This study examined the factors influencing dairy farmers´ decisions to invest in automated milking systems (AMS). The problem studied involves uncertainty, information and complexity for dairy farmers in specific decision contexts. The frame of reference in the thesis combines contingency theory and decision theory and is used in a qualitative analysis of a set interview with dairy farmers who have recently bought an AMS and salespersons from Delaval, one of the AMS suppliers.The aim of this study is to develop an understanding of the decision making processes of dairy farmers, and in particular to identify which types of factors influence the outcome of an investment decision in the technological development of a farm.The study uses Thompsons` (1967) theory about the structure that organizations develop to handle the input of information. Thus, interest is focused on how a farm business structure handles information in the AMS decision, investigating the differences in information with Delaval?s "feed first principle" system and Lely?s "free cow traffic" system.The results of the qualitative interviews with the dairy farmers who bought an AMS show that there are three important factors that influence the outcome: employees, suppliers and the owner.

Introduction: Dental health globally is not equally distributed as shown by caries prevalence is higher in areas with more immigration outside Scandinavia and Western Europe and areas with lower socioeconomic status. To reduce the health inequalities in Borås, a dental health project was made in five kindergartens in the district Hässleholmen. Purpose: The purpose of the survey was, by interviews with the actors involved (teachers, children, parents and the public dental service) find out the views of the project, and whether the project is relevant and should continue. Method: The method used was qualitative interviews with the actors involved in dental health project. A total of 21 interviews were then consolidated by a qualitative content analysis.

The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.

In the 90's the establishment of external trade centers had a strong growth in Sweden, primarily in large and medium cities. Gradually took smaller towns by this development. In larger cities with larger and growing customer base than in small towns were not affected by the trade centers heavily, but in the smaller towns where the customer base was smaller, there was a risk that it created a negative competitive relationship between external trade center and trade in the citycenter. In some cases, competition is a positive development for both the citycenter and external trade areas, but in some cases there was a risk that the center became impoverished. In such situation there are theories that the different variety of different types of goods should be at the center and in external trade center could lead to a balanced trade relationship.

In preparation for the autumn term in 2011, the Swedish elementary school adopted new syllabuses regarding, inter alia, the civic education (Sw. Samhällskunskap). The civic education has traditionally been a disciplinary subject with a main purpose of mediating democratic values as well as providing generalorientation in the society. Generally, the civic education intends to reflect the world in which people live in, being a complex society which to a large extent is regularly affected by global aspects and developments.      The purpose of this study is to review all the elementary school?s syllabuses relating to the civic education with specific focus on the globalisation perspective.

There are many good reasons to ponder about what it is that makes life worth living. To observe and reflect on what it is that gives a person a good quality of life is arguably the essential core of social-work. The aim of this research was to investigate how 15-year old youths interpret quality of life. The key areas that we explored in order to meet the research aims were: what did the youths interpret as a good quality of life for a 15-year old and for an adult, how did they view their own quality of life, and did they think that the regional context (i.e. if one lives in a big city or in a small town) affects how one interpret quality of life.The studywas based on interviews with four boys and four girls.

Risk-free profit sounds appealing. The opportunity to arbitrage exists. Investments in underpriced IPO:s can generate profit, but for whom?Previous studies have shown that underpricing is a common phenomenon. This study intends to investigate whether underpricing and the arbitrage opportunity exists on Aktietorget which is a smaller venue.

Title: Shop at us ? and we?ll carbon offset! ? How large and well-known companies affect consumers feelings towards their brand by using green marketing and CSR.Authors: Emilie Jäfvert & Carolin RuthbergAdvisor: Christine TidåsenLevel: Bachelor thesis in Marketing, (15 Swedish credits), Spring 2011Keywords: Green marketing, CSR and branding.Question: How do large and well known companies affect their customer?s view towards their brand by using green marketing and CSR?Purpose: The purpose of this thesis is to investigate how high consumer?s value companies who works with green marketing and CSR, and also to find out how it affects the company brand.Method: We have chosen to do a qualitative research with a deductive approach. We have done five open interviews with companies and ten open interviews with consumers to conduct our research.Theoretical framework: Our theoretical framework includes four different areas; CSR- Corporate Social Responsibility, green marketing, brands and consumers. These sub-chapters include theories that will help the reader get a better understanding of the areas.Empirical studies: We have gathered empirical data by multiple open interviews. Two of the five interviews with the companies were face-to-face, two via email and one over the phone.

Syftet med uppsatsen är att diskutera det så kallade equity premium puzzle. Jaganalyserar teoretiskt den intertemporala konsumtionsbaserade CAPM (C-CAPM),sammanställer en del av litteraturdiskussionen som finns på området samt empiriskttestar C-CAPM på svensk data. Fenomenet equity premium puzzle innebär attöveravkastningen på aktier är så stor att det inte stämmer med den ekonomiska teorin.Enligt teorin beror C-CAPMs riskpremie på kovariansen mellan konsumtionen ochaktieavkastningen. Litteraturen visar att forskare inte har lyckats förklara equitypremium puzzle genom att ändra antagandena i grundmodellen. Den empiriskaundersökningen visar att equity premium puzzle även uppkommer på svensk data..

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.

För att installera flera operativsystem samtidigt finns det olika verktyg avsedda för att underlätta denna process. Det finns både kommersiella- och gratisalternativ ute på marknaden. En av de ledande kommersiella replikeringsmjukvarorna är Symantec Ghost. I detta arbete jämförs Symantec Ghosts mot Free open-source ghost (FOG) för att mäta användbarheten med avseende på kritiska attribut. Kritiska attribut är baserade på utförandet av en fullständig replikeringsprocess samt hur en användare upplever hanteringen av mjukvaran.

Information Technology (IT) makes it possible to electronically distribute data between actorswho are in geographically diverse areas. Nowadays, information is sent less frequently throughtraditional correspondence in favor of faster electronic equivalents via the internet.Despite effective IT environmentand secure encryption techniques choose some actors to sendinformation through physical delivery. This phenomenon occurs in those working withconfidential information as it is handled by a number of rules and safety regulations.Based on a set of rules and requirements, we have looked over the possibility of sending sensitiveinformation electronically over the internet. The aim was to find general guidelines for howcompanies and organizations should manage and send sensitive information over insecurenetworks. This led us to our research question: How can information be exchanged betweenactors in geographically diverse areas be categorized and encrypted so that it can be transportedover the internet without security or integrity deficiencies?To answer the question, there was a case study at a defense company.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.