This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

Denna uppsats syfte är att ta reda på om euron är en internationell valuta och omeuron kan konkurrera med dollarn om titeln som världens ledande valuta. Teori omvalutamarknaden, en valutas uppgifter och vad som avgör vilken valuta som användsinternationellt behandlas och för att kunna svara på uppsatsens frågeställningar (syfte)redogörs siffror på eurons internationella användning. Sådana siffror visar att euron ären internationell valuta då den används i valutans funktioner internationellt, men attdollarn fortfarande är den världsledande valutan utan att vara särsklit hotad i sinställning av euron..

Denna uppsats redovisar en kvalitativ textanalys av nyhetsrapporteringen om kemattacken utanför Syriens huvudstad Damaskus i tre engelskspråkiga tidningar i USA, Ryssland och Libanon. Studien jämför nyhetsrapportering i The New York Times (USA), The Moscow Times (Ryssland) och The Daily Star Lebanon (Libanon). Underlaget för studien är material publicerat under tre perioder och består sammantaget av 35 artiklar.. Den första perioden utspelar sig de första två dagarna efter kemattacken i Damaskus förorter. Andra perioden utspelar sig dagen före och efter att Syriens regim pekas ut som ansvarig av USA:s utrikesminister.

C-uppsats kandidat 2011Title: Media ? terroristens medhjälpare? Författare: Christoffer WiklöwSpråk: svenskaInstution: JMK, Stockholm Universitet En kvalitativ studie om New York Times språkbruk kring terrorism. De valda frågeställningarna blev:Hur är New York Times språkbruk kring terrorism och 9/11 2001, respektive 2011? Hur har mass-mediated terrorism-diskursen förändrats mellan året 2001 och året 2011 i New York Times nyhetsartiklar om terrorism och 9/11? Hur ser en reporter på sin roll som skribent om 9/11, och hur kommer detta att indikera på att journalisten kanske faller offer för att vara terroristens medhjälpare?Och materialet för studien blev fyra artiklar från New York Times, och en intervju med en skribent bakom en av artiklarna. Teorival blev en kritisk teori-inriktad del med en socialkonstruktionisktisk infallsvinkel som stöd. Birgitte L.

Studien utgick från de vetenskapliga frågeställningarna: ?Hur yttrade sig klimatskepticism i Dagens Nyheter, Verdens Gang, The Times och The New York Times under perioden 1:a januari till 30:e juni år 2010?? och ?Hur skiljde sig rapporteringen mellan dessa tidningar?? För att kunna svara på dessa frågor användes gestaltningsteori och kvalitativ metod. Med kvalitativa textanalyser samt gestaltningsanalys undersöktes hur tre olika gestaltningar yttrade sig i fyra ledare och fyra reportage. De gestaltningar som studien baserades på var ?vetenskaplig osäkerhetsgestaltning?, ?tvetydighetsgestaltning? och ?ekonomisk gestaltning? som alla i tidigare forskning har gått att koppla till klimatskepticism.

Kitron had wishes to be able to test and measure how disturbance affects their vehicle electronic units before they have been verified by SP Technical Research Institute of Sweden in Borås. This work started with the writing of a demand specification together with Kitron for a product PSQS, Power Supply Quality Simulator, which can generate some test pulses according to a standard for electronic units to Volvos vehicles. A design proposal was developed with the help the demand specification and was verified with the help of simulations. All electric schematics was designed with the guide of the design proposal. The pulses realized in the works of this thesis are those which Kitron experienced that they have a need to test in their own premises and which are possible to generate with the means available.

This study was conducted at Glimek AB, a company that has chosen to decentralize its central storage unit in order to increase production efficiencies. The purpose of the study was to identify the problems in the production cycle that lead to the decision to decentralize the central storage unit, as well as identifying what the decentralization entails. The effects of the decentralization have not been analyzed in the study, and consequently neither financial nor production disadvantages have been considered.Appropriate questions were formulated based on the chosen underlying theories, and were asked to selected individuals with relevant knowledge. The study is based on the information that was gathered from interviews with management as well as staff within the company. In addition, supporting information such as flowcharts, drawings, orders and decision support documents were supplied by the company.

This study is based on interviews with five unit managers working in the functional disabilities business. The purpose of this paper is to examine how these unit managers see their roles and their leadership, and to give the reader an insight into what it might entail to be a manager in social work. Theories applied are the role theory and three leadership theories. The previous research this study made ??use of affects ?leadership in social work" and "manager's role and leadership style."Being a unit manager of the functional disabilities business means having a so-called middle management position, which entails expectations being directed upon them from various avenues.

Our aim with this study is to explore socialworkers perception of what is a good treatment is and how to establish good relationship with their clients. We have decided to limit our study with social workers in Economic assistance and Abuse Units in social servises and explore if we can discern any differences between the units. We have chosen to use qualitative methods to achieve the aim of this study. We interviewed a total of seven social workers, of which three were from Abuse unit and four were from Economic assistance unit. One of the theoretical frame we have used is Goffmans (1970, 1974) theories about social interaction in which he explains the social encounter between social workers and clients.

The purpose of the study is to examine different situations and behaviors for students diagnosed with AD / HD and see if there are times where their diagnosis will be extra visible. This will ultimately see how and where these children may need support in their daily lives, and about the support they receive is relevant to their needs. Questions I intend to examine: Are there situations for students throughout the school day in which ADHD diagnosis becomes extra visible? If so, what situations? How is the diagnosis in these situations?It is estimated that about 3-6 percent of school children have AD/HD. It causes difficulties with concentration as well as impulse and activity control.

When a car owner want to lock or unlock his or her car today, it?s preferable done by using aremote control. The system is really comfortable when the car owner is using the remote.A problem arises if a thief gets the remote.The thief doesn?t have to know where the car is parked, an approximate estimation where thecar is parked is enough.For instance, it?s enough to know which car park the car is parked in. If the thief knows that,he/she can repeatedly activate the remote control while looking for a car indicating with lightsand sounds.Because of the fact that a car usually indicates that it has been unlocked by making a shortsound indication, there will be no problem finding the car.The purpose with this project is to make a prototype which makes it harder for a thief to findthe car.

During late autumn/winter in the years of 2005/2006 and 2006/2007 a questionnaire study was made in Västra Götaland county in the south west of Sweden. Inspectors responsible of animal welfare answered the questionnaires during their routine visits to different horse stables in the county. The questionnaires contained questions about the number of horses at the farm, hoof condition, body condition, how often the horses were fed outside and the pasture condition. The purpose of this study was to investigate if a connection could be seen between environmental factors and health factors within the horses in this material. The connections that were analysed were between; hoof health and pasture condition, how many times the horses were fed outside and the body condition and between the number of horses in the pasture and pasture condition.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.