In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.

The Northern Raccoon (Procyon lotor) belongs to the Carnivore-family and is a species endemic to North America. Every year hundreds of orphaned raccoon cubs are admitted into the Wildlife Rehabilitation Center of Minnesota (WRCM), a non-profit organization where all injured or orphaned wild animals are admitted and receive quality health care with the goal of being released out into the wild. The WRCM routinely vaccinate all of the admitted raccoon cubs with a killed feline panleucopenia vaccine, but despite this there are outbreaks of parvovirus infection every year where up to 50% of the admitted cubs have been euthanized or died. The objective of this study was to determine whether vaccinating the admitted raccoon kits has any significant protective effect to developing clinical parvoviral disease. A single-blinded cohort study was designed with two parallel, independent groups. One group was given a dose of killed feline parvovirus vaccine at admission, and the other group was not given any vaccination at all. Assignment to the vaccinated or unvaccinated group was on a per-litter basis and done randomly by drawing lots out of a box.

The purpose of this master thesis is to study the correlation and meaning of current ideas and practice at the public library of Gothenburg. This was done by comparing the visions and ideas expressed by the library through the library plan, with how the daily practice looks. For the theoretical framework organizational theory is used and research data was collected both from public documents and through observations. The public library of Gothenburg were chosen for the study because of it's newly renovated facilities. The idea is that these facilities make a suitable study object of the current ideas and priorities of the public Swedish library in general.The results show that the public library practice in Sweden still rests on the original public library ideas such as offering information for free and treating every user as equal.

Initiativet till projektet togs av tandvårdspersonal på Specialisttandvården i Halmstad då de upplevde problem vid arbete med oral protetik. Problemet, som projektet även bygger på, innebär att komponenter tappas och på grund av gravitationen samt patientens position riskeras att inhaleras eller sväljas. Detta innebär ett stress- och orosmoment, vilket bidrar till en försämrad psykosocial arbetsmiljö för tandvårdspersonalen. 2008 infördes det statliga tandvårdsstödet i Sverige vilket innebär en reducerad kostnad för protetikingrepp som lett till att fler har råd med oral protetik. Därför blir problemet mer och mer utbrett, vilket gjort kravet på en lösning mer eftertraktad. I projektet har dynamisk produktutveckling tillämpats med stort fokus på involvering av framtida användare. Artikelsökning, observation och enkätundersökning i genomförd produktdefinitionsfas lade grunden till projektet.

I denna rapport presenteras hur en simulatorlösning för funktionstestning av en gruvmaskin har tagits fram. Arbetet har skett i Atlas Copcos regi och består av tre delar: kartläggning i form av intervjuer, utvärdering av befintliga simulatoralternativ och slutligen val och implementation av lösning. Resultatet visar på en konceptuell prototyp, där en gruvmaskin visualiseras i en 3D-miljö tillsammans med en virtuell gruvgång. Detta möjliggör bland annat testning av autonom navigering, alltså att en gruvmaskin självständigt styr utifrån avläsning av tunnelväggar med hjälp av laser. Samtidigt tillåter lösningen också att kontrollvärden från olika sensorer, såsom vinkelgivare, kan hämtas ut ur simuleringen..

This essay investigates the statements of Växjö municipality?s motives for some of its many environmental projects. The aim of the essay is to be theory-testing as to see how a municipality/city which promotes itself as being ?green? motivates its efforts in the environmental area. Växjö city promotes itself as ?The greenest city in Europe?, an award appointed to the city by BBC and other international media.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Vår uppgift har varit att skapa ett grafiskt användargränssnitt till en pick and place maskin eftersom den ursprungliga programvaran inte fungerade på ett tillfredsställande sätt. Programmet är implementerat med C++ som programmeringsspråk och är designad på ett sådant sätt att vidareutveckling kan ske om så behövs. Programmet är begränsat till att användas tillsammans med tidigare utvecklad programvara för denna maskin. Rapporten beskriver det grafiska användargränssnittets delar, både hur de fungerar och hur de är implementerade..

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

 By changing focus from the active blogger to the ex-blogger this study focuses on a part of the blogosphere that is generally overlooked, why bloggers stop blogging. 30 terminated blogs where studied and the ex-bloggers where contacted. Six main reasons why a blog is terminated was found: Changed life situation, The blog effecting private life, The blog effecting the professional life, Done with testing to blog, Blogging about an event, Done with the blog ? the logical termination. Outside the main focus of the study  it was also evident that most bloggers terminate a blog to put focus of one of their other blogs or start a new one.

In order to decrease the disturbance from a cable testing equipment, the company Ericsson Network Technologies in Falun determined to design a new series resonant test system with a lower frequency. The new equipment is of series resonant type with a system frequency of 500 Hz. This equipment consists of an inductor, a capacitor and a voltage source. The voltage source is the same as the old one, the cable acts as the capacitor but the inductor has to be designed especially for the new equipment. In this thesis work several air coil inductor types were examined.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

In the electronic industrials, power control of AC motors is commonly used. For example power control of a washing machine motor, a vacuum cleaner motor or a coffee machine motor. The company Rejlers Ingenjörer AB has many projects where power control of AC motors is included. A prototype card for this task can save time and money for the company in the future and this is the reason for this thesis.The motors are power controlled by a TRIAC and control of the trigging pulses to the TRIAC. This card is modularly built and can easily be adapted for future projects where the power control of AC motors are included.The prototype card can be used as a subsystem in a larger electronics projects or as it is in lab environment for testing and evaluating new motors..

With increasing energy prices and increased focus on the environment we saw the need for companies to get control over their energy use and their emission of carbon dioxid. An analysis tool that integrates both these areas is, with our knowledge, not available on the market today. Therefore, our project became to develop such a tool.By doing this degree project we would like to clarify that energy consumption and environmental impact are integrated. The less energy consumed by today?s society the smaller the environmental impact will be.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..