Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This critical examination of the concept of cultural heritage is based on an overall phenomenological approach, with focus on Alfred Schütz?s further development of Edmund Husserl?s idea of the lifeworld. With strong emphasis on the subjective and intersubjective dimensions, the concept of cultural heritage is contextualized, analysed and criticized from different aspects for the purpose of enriching the discourse of cultural heritage.A literature based methodology is used, including a hermeneutic analysis of theoretical texts in the field of cultural heritage studies and the new Swedish Culture Environmental Law (?Kulturmiljölagen?) and related bills. Qualitative interviews deal with people?s notions about the concepts of culture, cultural heritage and intangible cultural heritage.

This report is a bachelor's thesis of two students from the Energy and Environment degree at KTH Stockholm. Grinda is an island situated Stockholm archipelago. Skärgårdsstiftelsen is landowners and manages the area. Grinda Wärdshus, a guest house located in the island, currently uses an oil-fired boiler as a heating system. The aim of this thesis is to investigate whether wood chips or pellets is, from a sustainability standpoint, a suitable heating method for the guest house.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

AbstractAccording to 3 § in the Equal Opportunities Act should employer fulfil their commitment to their employees and work targeted for the equality in working life. In the report we account for 3?11 §§ Equal Opportunities Act, in purpose to show employer obligations to work actively work for equality between the sexes. This is the main focus of the article and the answer to one of our issue of law. We have also written about how equality work and how the Equal Opportunities Act has grown up, how it work in today?s society and the thoughts about the future.The growth of equality work, the Equal Opportunities Act and a short history are partially written from European law, the Swedish government official reports and in government bills.

Purpose: Corporations today see a greater responsibility towards society regarding the environmental impact of their actions, using available transportation options that are more eco-friendly can reduce this impact significantly. Martinsen and Björklund (2012) identifies a set of gaps between supply and demand of green logistics services. This paper aims to address what it is that affects the demand for these alternative solutions and what could be done to increase the usage of them, thereby decreasing this gap.Design/methodology/approach: A quantitative study with six Logistics Service Providers (LSP) and 24 companies that purchase transportation services, all operating in Sweden. Data is collected through semi-structured telephone interviews with people responsible for the purchasing of transports as well as key account managers within the service providing companies.Findings: Just as the LSP?s interviewed in this paper thought, the main focus of the transport buying companies are the costs.

Powder Metal (PM) gears are machine element components which operate under the same principle as conventional gears, but, due to their intrinsic material characteristic need to be designed slightly different, and its manufacturing process offers advantages previously unobtainable by conventional steel gear manufacturing methods. The use of PM in similar applications, such as synchronous hubs, makes them a suitable candidate for production in such material. The current master thesis work focuses on gear design using PM by utilizing finite element method (FEM) to reduce weight and inertia taking into account root bending strength and tooth deflection.First a topological optimization is used to determine feasible candidates for different web designs which have as objective to reduce volume, similar topologies were shown during different loading conditions; and hence, this topology was chosen as a suitable candidate. A shape optimization of the topological candidate was performed having as state variables root bending strength, independent for compressive and tensile side of the tooth loading; and tooth deflection, which in concept can be correlated to static transmission error (TE).Another aspect in this thesis analysed is the possibility to incorporate non-trochoid root geometry, a trochoid root is always present when machining with a hob, into the gear root and hence reduce the stress concentration here. Due to the use of PM, a non-symmetric optimized root can be achieved and hence be optimizing compression and tension.Results showed significantly lower inertia, for example certain results showed 40% reduced when compared to solid gear, with adverse effects as increase in tooth deformation and increase in maximum principal stress.

The association between disclosure level and asymmetric information is a matter of importance andconsiderable interest to the financial reporting community. The theory in this area suggests that acommitment by a firm to increased levels of disclosure should lower the information asymmetry thuslowering the cost of equity. This theory may be compelling, but so far the empirical results have beenambiguous. Due to increased globalization the demand for high quality accounting standards has risen. In2005 The International Accounting Standard Board launched the standard named IFRS 3.

On the first January 2009 the official animal welfare control were transferred from the municipalities to the County Administrative board. With this transition, some changes occurred for those who work as animal welfare inspectors. The aim for this study was to examine farmers' view on the transition between the municipalities and County Administrative board, in order to compare the two authorities. I have also studied the farmers view about animal welfare inspectors' knowledge, both theoretical and practical. The questionnaire also included questions about farmers' view on animal welfare legislation.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Traditionally risk-based measures have been used to assess animal welfare in legislation and certification schemes. With increased knowledge and research, debate today tends to focus on and advocate the use of animal-based measures. However this is not a panacea for welfare and the most sound conclusion should be that assessment of animal welfare needs both. The aim of this thesis is to identify the points that need to be taken into consideration to find the optimal balance in the use of input and outcome measures according to the aim of the assessment and how these should be applied when designing a certification scheme? To answer this, a comparison of the use of resource-based, management-based and animal-based measures in two certification schemes for dairy cow welfare, Freedom Food (UK) and Svenskt Sigill (SWE), was made.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

AbstractThe purpose of this study is to examine how Greece?s migration system functions and how immigration and asylum policies manifest themselves during the countries current severe economic crisis. More precisely, examining how the regulatory framework and policies regarding refugees' and migrant situation effects practical implementation. The research questions raised are; - How are refugees and other migrants' rights in Greece respected, from a legal, political and moral perspective? What impact can racism have on the treatment of refugees and other migrants? A contextual analysis of ideas through an analysis of the political programs/agendas was used and contrasted, through theories concerning racism, nationalism and globalization to further nuance the situation concerning refugees' rights.

The starting point of this paper has to do with rapid changes within the information technology and the need for agile and fast systems. The primary goal is to investigate what happens with recordkeeping practices in agile environments like service oriented architecture (SOA). It is in the possible transfer between IT architecture and digital archive the area of this paper resides. The paper relates to the Records Continuum model by which records will be considered historical and active at the time of creation. In the Records Continuum model recordkeeping practices and archival requirements will have to be taken into account at the time of creation.This paper concerns SOA from the perspective of Archival and Information science.