The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This study was made to see too what extent Swedes uses consumptive resources such as berries and mushrooms, game meat and meat from fish in their household on a yearly basis. I have also looked into the difference between rural and urban areas in Sweden. Further aim was to determine what factors that correlates with the participation in berry and mushroom picking and the use of game and fish meat within the household. The study was conducted in form of a mail survey that was sent to randomly chosen persons in every municipality in the six northern most counties in Sweden and in the county of Stockholm. In addition a sample was sent to randomly chosen persons on a national level.The results showed there is a difference in use between rural and urban areas in Sweden in all 4 investigated consumptive resources.

Due to the increase of the emission of greenhouse gas and climate changes more and more customers demand environmentally sustainable products. The increased demand of sustainable products from cradle to grave is something that has affected the food sector. Many retailers within the food sector feel that they are less or more forced to be environmentally friendly. Nowadays many retailers have chosen to show customers and stakeholders that they want to ?do good? by publishing annual sustainability reports. The Swedish food market has been one of many markets investing in being environmentally friendly.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

En omprogrammering av Kvarteret Domherren från dagens slutna byggnad med sin arkitekturskoleverksamhet, till ett levande kvarter med studentbostäder, arbetsplatser och offentlig verksamhet, vilken bedrivs av de studenter som bebor platsen. Den offentliga verksamheten domineras av en stor publik parkyta, vilken bryggar an mot den befintliga byggnaden. Under denna finns stora utställningshallar, café/bar och butik. Utställningarna kommer främst uppifrån de studenter och forskare som verkar uppe på KTH campus, och blir en publik brygga mellan campusområdet och allmänheten vilken bidrar till inblick, inspiration och förståelse av de spännande arbeten och projekt som bedrivs där. Denna plats blir på så sätt ett tillskott tyill staden både lokalt och i ett större sammanhang..

Barnoveraller är ett specifikt område inom klädesbranschen. Det ligger lång produktutveckling bakom, som har pågår under ett flertal år, vilket har förbättrat slutprodukten vad det gäller material, beläggningar och sömnadstyper.I B-uppsatsen finner du lättare materialinformation, konstruktionsinformation, nationella samt internationella standarder, krav ställda ifrån tre olika företag och utav ?barnoverallskunden?. Det här samarbetet blir vårt försök att bidra till barnoverallsmarknaden.Vi har utgått ifrån vår referens, ett privatägt barnklädesföretag från Bollebygd, Sverige.1 De har gett oss möjlighet att få vara med i produktutvecklingsprocessen och leta förbättringar som kan gynna slutprodukten och 2bseen som företag. Det har också gett oss möjlighet att skänka något litet (en sammanställning) som kan användas av fler företag i liknande bransch och situation.2bseen önskade sig ett samarbete där vår roll skulle innebära en fortsatt produktutveckling på befintliga produkter som i produktion fått ett och annat fel.Childrens clothing is a particular area of clothing business.

The last decades the increased computerisation at the places of work has led to new physical loads in the working life and new demands on the working environment. The widespread usage of computers in the working life has led to more sedentary work and less daily movement.The purpose of the thesis is to develop a new product to a concept that in a low intensive and healthy promotional way will activate the body. The product will make a combination of healthy promotion activity and work during office hours possible and primary aims to those with a sedentary office work, which leads to that the body don´t get to be activated in the extent needed.Information has been gathered from studies already made in this area, interviews plus a study and an experiment. From the gathered information concepts and functional solutions has been generated and evaluated to result in a product concept.The thesis has resulted in a concept that consists of a work place unit where the user walks on a treadmill and works at the same time.A general conclusion which can be drawn is that the majority of persons that tested to walk and simultaneously work with a computor on the treadmill found this way of working attractive. Many were positively surprised and said that they would use such an physically activating work place implement if it was available at their place of work..

I dagens samhälle kretsar shopping inte bara kring själva produkterna som säljs, utan även om hur butiksmiljön är uppbyggd. Den visuella miljön och hur produkter presenteras har stor påverkan på kunders beteende och inköp. Ljus, ljud och färger påverkar våra sinnen både positivt och negativt, vilket butiker utnyttjar på olika sätt. Syftet med detta uppsatsarbete är att beskriva vad unga kunder (18-25 år) anser ska ingå i ett attraktivt och starkt butikskoncept. Syftet är också att undersöka hur unga kunder upplever likheter respektive skillnader gällande butikskoncept för butikskedjor och produktutvecklande varumärkesleverantörer.

The Swedish forestry aims primarily maximize production and economical wins. However, especially urban forests have great qualities as space for recreation and children?s play, which means that other goals should lead the forests management. The Teleborg forest is a wooded area in Växjö, surrounded by urban dwellings, schools, nurseries etc. A great part of the forest was wind felled during the storm Gudrun in 2005 which changed the forest, earlier dominated by spruce, dramatically.

Involving prospective users in a development process is important. This makes it easier to make a more usable product. This thesis is about developing an intranet targeting a school and focus is aimed towards intranet usability.The reader is given knowledge into how to design and implement an intranet using persona. Design and develop by using persona is difficult when there is a group with large variety of knowledge, age and technology interest, so as in this case. Persona although always helps during the development phase because of the strong links to the personas that are created, which gives developers a constant reminder of the end users of the system.The thesis describes how information is collected and processed.

GCM is a product information management system which handles data for consumer packaged goods. GCM was developed during the middle of the nineties and was acquired by Prevas AB in 2004. The GCM application relies on the services provided by the organization GS1, which supplies global specifications and validations for trade items across several sectors. GCM is updated regularly due to the frequent changes in specifications from GS1. However, the overall graphical user interface design has not been redesigned during these years.This dissertation studies possible improvements for the webpage that handles product data in GCM.

Nordic Marine Sauna AB has, since 2005, designed, manufactured and sold floating saunas. Theproduct are characterised by a well thought thru and appealing design and its high quality. Thecompany is now intending to open a new business area by starting a subsidiary, NordicSubmarine Sauna AB, which will design submerged saunas. The expected customers are leisureand conference centres as well as customers that seek an experience out of the ordinary.Due to the products technical complexity a master thesis was adverted. The task was to do aninvestigation whether such a product is technically viable.The job involved research of existing products and constructions material as well as designingthe product with CAD and FEM-programs.

The vegetable production in Sweden is concentrated to the very southern parts of the country. This is also were the major wholesalers are located. In recent years, there has been an extreme focus on price on the food market. As there are only a few big wholesalers and also very few food retail chains, these have a great impact on the producers. The pressure from prominent vegetable-producing countries, providing low price products, such as the Netherlands and Spain is strong.

It is important for firms to continually develop their offerings as the business landscape develops in order to sustain their competitiveness (e.g. Schumpeter, 1934; Ansoff, 1979; Porter, 1985; Trott, 2012). In a context of globalization, rapid technology development and changing customer needs, the paper packaging industry is urged to enhance its product development activities (Hansen & Niskanen, 2007; Björkdahl & Börjesson, 2011). However, there is little research about paper packaging firms? product development processes (ibid).