Cannibalism can have major influence on fish population dynamics. A prerequisite for cannibalism is that the cannibal and the potential victim meet, and besides density effects, the encounter rate between cannibals and their victims is therefore also largely dependent on habitat use and habitat heterogeneity. In this study I quantified and compared the potential for cannibalism in stream-dwelling European grayling populations in three rivers in Jämtland by means of habitat classifications. I also analyzed population dynamic consequences of varying the potential for cannibalism in terms of intensity, using a physiological structured population model. Findings based on habitat characteristics were that the potential for cannibalism is in general not favourable in these types of streams.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the Value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

Bakgrund: Att utveckla och förbättra organisationer genom effektivare användning av de resurser man har till förfogandet har blivit allt mer betydelsefullt under de senaste decennierna. Genom fokusering kring de aktiviteter som tillför värde hos kunden i slutprodukten kan företag reducera och eliminera oönskade slöserier inom tillverkningsprocessen. Ett verktyg som utvecklats och används för att eliminera dessa oönskade aktiviteter så som lagerhållning är Value stream mapping (VSM). Problemformulering: Hur kan man identifiera slöserier samt dess förbättringsmöjligheter för att möjliggöra en högre produktionskapacitet genom frigörandet av anläggningsyta?¨ Syfte: Genom användandet av VSM som modell, identifiera slöserier och kostnadseffektiva förbättringsmöjligheter. Metod: Denna fallstudie har utförts på ett företag som arbetar inom metallindustrin. Större delen av datainsamlingen har tagits från företagets egna dokumenterande data samt intervjuer med anställda och observationer under de besök författarna genomförde. Slutsatser: Genom att använda VSM som en modell har författarna lyckats identifiera fallföretagets största faktorer till slöserier samt ge förslag och underlag till framtida förbättrings implementationer av förbättringsstrategier.

The purpose of this study is to increase the understanding of activities, flows and waste in a company's production process. By performing a Value stream analysis, non-value adding activities are identified in a production process and then the suggested improvements that can reduce lead times will be stated. The value-stream mapping identifies the flow of information and the flow of material in a production process and this provides the basis for the identification of non-value adding activities.We conducted the study at Lammhults Möbel AB in Lammhult Sweden, where the production flow of Spira-21 has been investigated. This to identify any non-value adding activities that affect the flow negative and consumes time and money in a non-value adding way.A reasonable approach for the project was taken by studying the methodologies and theories. We conducted interviews and site surveys at Lammhults Möbel AB where the flow of information and material in the production process were investigated.

Internet of Things är ett samlingsbegrepp för den utveckling som innebär att olika typer av enheter kan förses med sensorer och datachip som är uppkopplade mot internet. En ökad mängd data innebär en ökad förfrågan på lösningar som kan lagra, spåra, analysera och bearbeta data. Ett sätt att möta denna förfrågan är att använda sig av molnbaserade realtidsanalystjänster. Multi-tenant och single-tenant är två typer av arkitekturer för molnbaserade realtidsanalystjänster som kan användas för att lösa problemen med hanteringen av de ökade datamängderna. Dessa arkitekturer skiljer sig åt när det gäller komplexitet i utvecklingen.I detta arbete representerar Azure Stream Analytics en multi-tenant arkitektur och HDInsight/Storm representerar en single-tenant arkitektur.För att kunna göra en jämförelse av molnbaserade realtidsanalystjänster med olika arkitekturer, har vi valt att använda oss av användbarhetskriterierna: effektivitet, ändamålsenlighet och användarnöjdhet.

Bakgrund: Den svenska produktionsindustrin hotas utav så kallade låglöneländer som kanerbjuda samma tillverkning med en högre lönsamhet. Detta gör att verksamheten måste varaattraktiv för såväl investerare som kunder vilket gör att företaget måste genomföra ständigaförbättringar för att klara konkurrensen. Detta är något som även Xylem i Emmaboda kännerav. Xylem tillverkar ett brett utbud av dränkbara vattenpumpar men även annan utrustningsom krävs för att leverera vattenteknologi. Tidigare studier på en utav Xylems verkstäderOPX har visat att produktionen lägger mycket tid på aktiviteter som inte är värdeskapande såsom materialhantering och andra förflyttningar genom fabriken.Syfte: Syftet med uppsatsen är att identifiera var det kan finnas slöserier genom att utföra enValue stream mapping på en utav Xylems verkstäder i Emmaboda.Metod: Arbetet består av en fallstudie med explorativt syfte som utförs genom en Valuestream mapping.

Background: The demand for sending letters, in the traditional aspect, has decreased because of electronic sources which have replaced a big part of letter communication. The Postal Service constantly strives for lowering costs and due to the changeable demand, a greater awareness is required regarding recourses and their usage. The previously mentioned measures in combination with commonly occurring quality issues during the collective process at the letter terminal in Alvesta would be improved by applying a lean-perspective to the process. A first step towards saving of time is to apply the ?Value stream mapping?-method on the collective process for small and large letters.Purpose: To map the process of collection for small and large letters to be able to identify waste of recourses and furthermore give suggestions on how the Postal Service would be able to reduce the waste of recourses identified.

Med utgångspunkten att ständigt förbättras och öka konkurrenskraften arbetar Alfa Laval mot Leanprinciper. Vad som dock är ett problemområde är att se över fabriken ur ett helhetsperspektiv, närfabriken är uppdelad i många avdelningar. Lösningen till detta problem är att via olika metoder ellerverktyg kunna fastställa svaren på problemen.Denna examensrapport redogör för hur metoder inom Lean produktion kan vara lösningen förproblemområdet. Forskningen är huvudsakligen byggd på en bred värdeflödesanalys som syftar till attfånga in ett företags alla aspekter ur ett helhetsperspektiv, med syftet att minska risker försuboptimering och istället optimera produktionen som helhet.För att se gränssnitt mellan informationsflödet har i denna forskning metoden swimlane utgjort enkartläggning över ett företags hela kontorsavdelning, planerings och inköps avdelningar.Resultatet av denna forskning visar att värdeflödesanals är en bra metod för att kunna identifieraslöserier, ojämnheter i produktion, brister vid tillverkningen och flaskhalsar. För att sammankopplaolika avdelningar av ett företags informationsflöde, visas i resultaten att swimlane är en bra metod försyftet..

Clarice Lispectors is one of Latin Americas most famous writers, and she wrote a number of books during her lifetime. Her novel Stream of Life (Água viva), which came out in 1973 and was translated into Swedish in 2007, is considered to be one of Lispectors most difficult texts to read. It consists of several fragments put together into one text; however the text has no traditional narrative or structure. It is the flow of moments that moves the text forward, as it is written down by the protagonist in the book.The primary aim of this essay is to examine how the protagonist in Stream of Life through different means, as the moment, the description, the word and the variations, creates an active participation in the formation of its identity. I will discuss the moment and its act of constructing the book?s circular structure, which is of importance.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

Running water-pathways have played an important roll in Sweden and frequently been manipulated. One profound change was made during the period of logging when streams were cleared from obstacles as big boulders, sharp bends and side-streams. Dams and different constructions gave control of the stream water and the streams became channel-like with a homogen structure. This interference gave problems for many fish populations and resulted in a shortage of feeding habitat, over-wintering habitat, spawning habitat, unnatural flow regimes, sedimentation, unnatural temperature fluctuations. Many of these historical changes of the watersheds are now subjects for restoration, ie., bring back the streams to what we believed it was before the change. However, what once existed in terms of complexity is now gone and difficult toreplace.

The aim of the study was to map the extent of Fe, Cu, Pb, As, Zn and S contamination in the area surrounding the Nasa silver mine. The mine operated between 1635 and 1810 with some prospecting performed in 1889, and has become infamous for the gruesome ways that the indigenous people were treated during the early years of operation. This study tested three hypotheses through a geochemical survey: 1) sulfide oxidation is still active in the abandoned mine, 2) the soil downslope of the mine is contaminated by mine drainage, and 3) the stream downslope of the mine is affected in the same way. All three hypotheses were valid, as the results showed that still, >200 years after mining operations ceased, signs of the historical mining are clearly visible in the surrounding environment. Acidic conditions were discovered in surface waters close to the waste rock piles, which indicates active sulfide oxidation.

Timber floating operations in Scandinavia during the 19th and 20th centuries has contributed to severe negative impacts on riverine ecosystems. Increase in water velocity and lack of stream bed heterogeneity as a result of stream channelization lead to increased bed load transport. Since availability and recruitment of new suitable spawning substrate in Scandinavian watercourses is sparse, spawning habitats for salmonids has become a scarce commodity. Lately, increasingly more attention has been given to the recreation and improvement of brown trout (Salmo trutta) spawning habitats in restoration projects. While much of the research on spawning habitat has been focused on evaluation of the influence that the constructed spawning grounds have on fish populations, few studies have been conducted to evaluate the persistence of these constructions over time. I evaluate erosion of constructed spawning beds as an effect of sediment transport attributable to water discharge.

Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

The thick-shelled river mussel (Unio crassus) is a red listed species classified as Endangered (EN) and is also considered within the Habitats Directive. The distribution in Sweden is fragmented and it is mostly occurring in the south eastern parts. We investigated the presence of Unio crassus in a section of the stream Storån, Östergötland County, from Falerum to the inflow into Lake Åkervristen. The environmental parameters investigated were water depth, bottom substrate, shading, water velocity and the slope over the water surface. In this thesis I have focused mainly on water depth and shading, comparing sites with and without mussels.