The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system.

The ability to detect protein-based biomarkers, which are linked to different diseases like colorectal cancer, is very important as a diagnostic tool. Usually complex biological samples like blood are studied which will contribute to different technical issues when performing an assay. The aim with the project is to optimize and develop the high throughput protein detection technique Proximity Extension Assay, PEA, into a 96-plex panel, in hopes of discovering an expression profile for colorectal cancer. PEA was developed by Olink Bioscience and allows specific proteins in a sample to be quantitatively transformed into nucleic acid sequences that are subsequently detected and quantified with real-time PCR. Two proximity probes containing oligonucleotide sequences bind pairwise to target protein and when brought in proximity, a DNA polymerase will extend a hybridization arm from one probe over to the second forming a double-stranded DNA sequence that can serve as a template in real-time PCR.

Works on transparent paper, also commonly known as tracing paper, have been described as ephemeral or temporary working documents and they usually number large quantities in archival and museum collections. They have therefore previously been considered of lower priority and can be found in poor condition due to a lack of treatment or suitable storage prospects. In addition, transparent paper can be very sensitive to moisture and reacts by deformation or loss of transparency. Due to the volume of these works and the necessity of treatment, there is a call for simple and efficient conservation methods. A common solution in archives for the treatment of water-sensitive works on paper has been the use of heat-activated tissues as they can be applied without the introduction of solvents. There is little published about the use of heat-activated tissues on transparent paper and is mentioned only briefly in existing literature.

Syftet med denna studie är att undersöka om det finns någon betydelse av den fysiska arbetsmiljön i förhållandet till lärandet. Undersökningen är gjord med hjälp av litteraturstudier och enkäter som besvarats av elever på fem yrkesförberedande program i årskurs två.  I resultatet framkom elevernas syn på skolans och den arbetsplatsförlagda utbildningens fysiska lärandemiljö. Exempel på förhållanden som eleverna uppmärksammade var ventilation, ljus, måltidsmiljön och läraren. Enligt litteraturstudierna var det ett flertal faktorer i den fysiska arbetsmiljön som påverkar lärandet såsom ljud, ljus, ventilation och underhållsskicket av arbetsmiljön.Nyckelord: Lärande, fysisk arbetsmiljö, ergonomi, skolans innemiljö, måltidsmiljö..

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

In recent years it has become more and more evident that man has contributed to much of the climate changes that have taken place during the last century. A major challenge today is to reduce emissions and energy usage at the same time as the global population is growing. To contribute to a better environment, Stockholms Stad has set at target of becoming fossil fuel free by the year of 2050. The construction of new districts is done with this goal in mind; energy efficiency and renewable energy sources are examples of methods to achieve this.Solar energy is considered to be a sustainable energy source and the most common techniques to harvest solar energy in Sweden are solar cells and solar collectors which produce electricity and heat respectively. This report aims to investigate whether an investment in any of these systems would prove to be economically beneficial at Kvarnholmen, a district under construction in eastern Nacka, Stockholm.Since the finished blueprints only cover a small portion of Kvarnholmen, the report examines the possibilities for a house where construction has already begun, Nya Kvarnen.

I want to look at the possibilities to start selling hot water from a small district heating plant with bioenergy. My reason for doing this project is to look at a new business opportunity for our farm. Our company have less work during the winter time compared to the spring and this project will give us more work during the winter. I also want to take as much material as possible for heating from our farm in order to increase the value of the products from the farm. The project is in a village near us, where we should support a school, a churh, a home for the aged, a kindergarten and a parish hall with heat. In my work I have compared two different alternatives with each other. The first alternative is to put a central heater in one of the buildings, the home for the aged, in which we will burn oat.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.

Private state aid enforcement with respect to below market value transactions carried out by Swedish municipalities ? A study on the conformity of Swedish procedural and substantial rules with the principle of effectiveness of EC law Recently in Sweden, several local governmental entities (municipalities) have engaged in commercial transactions that, essentially, have been aimed at transferring the ownership of public services ? for example schools and local medical care centers ? to private undertakings. A few of these transactions have been declared by Swedish administrative courts to constitute illegal below market value transfers of public resources. The essay seeks to determine whether the Swedish national provisions that govern legal claims based on the directly effective Art. 88(3) of the EC Treaty, are compatible with the principle of effectiveness, i.e.

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

Det är svårt att förutse om det finns risk för brandgasspridning via ett ventilationssystem och det krävs ofta analytisk dimensionering för att verifiera ett fullgott brandskydd. Idag används olika simuleringsprogram för att verifiera ventilationsbrandskyddet. FDS är ett simuleringsprogram som genom utgåva sex kommit med en tilläggsfunktion, HVAC (Heating, Ventilation, and Air Conditioning) där naturlig- och mekanisk ventilation kan simuleras med hjälp av ett system byggt av noder (nodes) och kanaler (ducts). Funktionen tillåter även att läckage simuleras på ett beräkningstekniskt stabilare sätt än i tidigare versioner. HVAC- funktionen är indirekt kopplad till de övriga CFD- beräkningar i FDS för att inte behöva gridcellsindela systemet vilket hade krävt betydligt mer datorkapacitet.

The aims of this project were to describe the circumstances around dogs being left alone in cars, to investigate owners? knowledge of the risks associated with leaving dogs in cars and the relevant legislation and, finally, to study how changes in the air temperature and air composition in the car affect the dog. The project consisted of a survey of the literature, a questionnaire part and an experimental part. An important conclusion is the importance of the level of knowledge of owners, since there are several ways in which an owner can prevent their dog from heat stroke and, in the case of an eventual accident, their action can have direct consequences in minimizing the long-term damage to the dog and even whether or not it survives. Fewer than half of the owners in the study knew that for a dog suffering heat stroke, the most important thing is to bring the body temperature down. Only a third of dog owners knew that if a dog is left in a warm car and showing signs of heat stress, then the police should be contacted and the dog quickly helped out of the car.