The EU Council adopted in 2007, environmental and energy goals with the aim of them must be met by 2050. This, in combination with those of the Swedish government 15 enacted environmental goals is supposed to lead the way for the Swedish environmental work.This report has examined measures in properties in the Swedish Cooperative Housing Society (SKB) stocks.The report discusses a range of measures that might be appropriate to apply on the properties to make them more energy efficient.One of the measures discussed, the vent whose primary purpose is to create a good indoor environment for the residents but is also where the most energy is lost.Another measure discussed is insulation of the building envelope on the estate to make it more energy efficient. To put extra insulation on the building envelope is important because of the large amount of energy that is lost through the walls, ceilings and floors.Future actions that may be implemented is individual billing of heating and hot water. This system has been used in European countries since the 70's and today the EU wants to increase the own individuals control over their electricity costs. This has led to a discussion whether to implement the system in Sweden or not.However, there are a number of equitable measures to be sorted out before the system can be used in any great scale.Finally, it is important to remember that environmental measures should be the primary and the pursuit of cost reductions the secondary otherwise you risk the environmental work to be counterproductive..

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

Climate change is the modern society?s common issue. The developed countries areconsuming more than what is sustainable, and the climate change due to the use offossil fuels can be seen clearly. EU has specified goals, in order to stop furtherdamage, which demand that every member state have to reduce its energyconsumption by 20 % before 2020 and 50 % before 2050, relative to 1995.The Swedish government uses a number of instruments to encourage reduction in theusage of energy, but every individual has to contribute to reach the goals.With increasing energy price the cost of living is going up. A lot of people are lookingfor ways to save energy and not be affected as much by the increasing price.Investments for insulation, replacement of windows and replacing old heating systemfor a new efficient heat pump is getting more and more common.This thesis is about investigating the possibilities in becoming independent from buyingenergy for households.

As a result of directives from EU, with the ambition to reach environmetal goals, The German organisation Passivhaus Institut has defined a passive house. A passive house is a building that is very energy efficient and makes a small impact on the environment. The energy from the inhabitants as well as the appliances & fixtures in the building should equal the energy that is required to heat the building. A Swedish version of the passive house definition has been defined, taking into account the climate conditions and the difference in building regulations.This thesis is a request from Skanska on how it can improve and develop an ongoing passive house project, involving an infant school. The intention of this thesis is to identify difficulties & display potential development areas for infant schools.The method of research conducted is as follows: interviews of clients, ventilation consultant, consultant for heating system and an energy calculation consultant, an inspection of the infant shcool in process, investigation of completed infant schools and a study of relevant literature.From this research it was found that it is difficult for infant schools to pass the criteria for passive houses. The conclusion of this thesis provide several guidelines on how to improve the outcome of existing projects & the steps needed to be taken for future development in this area..

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

Göteborg Energi has a surplus of district heating during spring, summer and fall. The heat surplus is due to a constant production of waste heat from oil refineries and heat from waste incineration over the year. It would be desirable to increase the demand for heat and the uptime for the newly built combined heat and power generation plant, Rya Kraftvärmeverk. One alternative could be to integrate Rya Kraftvärmeverk with a pellet production facility. By producing heat, electricity and pellet in a joint process the energy use can be decreased.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

In a sustainable society the use of renewable energy and recycling of materials is of high importance. Wastewater treatment plants use large amounts of energy in the processing of wastewater. This study seeks to evaluate wastewater as an energy resource and to examine treatment plants potential to become sustainable energy producers. The study is based upon the internal processes of Himmerfja?rdsverket.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Industries with energy costs as a large proportion of their total costs are greatly affected by the instruments deployed to cope with the Swedish climate and energy policy goals. With energy costs representing more than 30 % of the total costs, tomato cultivators are one of the affected industries. In order to remain competitive with other countries, a more resource- and cost-efficient cultivation of tomatoes in greenhouses is desirable in Sweden. Based on the concept of industrial symbiosis, this study investigates the prerequisites for a resource-efficient production of locally grown tomatoes in Sweden through the utilization of low grade industrial waste heat. The study is based on the foundry industry as the supplier of waste heat.To investigate the environmental, technical and economic potential of the exchange of waste heat, a comparative life cycle assessment, an inventory of the supply of industrial waste heat in Sweden, a compilation of potential technologies for the recovery of low grade industrial waste heat for heating greenhouses and a comparative life-cycle cost calculation were carried out.