Many scientists agree that phytoestrogens could have an effect on the reproduction of an animal. The question is now why and what mechanisms that play an important role. This paper has been focusing on the estrus behavior of gilts by use of a behavioral study. Some of the gilts were given additional feed with the phytoestrogen genistein which commonly occurs in the feed as a part of soybean products. Blood samples were collected and analyzed for progesterone and estradiol concentrations.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

In this thesis some different modulation schemes for xDSL-techniques are compared. The investigated techniques are ADSL, G.lite, ADSL2, HDSL, SHDSL and VDSL. The modulation methods used are DMT, CAP and different versions of PAM. Several broadband techniques also use Trellis Coded Modulation (TCM) to increase the coding gain of the transmission. For each one of the different modulation methods the signal-to-noise ratio is calculated for generating a bit error rate probability of 10-7.

This thesis examines the Swedish labour market with a focus on the immigrant part off the population. There are big differences between the immigrant and particular non-European immigrant part off the population and native Swedes. In the first part off this thesis I will show that immigrants in Sweden have a higher rate of unemployment, lower rate off employment, lower wage incomes, higher risk off unemployment and are overrepresented in low skilled, low status jobs. Even when controlling for different factors such as education level, knowledge in the Swedish language, age etc. a big gap remains.

Earlier quantitative entrepreneurial studies with a focus on poverty rate has centred their arguments and analyses entirely on income differences which has resulted in a high poverty rate among self-employed. Their results shows that variables such as age, gender, hours of labour and structure of the household significantly affect the poverty rate among self-employed. In this study we aim the focus on material living standards instead of income differences, thus using a more representative approach while studying entrepreneurial poverty. The purpose of the study was to examine how personality traits (big five) affect the material living standards among the self-employed in Sweden, using a group of employed as a control group. Variables earlier known to affect the poverty risk among self-employed where used as control variables together with education and household income.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.

In the past, the meaning of marriage has been an agreement between two people to live together and have children in a legitimate manner. The marriage was not just to form a couple; it was also to merge two families together. From the early 1900s until today the allegation of marriage and its influence got a significant change compared to early societies which have aroused my interest to perform this into a research paper. My study is focused on marriage and social changes during the 1900s. Thoughts that arise now is that why there was a remarkable change in the marriage rate during the 1900s and whether there were any social changes had to do something with it.

The translation of financial records of foreign subsidiaries gives rise to currency translation adjustments that affect total group equity. If unwanted, fluctuations in translation adjustments can be avoided using net investment hedges. This study aims to find the extent of net investment hedging in Sweden today and in a short historical perspective, and find explanations to varying levels of hedging and firms' decisions to hedge. Based on annual reports, we determine Swedish firms' net investment hedging policies and their level of hedging. The 32 largest companies listed on the Stockholm stock exchange in the years 1993, 2004, 2006, and 2009 are studied.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

Purpose:Only 60 percent of the newly started companies survive their three first years. The purpose of this report is to obtain a deeper understanding regarding how newly started companies work with their positioning and if there are some kind of a relationship between positioning and the survival rate of newly started companies.Research questions:Do newly started companies know what position is? Do they incorporate positioning in their day to day marketing?Approach:We have used a hypothetical-deductive way of reasoning and a qualitative study to gather the information needed. We have through interviews asked our questions to six newly started companies in three different cities.Findings:In our essay, we reached the conclusion that newly started companies do not spend sufficient time or energy on positioning their products. The companies interviewed only market their product as a good product.

Milkability or ease of milking, has higher importance today for Swedish dairy cattle producers after the introduction of milking parlours and automatic milking systems. Milkability is the cow?s ability to quickly milk out and be completely milked. There are several measures of milkability available. Today the farmer measures the traits subjectively in relation to the conformation scoring of the cow 30-270 days after her first calving.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

In a historical view, house prices have developed at the same rate as inflation. In the end of the 20th century the prices on the housing market started to differ from the inflation rate, and today the deviation is strong and the real price increase has been very strong.The financial crisis in 2008, which was a result of a subprime mortgage crisis on the American real estate market, has made several agents on the housing market in Sweden question today?s prices. Robert Schiller, an American economist who predicted the mortgage crisis in 2008, claimed during the Nobel Prize ceremony 2013, that Sweden shows signs of a financial bubble ? "I think that people here in Sweden have an illusion that increasing prices is a lasting trend, but that is more suggestive of a bubble".

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and Utilization rate is calculated.