A bioslurry reactor was built for the bioremediation of TNT contaminated waste from the demilitarization industry. The field test was conducted at Vingåkersverken in Vingåker, Sweden, to see if results from laboratory studies could be repeated in a full scale reactor. The goal of the project was to optimize the reactor to such a degree that it could be used to handle the waste produced at Vingåkersverken and also that this technique could be applied for remediation of contaminated soils. Unfortunately the samples taken during the full scale field test were destroyed by the shipping company and no analysis was possible. A later attempt by the Biorex research group has also been unsuccessful to reduce the amount of TNT using the bioreactor.

This thesis presents the question of a possible breakthrough for mobile payment solutions in Sweden. The way payments are made and the way cash is being used in the society is changing. To be accepted as an alternative method, if cash isn't king anymore, the new technology will have to acquire user acceptance. In this thesis a case study of Swish, a mobile payment solution for P2P-payments, is presented. The focus of the study is customer value and technology acceptance of the service.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

33 referendum has taken place in european states regarding the European Union since the fall of the Berlin wall. This thesis aims to initialy identify potential patterns in this group of referenda to launch and test a theory/hypothesis anchored in this pattern.The european states are differing in nature and the standard of living is chosen as the factor that can potentially have affected the outcome of the referenda held. The carrying thought here being that the voters in states with considerably lower standard of living than the european average would have a more positive attitude towards a deepened cooperation among european states.To try this connection between standard of living and how european citizens have placed their votes a main and principal quantitative test is undertaken. It is followed by discussion and arguments about the result of the test.The argumentation goes from being hopefull of the strenght of the hypothesis, to a more ciritical view of its' strength. The thesis is wrapped up in some argumentation about how and why it fails to explain what it was initially intended to do.

The main subject with this master thesis is to take a closer look at university libraries specially Gothenburg University Librarys operation of marketing the librarys user contact, how it receives various users demands and carry out the interactive and strategic marketing. Marketing is planning, structuring, implementation, analysis and controls of carefully formulated programs, designed to bring voluntary interactions and relations with the target markets, for the purpose of achieving organisational and user satisfaction objectives. The structure of this thesis covers three main parts. Part I reflects the researchers approach to the subject. Marketing researchers such as Grönroos, Kotler, Bryson, De Sáez and Gummesson among others are presented.

Jag kommer i denna uppsats beskriva den designprocess som pågått vid skapandet av en webbaserad informationsplattform från koncept till slutprodukt.Mitt uppdrag har varit att effektivisera en webbyrås nuvarande sätt att hantera och sprida information på, som bestod av en blandning mellan digital och analog information, och skapa en ny webbaserad informationsplattform. Den nya webbaserade informationsplattformen ska kunna samla all information på en plats och skapa ett effektivare informationsutbyte mellan de anställda på företaget.Jag har använt mig av två teoretiska ramverk; Nielsens tio heuristics samt Krugs visuella design hierarki.Jag har arbetat nära beställaren för att kunna skräddarsy webbplatsen till deras behov.Resultatet efter ett omfattande arbete med designmallar och front-end kodning blev grunden för webbyråns webbaserade informationsplattform, utvecklad för att effektivisera spridningen av information på företaget..

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

Bakgrund: Unilateral benträning är ett relativt outforskat område inom träningsvetenskapen. Traditionellt genomförs fysträning för intermittenta idrotter bilateralt, trots att idrottens rörelser sker unilateralt. Det finns många studier som behandlar samband mellan agility och effektutveckling, men få som har undersökt skillnaden mellan unilateral och bilateral effektutveckling sett till agility.Syfte: Syftet med denna studie var att undersöka om unilateral effektutveckling har en starkare korrelation med agility än vad bilateral effektutveckling och agility har hos kvinnliga fotbollsspelare i division 2.Metod: Kvinnliga fotbollsspelare (n=13, ålder 23 ± 4 år) utförde vertikalhopp med tilläggsbelastning på båda benen, vänster ben och höger ben på 20 kg, 30 kg, 40 kg samt för båda benen på 50 kg och T-test och Pro agility test. Effektutveckling i förhållande till kroppsvikten på båda benen (PBbw), vänster ben (PVbw) och höger ben (PHbw) analyserades och korrelerades sedan mot T-test (Ttest) och Pro agility test (Proagility).Resultat: Signifikanta korrelationer hittades mellan agility och både vänster unilateral (PVbw-Ttest, r = -0,578) och bilateral (PBbw-Ttest, r = -0,741; PBbw-Proagility, r = -0,555) effektutveckling, där korrelationen bilateralt var starkast. Ingen signifikant korrelation hittades mellan höger ben och agility.Konklusion: Bilateral effektutveckling hade en starkare korrelation med agility än vad unilateral effektutveckling och agility hade hos kvinnliga fotbollsspelare i division 2..

Feedback tools support electricity users within the Swedish residential sector to increase their knowledge of electricity and the electricity market as well as to become more aware of their electricity consumption, which in turn encourages a reduction and an increased flexibility of electricity use. The primary aim of this study is to identify and analyse how existing feedback tools can be improved, to ensure that they contribute efficiently to the achievement of the EU objectives congruent with a more sustainable energy system in 2030, emphasizing: greenhouse gas reduction, increased energy efficiency and an increased share of renewable energy. In order to reach the primary aim of this study, existing feedback tools have been identified and mapped and interviews with feedback tools providers have been conducted. The study is limited to three research areas: the practical functions of feedback tools, available technology and the use of feedback tools.The use of more efficient feedback tools will provide an increased success rate for energy management, which includes both behavioural changes and energy efficiency. According to the results from the interviews conducted for this study, an increased use and user frequency is important to utilise the energy management potential.

Något av det svåraste som kan drabba oss är när en vän, familjemedlem eller släkting går bort eller drabbas av en sjukdom. Döden är en naturlig del av livet, men känns detta till trots jobbig eller rent av orättvis då den slår till. I de flesta fall är döden även resultatet av en sjukdom, en sjukdom som med dagens kunskap kanske hade varit möjlig att undvika. Eftersom döden i många fall har varit lite av ett mysterium genom människans historia har vi också lärt oss att rädas den. Nu, när den tekniska utvecklingen öppnar nya dörrar för att i förväg göra riskbedömningar av möjliga sjukdomar som kan drabba individen, så drar sig många undan.

The aim of this Master?s thesis is to survey what personal encounter at the library can signify, and to examine Swedish public libraries? policies for personal encounter. The posed questions are: What does personal encounter at the library signify? How are users and library staff represented in the collected policies? What do the policies say about digital encounter? 290 e-mail queries were sent to Swedish public libraries in May 2010. Of 140 responses, 107 stated that they did not have a written policy on personal encounter.

A significant amount of a teacher?s work consists of evaluation and marking of the students, which involves a great responsibility. This essay put the teacher?s evaluation of the students in focus. Today?s course Idrott och hälsa A, at the upper secondary school level, consists of 100 points and all students take this course apart from students attending apprentice programs.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This essay is a survey of thirteen user studies performed in the field of image retrieval. The purpose is to try to distinguish principles that should be kept in mind when wanting to make image databases available for a wide and varied group of users. The essay tries to answer two questions, namely: Are there any results in accordance among the different studies? What in the user studies should be considered when it comes to how content description, interface and functions for searching can be designed when creating systems for image retrieval? Each study is first reviewed on its own, and then a comparative analysis of all the studies is carried out. Derived from the result of this analysis, the conclusion is presented in the form of a row of suggestions to which aspects are to be suitably included in the design of image databases.