With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

The issue about how Scania shall perform HVAC tests in the climatic wind tunnel CD7, which Scania is about to complete by year 2013, has resulted in four test methods for truck HVAC and also a test method structure. The test methods have been chosen to focus on sun, snow and rain simulations. These are adapted and developed according to what should be tested and to what can be tested in CD7, which has been the object. With CD7 different climates can be simulated in a controlled environment for complete truck level, from desert with high sun load to arctic cold and snow.The test methods represents a basis to start from, for designers and test engineers which make the testing more repetitive as well as time eventually can be saved. Before the test methods can be applied they must be verified as they are based on theoretical and empirical assumptions.

Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

There are two species of potato cyst nematode (PCN), the yellow, Globodera rostochiensis, and the white, Globodera pallida. Each of them can appear in different pathotypes. These are separated by testing the nematode ability to multiply on a number of potato cultivars with different resistance properties. The aim of this project was to examine the virulence of Swedish and foreign PCN populations and to compare two test methods. Biotests are today the only available tests used to study virulence.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

The aim of this master's thesis is a comparative study on units for civic information in Göteborg. The study is based on a project currently in progress at the main public library in Göteborg. It is observed that according to the library's mission statement the library aims to become the most competent intermediary of civic information in Göteborg. This statement suggests a competitive strategy towards other intermediaries of civic information. The mission statement does, however, also state that their goal is to be obtained in cooperation with other intermediaries.

The purpose of this essay is to examine which factors that influence the design of internal control in municipal context and how well it works. We choose seven municipals, where we interviewed the administrative managers, the chairmen of the committees and two persons of the staff in each activity unit. The interviews were performed by telephone, due to the keeping of the essay?s timeframe.The theory in our essay comprises eight hypotheses. These hypotheses were operationalised into different variables aiming to make statistical tests possible.

This thesis focuses on the testing activities at the stages of development and change regardingintegration brokers. The study aimed to examine the overall challenges that exist regarding thetesting activities within this context, and the thoughts towards the development method testdrivendevelopment (TDD). TDD emphasizes high level of test coverage and where the testprocess is well integrated with the development process. To seek answers to our question weapplied qualitative interviews with companies and respondents to try to understand the globalchallenges that are related to this work and processes. The main conclusions presented in thisstudy is that the overall challenges are involving and educating project participants in the testingprocess activities and the contributory effect test have on the end product.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

This master thesis has been done at Enea Epact AB. The purpose of this thesis is to develop and implement a Link Quality Control algorithm for GPRS/EPGRS in the current testing tool. A Link Quality Control (LQC) shall take quality values from mobile stations and base stations and decide a codingsscheme that opimizes the throughput of data. The Advantage with LQC is that it adapts the used coding scheme to the channel quality. If the channel quality is too bad for the used coding scheme, a slower coding scheme with more redundancy should be selected.

AbstractBackground: Becoming a parent to a child in need of Neonatal Intensive Care can be a traumatic experience. During a time when the parents may need support, guidance and a sense of control ? the family might need to relocate to a hospital away from home if the child needs highly specialized medical care at a Neonatal Intensive Care Unit. Aim: The aim of this study is to investigate the parents? experience of having to change neonatal care unit.

To get an optimal print result with rotogravure on improved newsprint, MF-paper, knowledge aboutwhat adjustment that should be done through the whole production is needed. This degree project investigatesthe reproduction?s effect on the final print result.A test print is done at Quebecor World Nordic Interprint´s regular print unit. The evaluation of theprint shows how important the use of a unit adjusted ICC-profile is for the print quality. A comparisonbetween the two separation methods GCR and UCR shows that Interprint´s present ICC-profile, usingUCR as separation method, gives less missing dots.

Systemutveckling har på senare år rört sig mot allt mer flexibla metoder för att bedriva utveckling, ett agilt förhållningssätt vid systemutveckling i dagens IT-bolag är inte alls ovanligt. I takt med förändring av tillvägagångssättet har även ett moment inom testningen fått allt mer fokus: Testautomatisering. Vissa författare hävdar till och med att det inte går att bedriva agil systemutveckling utan att införa testautomatisering. Syftet med uppsatsen är därför att undersöka vilka utmaningar en testare inom de agila metoderna stöter på vid testautomatisering. Detta utförs med hjälp av intervjuer på fem olika företag av fem olika testare där de alla har en gemensam nämnare, att de jobbar agilt..

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

The purpose of this thesis is to achieve a greater understanding of how the social workers at the family unit in one of Stockholm municipalities comprehend the work environment at the workplace. Our aim is also to find out how the work environment can affect the health of the social workers in the form of their wellbeing and comfort at the workplace. In order to answer our purpose we conducted interviews of all social workers at the family unit in one of Stockholm municipalities that describe how they experience the work-environment in the workplace and how it influences their health.  We have analyzed the interview material in a thematic analysis based on three theoretical perspectives; SOC, claim ? control - support and Human relations. We have also coupled the interview material to the background chapter in this thesis that describes how a good working environment should be structured.  The chosen method characterizes an abductive process.