Modern forestry requires a high degree of machine traffic for clear felling and scarification operations. The machines most frequently used are big and the traffic often results in tracks on the forest ground. There are many small streams running through a forest, in connection to logging operations, machines might cross these frequently. These crossings could result in the erosion of fine particulate inorganic matter, which ends up in the stream. The aim of this thesis was to give a general description of small forest streams of order-one in the county of Värmland and to determine the frequency of machine tracks in small streams.

The background to this work was to see if there was a connection between large woody debris (LWD) and the presence of brown trout in our Swedish forest streams. Previous researches by Degerman et al. (2004) have shown that there is a strong correlation between the amount of dead wood and the presence of brown trout. The goal was then to find a way to restore, maintain and increase the trout habitats by constructing and adding manmade wooden structures that would mimic natural deadwood and its features in flowing water. The inspiration was partially taken from a water restoration program in the Klamath River of northern California, USA.

The purpose of this report is to answer the question:How do you create a media player that can stream music for a website?We started the work by searching the web and reading books about the subjectand found several technologies to use to stream media files over the internet.We decided upon using the http protocol and created the media player itself inMacromedia Flash.The website is mostly developed with PHP, JavaScript and CSS templates andthe websites design was created with Macromedia Dreamweaver and AdobePhotoshop. We also created an administrative system for the media player withPHP programming.The website contains a simple guestbook; the guestbook makes use of adatabase created with MySQL.Our work resulted in a webpage with a fully functional media player thatstreams audio files together with a corresponding administrative system for it..

Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Syfte: Syftet med examensarbetet är att undersöka möjligheter till effektivisering av fjärrvärmeinstallationer i småhus med hjälp Lean. Detta har gjorts genom att besvara de tre följande frågeställningarna:Hur ser en fjärrvärmeinstallation i småhus ut i dagsläget?Vilka slöserier går att identifiera i processen för fjärrvärmeinstallation i småhus?Hur kan slöserier i processen för fjärrvärmeinstallation i småhus minskas?Metod: För att uppfylla examensarbetets syfte har en fallstudie genomförts på Jönköping Energi som är en leverantör av fjärrvärme. Där har intervjuer och dokumentationsstudier använts som datainsamlingsmetoder. Litteraturstudier har gjorts för att samla in information kring teorier som sedan använts för att utvärdera och analysera empirin.Resultat: Genom studien har slöserier identifierats i processen för fjärrvärmeinstallation i småhus.

Vattenfall Heat Uppsala runs the waste incineration plant in Uppsala, which produces district heating, process steam, district cooling and electricity. Vattenfall Heat Uppsala has decided to introduce an energy management system with the aim to increase the energy efficiency of the plant. The basis in such a system is to make an energy mapping.In this thesis an energy mapping has been performed at the waste incineration plant with the aim to identify and determine the size of energy flows. The investigated energy flows are used fuel, produced and used steam, produced district heating and cooling. Also the use of electricity to run the processes has been investigated.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with Value Stream Mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

This report is presenting an approach that can be used to measure water surfaces in difficult conditions caused by dense vegetation and lack of nearby known points. The objective was to make a contribution to necessary measures for adaptation against floods in Grums Municipality along the stream Karlbergsån, which may occur when persistent rain raises the level of the stream. Along the river there are low-lying areas prone to flooding. According to Grums Municipality, the stream may widen where the water level differences are large, to create a better flow path and to counteract flooding. Grums Municipality was also interested in survey stormwater discharges which may affect the water level in the stream.

The estate of Rämningstorp in the region of Västergötland in southern Sweden is administered by the holding trust company Skogssällskapet i Skövde. In 1999 measures were taken by Skogssällskapet to drain the stream Fredstorpsbäcken as a means to increase the forest productivity of the surrounding lands, which are situated on the estate of Rämningstorp. Almost immediately after the drainage, the streamwater turned turbid and a landowner downstream reported the issue to the county administrative board of the region. The aim of this thesis was firstly to analyse the suspended matter that appeared during summer/autumn and secondly to explain why it came to be. Initial hypotheses for the explanation to the greyish turbid water were that it was either 1) a chemical/biochemical precipitate, or 2) an bacterial/algal blooming.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with Value Stream Mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated. Requirements written by different people in different organizations were analyzed in order to sort out if there were some similarities? which could be used as standard elements in a future standardization of the process.

The aim of the study was to examine if the benthos in a restored portion of a small lowland stream south of Linkoping differed from two non restored reference areas two years after restoration. The reference areas were one stretch downstream and one upstream stretches of the restored stream. The benthic invertebrates were collected using standardized kick sampling. In order to classify the communities and estimate any differences, three different indices were exercised. In addition rank-abundance curves and checklists were used to get a picture of species composition.

Optimering är ett ständigt problem att brottas med som inom spelbranschen. Endatorgrafiker som arbetar med spel ska inte bara skapa så estetiskt tilltalandemodeller som möjligt utan måste även få dessa att fungera tillsammans med detekniska krav som ställs utav industrins spelmotorer och hårdvara.Tesselering och displacement mapping är ett exempel på industrins olikatekniker för att ge spel en mer realistisk rendering genom att förbättra siluetter,ge mer korrekta detaljer och samtidigt avbelasta tunga beräkningar från CPU tillGPU genom att utföra geometrins polygonhantering på grafikkortet.Tesselering och Displacement Mapping har börjat öppna upp nya möjligheterför hur moderna spel kan se ut och som datorgrafiker så måste du kunnaidentifiera när, var och hur dessa tekniker bör användas.Detta examensarbete går igenom modellering, bakning och användning avdisplacement mapping på tesselerade geometrier inom en rad av grafiskaanvändningsområden med hjälp av ett par enkla tester i hopp om att göra digsom läsare redo för att skapa realistiska modeller..

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,Value Stream Mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

A well known optimization-problem of multiprocessor system is scheduling of tasks. In this paper I use a variant of previous known algoritm, (Fast Critical Path) for scheduling real-time tasks on a multiprocessor system. This is made in a simulation study in MATLAB. The system architecture is assumed to be a MIMD- machine, (Multiple Instruction stream Multiple Data stream) with bus-typologi and message-architecture. Scheduling was made on this system where the number of processors varying from five to ten.