ABSTRACTPurpose: The purpose of the study was threefold. Firstly, to investigate if a four week program in pain rehabilitation had any effect on how much individuals with persistent pain worked and their degree of kinesiophobia. Secondly, to study if there was a correlation between how much these individuals worked and their degree of kinesiophobia. Thirdly, to study if there was a correlation between the change in these variables.Method: 112 patients who had participated in a four week rehabilitation program took part in the study. The study had a retrospective design, which was based on a review on medical records and consisted of three minor parts.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

This project measures the upper bound of exposure time for laser reflection detection in the software DotDetector. Via measurement of the exposure time for which distortion happens in a room lit with everyday light we conclude that the upper bound for exposure times are 100 milliseconds. This value does not change as long as the lighting in the room is the same. As future work this project proposes variable upper bounds depending on secondary lighting in the room. Also we propose automating the colour masking of the detection algorithm..

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

Vår studie bygger på artiklarna ?Fads, Martingales and Market efficiency? och ?Volume and Autocovariances in Short-Horizon Individual Security Returns? och är ett replikat av dessa.Studiens syfte är att undersöka förhållandet mellan förändringar i aktieomsättningen och veckoavkastningar för enskilda aktier på Stockholmsbörsen..

The efficiency of the harvesters work is more often reviewed, than the work of the forwarders. In a local Stora Enso office the differences between the harvesters reported volume of timber, and the actual volume delivered to the industry had been noticed. Therefore, the decision was made to do a review on the forwarders work. The review was conducted together with a worker from Vmf Qbera, who is working daily with wood measurement, in order to get a valid evaluation of the logs. Eight sites were included in the survey, and on each site 50 logs were marked. Approximately one third of the marked logs were pulpwood, and the remaining logs marked were timber.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

This study represents the different factors that may have an influence on the budgetproposal in the local government for the revision. The revision in the local government is an important part of councillors and public insight into the different activities. The budget for revision decides how much of the activities runned by the local government can be observed by the elected representative accountant. The aim of the study is to see how the following variable affect the dimension of the budget appointed for revision. We have used Institutional theory, theory that contains the role-play between guardians and advocates and Agent theory with help of accountability.The dissertation is written in Swedish..

The purpose of this study was to develop two types of prediction models for Scots Pine and Norway Spruce. The first type for calculation of the stump diameter under bark the year the tree reached breast height (Dstubh130). The second type for calculation of the annual difference, e.g. the number of growth years between stump height (0.2 m) and breast height (1.3 meters above ground level). The primary thought with these prediction models is to obtain the breast height age in the trees on basis of the number of annual rings at stump.

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

Prosthetic leg can give a negative psychological effect to the user, which ends up in decreased self-esteem and that the user hides his handicap. xCover gives a more natural volume and a cool look. xCover changes the look of the prosthetic leg C-leg. The product is constructed by us, Patrik Svensson and Magnus Zetterqvist, for Christoffer Lindhe at Lindhextend AB. Christoffer has hired Martin Bergman at Smedjan 17 to make the design.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.