the next owner. Will he or she pay more for the standing stock then the industry? The prices of forest-land have increased significantly over the last couple of years in Sweden and some properties seem to go higher than others. Is this because of higher standing stock volume or can a certain volume/hectare bring a higher price? Maybe a combination of both? This study is based on the the sale-statistics for 2012 from real-estate agency Areal.

The construction industry can contribute to a healthier sustainable community. A development that is going on right now is by using more prefabricated volume- and plan elements on the construction sites. Building with this method not only provides a benefit to the environment, but also reduces production rates by taking up to 80 percent less time to build. By building in this way it will be easier to recycle and keep all the material that otherwise would go to waste. Also by building inside a protected environment, the material retains its good quality.This report will take forward proposals on further development of prefabricated volume element of wood, by first presenting this construction methods advantages and disadvantages..

This thesis describes an optimising compiler for translating from SMV to CLP(B). The optimisation is aimed at reducing the number of required variables in order to decrease the size of the resulting BDDs. Also a partitioning of the transition relation is performed. The compiler uses an internal representation of a FSM that is built up from the SMV description. A number of rewrite steps are performed on the problem description such as encoding to a Boolean domain and performing the optimisations.

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

Background: The background explains different financial crises and the effect those crises had on the Swedish acquits regarding variable compensation. The resent discussion regarding variable compensation and the main problems with bonuses is also explained. Our theories for this essay is mainly based on the new directions from Finansinspektionen FFFS 2009:6,7 and stakeholder theory. Other theories used are agency theory, stewardship theory and economic man.Purpose: The purpose of this essay is to analyze the new directions for variable compensation and to investigate if these new directions can lead to a more long-term thinking for managers in banks. Method: We used semi-structured interviews with open questions for our survey.