AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The Swedish government has introduced a goal to reduce the energy intensity by 20% to the year 2020. To reach this goal actions need to be taken throughout the energy sector which includes residential and commercial buildings. This thesis considers the possibility to reduce the energy usage in a building located close to Uppsala. The analyzed building is a combined office, cafeteria and entrance and was completed about half a year before this project started. Therefore the measures presented for a more energy efficient building are presented as measures for future constructions.Simulations have been made in VIP-Energy, a dynamic energy calculation program.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

This M.Sc. thesis is a material application evaluation commissioned by the advanced body engineering department at SAAB Automobile AB. The purpose of the thesis is to evaluate implementation of the innovative sandwich design material Hybrix into an automobile body. Today the most commonly material used in the body is galvanized steel sheets and by shifting material to Hybrix several problematic issues have to be dealt with. Hybrix is an innovative sandwich sheet that inherits thin stainless steel face sheets and a stainless steel fibrous core.

The Anglo-Saxon trust is not a new phenomenon, but existed as early as in the Middle Ages. The concept is customary among common-law countries, such as England the US,but unfamiliar to civil-law countries like Sweden. The person who creates the trust is called a settlor, the one who holds and administer the property is a trustee and the person who benefits from the settlement is called a beneficiary.In Sweden there is no legislation of how the trust ought to be assessed, but the need to understand it has probably increased with the internationalization.The Swedish Supreme Administrative Court has had a few opportunities to elucidate some of the uncertainties regarding trusts, but chose to abstain. With this The Swedish Tax Panel has very limited guidance from the court when they receive an application of an advance notice.A trust is not a legal entity nor a tax subject. This differs the trust from a foundation and they can not be placed on an equality from a Swedish tax perspective.In an advance notice, 2010-03-23 (dnr 103-09/D) om Inkomstskatt: Inkomst av tjänst ? värdepappersförmån, the Swedish Tax Panel equalizes the trust property with shares when determining how to tax the assets.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

The Anglo-Saxon trust is not a new phenomenon, but existed as early as in the Middle Ages. The concept is customary among common-law countries, such as England the US,but unfamiliar to civil-law countries like Sweden. The person who creates the trust is called a settlor, the one who holds and administer the property is a trustee and the person who benefits from the settlement is called a beneficiary.In Sweden there is no legislation of how the trust ought to be assessed, but the need to understand it has probably increased with the internationalization.The Swedish Supreme Administrative Court has had a few opportunities to elucidate some of the uncertainties regarding trusts, but chose to abstain. With this The Swedish Tax Panel has very limited guidance from the court when they receive an application of an advance notice.A trust is not a legal entity nor a tax subject. This differs the trust from a foundation and they can not be placed on an equality from a Swedish tax perspective.In an advance notice, 2010-03-23 (dnr 103-09/D) om Inkomstskatt: Inkomst av tjänst ? värdepappersförmån, the Swedish Tax Panel equalizes the trust property with shares when determining how to tax the assets.

I have always lived around mines and around people work­ing with mines. They are a natural part of my life and, inev­itably, a great interest of mine. When time came to make a decision for a degree project, focusing on the mine context felt as natural as breathing.In LKABs underground mines, safety in fire accidents is a great priority. Of outmost importance for the escape is to have a personal gas filter for filtration of smoke and/or gas. My design project resulted in a concept which is aimed at shortening the user journey from the start of the accident until the user has applied the personal safety solution and is ready to escape.Throughout the project I?ve been working with a context which is heavily regulated, and all problems are serious, important ones.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

This pre-study investigates the possibility of U-value measurements through an acoustic method. A hypothesis about an acoustic model built on acoustic theories combined with U-value theories is presented to answer the questions: ? Can U-value theory be combined with acoustic theories? ? Can the coefficient of heat be affirmed trough an acoustic measurement? The idea for this dissertation begun with a logical idea in mathematical similarity, between the coefficient of heat transmission units and sound intensity units. The U-value theory is based on assumptions such as initial resistance for inner walls and initial resistance for outer walls. The resistance in the material is interpreted through sound intensity theory. The argument is built upon mass law theory, which means if the frequency or thickness of the material layer doubles it implies an increase of sound reduction by 6 dB.

The ability to detect protein-based biomarkers, which are linked to different diseases like colorectal cancer, is very important as a diagnostic tool. Usually complex biological samples like blood are studied which will contribute to different technical issues when performing an assay. The aim with the project is to optimize and develop the high throughput protein detection technique Proximity Extension Assay, PEA, into a 96-plex panel, in hopes of discovering an expression profile for colorectal cancer. PEA was developed by Olink Bioscience and allows specific proteins in a sample to be quantitatively transformed into nucleic acid sequences that are subsequently detected and quantified with real-time PCR. Two proximity probes containing oligonucleotide sequences bind pairwise to target protein and when brought in proximity, a DNA polymerase will extend a hybridization arm from one probe over to the second forming a double-stranded DNA sequence that can serve as a template in real-time PCR.

This report provides a comparison between the products cellular concrete, foam concrete and LECA concrete. The questions to be answered during the work is how the cellular concrete stands up in cost terms to the existing competitors on the market, how the concrete products differ in design work, and in which situations the concrete varieties are preferred to use.Cellular concrete is a variant of ordinary concrete, with the difference that the ballast is exchanged from stone materials to expanded polystyrene beads (EPS). This substitution gives a product with higher insulation values but lower weight than ordinary concrete.The work was carried out by designing a survey which was sent to two hundred randomly chosen companies across Sweden, to see the building industry?s opinion of the product cellular concrete. The survey showed that cellular concrete was equals its competitors in terms of price, while the product was said to be more flexible, quicker and easier to cast.Then some of the companies, who participated in the survey, were interviewed to see more carefully, how the price, the workmanship and the time for casting and dehydration differed between the products.