Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

This master thesis was carried out for Saab Avitronics, a business unit of Saab ABactive in electronic systems for military aircrafts. Reliability and weight are of crucialimportance in this environment. To improve reliability and lower the weight graphitemay be used for electronics cooling. Graphite is an anisotropic material and hasthereof high thermal conductivity in two directions (in-plane) and a relatively lowconductivity in the third direction (through thickness).The purpose of this thesis was to investigate if graphite is an adequate thermalconductor to use in PCB carriers. The carriers support and cool the PCB by divertingthe heat dissipation from the PCB components to the edge.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lackof a sauna lightning produced by Tylö. The project of developing a new saunalightning series was assigned two students at the developmentengineeringprogram at Halmstad University. The main problem with lightning in the saunais the heat and security aspect. The selection fell on LED technology as thelightning source, thanks to its small measures and low heat emission.The work of constructing of a lightning armature which the capability of coolingdown the LED lightning was carried out during autumn ?06 and spring ?07.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lack of a sauna lightning produced by Tylö. The project of developing a new sauna lightning series was assigned two students at the developmentengineering program at Halmstad University. The main problem with lightning in the sauna is the heat and security aspect. The selection fell on LED technology as the lightning source, thanks to its small measures and low heat emission. The work of constructing of a lightning armature which the capability of cooling down the LED lightning was carried out during autumn ?06 and spring ?07.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.

The use of bio fuel is increasing every year. Nowadays you will find different alternatives to oil and electricity heating system. In this essay I have examined what the economic conditions are to invest in a bio fuel furnace. I have chosen to assume from a specific farm and do a case study on this farm. Malmvik farm is located just outside of Stockholm.

Promoters are genetic elements that facilitate the transcription of a gene and they have been found in front of non-coding RNA (ncRNA) genes in different organ-isms, e.g. the model plant Arabidopsis thaliana. A similar element, DUSE, has been found in front of ncRNAs in the social amoeba Dictyostelium discoideum and a part of this project has been to analyze the function of this putative promoter element through cloning and expression studies. A construct to analyze the func-tion of DUSE was successfully designed and introduced into D. discoideum but full expression studies were not finished because of shortage of time.

Promoters are genetic elements that facilitate the transcription of a gene and they have been found in front of non-coding RNA (ncRNA) genes in different organ-isms, e.g. the model plant Arabidopsis thaliana. A similar element, DUSE, has been found in front of ncRNAs in the social amoeba Dictyostelium discoideum and a part of this project has been to analyze the function of this putative promoter element through cloning and expression studies. A construct to analyze the func-tion of DUSE was successfully designed and introduced into D. discoideum but full expression studies were not finished because of shortage of time.

Phytoestrogens are secondary metabolites produced by plants. Among the plants that make phytoestrogens are soya, red clover and some types of grass. The name phytoestrogen is a collective term for compounds such as genistein, daidzein, biochanin A and formononetin. These compounds are similar to oestradiol-17? in their chemical structure.

Första januari år 2013 trädde den senaste versionen av MARPOL Annex V i kraft. Denna studie har genom en litteraturstudie samt intervjuer med nautiska befäl sökt svar på vilka förändringar som skedde, hur dem implementerats ombord samt hur förändringarna upplevts av sjöfarare. Syftet med studien var att bidra med en pusselbit till bilden av hur avfallssortering utövas till sjöss samt hur arbetet med det upplevs. Litteraturstudien kom fram till att den stora skillnaden är att papper, glas, metall samt aska inte längre får slängas i havet. Inom specialområde får endast matavfall destruerat genom avfallskvarn slängas överbord.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

The aim of the study was to map the extent of Fe, Cu, Pb, As, Zn and S contamination in the area surrounding the Nasa silver mine. The mine operated between 1635 and 1810 with some prospecting performed in 1889, and has become infamous for the gruesome ways that the indigenous people were treated during the early years of operation. This study tested three hypotheses through a geochemical survey: 1) sulfide oxidation is still active in the abandoned mine, 2) the soil downslope of the mine is contaminated by mine drainage, and 3) the stream downslope of the mine is affected in the same way. All three hypotheses were valid, as the results showed that still, >200 years after mining operations ceased, signs of the historical mining are clearly visible in the surrounding environment. Acidic conditions were discovered in surface waters close to the waste rock piles, which indicates active sulfide oxidation.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.