Elitskon? is a new type of horseshoe for trotters. It is supposed to give the horse a trot that mimics the movement pattern of a horse trotting unshod. Many horses show a better trot unshod but this can only be used to a limited extent due to the great wear and tear of the hoof. The objective of this study was to evaluate whether the qualities of Elitskon? are similar to the unshod horse or the traditional aluminium horseshoe.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

AbstractAuthor: Sofie JakobssonCourse: Media and Communication Studies CUniversity: Division of Media and Communication, Department of Information Science, Uppsala UniversityPeriod: Spring 2012Key words: Job ads, Professional Communicator, Public Relations Officer, Trait Theory, Five Factor Theory, Big Five, personal traits, work tasks.Title: The Independent Specialist. A study of requested personal types in Professional Communicators.Number of pages: 35Purpose/ Aim: The study aims to evaluate what kind of personality type that would make a good fit for a Professional Communicator. The study examines personal traits and work tasks that are presented in job ads for Professional Communicators in Sweden today. From this material the author wants to calculate what kind of personal type that characterize the profession with the help of the Big Five theory.Material/ Method: Quantitative research method based on job ads.Main results: The study shows that personal traits that employers look for in Professional Communicators today are mainly traits from the Conscientiousness group with characteristics such as independent, structured and planning. The second biggest personality group is Extraversion where personal traits like driving, outgoing and social were put.

From underwater boat to submarine ? The development of the Swedish submarine service 1945-1960 The scope of this essay is the development of the Swedish submarine service during the period 1945-1960. The aim is to answer the following questions:- What kind of new technology did Sweden acquire when salvaging the German type XXI submarine off Gothenburg at the end of World War II?- In what respect did this technology differ from that of the Royal Swedish Navy and did it subsequently contribute to the tactical and operational development?- What tactical and operational development was accomplished between 1945-1960?The timeframe, 1945-1960, was chosen since this is when the analysis of the salvaged type XXI submarine and related effects was conducted. Furthermore, it is also during this time that the Swedish submarine service is beginning to evolve as a result of the new knowledge mentioned above and the experiences made by both the allies and the Germans during World War II.The theoretical framework primarily refers to the theories on naval warfare by Sir Julian Corbett.

Introduction The genetic skin disease epidermolytic ichtyosis is caused by mutations in either keratin gene 1 or 10 and leads to blisters and hyperkeratosis of the epidermis. At cellular level the disease is seen as aggregates in the keratin filaments. Since medicines are hard to investigate and produce mainly due to lack of reproducible model systems, there is no good treatment available for this disease today. In this article we describe how an in vitro model consisting of cells from a stable cell line transfected with expression plasmids to mimic patient cells, may be a possible alternative for screening compounds for therapies. The first step was to generate an expression plasmid required to complete the in vitro model.

The aim of this study is to find out if, and in what way the Maasai pastoralists affect the spotted hyena (Crocuta crocuta) through Bomas (Maasai settlement) and keeping of livestock. The study was carried out in the Maasai Mara National Reserve and the adjoining group ranch, Koyake GR, in South-western Kenya.Data was assembled through transect driving, with instantaneous scan sample during two seasons, December 2003 and May-June 2004. Study area contained 12 bomas with three different type of transects each: T1 (0.5 km from boma), T2 (3 km from boma) and T3 (5.5 km from boma), to create a gradual decline in human and livestock impact. Results show that there are differences in the hyena's utilisation of transect type during the day and during the night. The spotted hyena tend to avoid transects close to the boma during the day time, but go there during the night time.

This masters thesis concerns a modeling project performed at Volvo Technology in Gothenburg, Sweden. The main purpose of the project has been to develop a physical model of the climate in construction vehicles that later on can be used in the development of an electronic climate controller. The focus of the work has been on one type of wheel loader and one type of excavator. The temperature inside the compartment has been set equal to the notion climate. With physical theories about air flow and heat transfer in respect, relations between the components in the climate unit and the compartment has been calculated.

Nowadays the world of football has become more commercial than before. As a result of this the clubs' financial status is getting more and more important. Therefore the UEFA has given the national federations a specific task to make sure that the clubs from each country follow certain standards of maintaining the football credibility. The Swedish federation has decided that the Swedish clubs must follow the so-called ?elitlicensen?.

This study is made on assignment by the local board of forestry in Skåne, Blekinge and Halland. The change of the forest law 1994 brought a new type of management plan. A more active planning was introduced in order to equate the environment goal with the production goal. The purpose with this study is to give a better picture of how planning for nature conservation in production forest is made and to develop support for selection of silviculture methods for stands with combined goals. With combined goals means production forestry with a reinforced consideration to both nature and culture, called PF-classified stands. This was done by: ? Describing silviculture models from the literature that are possible to use for stands with combined goals. ? Describing silviculture models that is used in practice in stands with combined goals. ? Describing how the classification of stands with combined goals is used. Which means, were in the terrain, with which frequency and in which type of forest PF-classification is used. ? Comparing differences and similarities of theoretical and practical used models. The study was done partly as a literature study and partly as an interview study of forest planners.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

This rapport handles the presence of two kinds of watermills in the Swedish landscape. The first is a small type with a horizontal shovel blade and the other a bigger kind with a vertical standing shovel scoop. The rapport seeks for information of their capacity and how long they existed as flour producing units. A important issue is how small can a brook be and still run a mill. Finally the reasons for their disappearance in one selected parish is shown..

This thesis was carried out to give some background information to a report of SLU (Swedish University of Agricultural Sciences) for the Swedish National Rail Administration (Banverket). The requested information was to provide basic data for an environmental impact assessment of the construction of the tunnel through Hallandsås. The aim with the thesis work was to discuss and quantify the leaching of nitrate and the emission of nitrous oxide from the soil at the groundwater level established through the tunnel project. The nitrogen related processes that could be affected were described and discussed. The different areas where a decreased groundwater level can cause changes in the nitrogen processes are the wet and moist areas.

This thesis investigates how recipient countries' domestic type of democracy affects its inclusive ownership in international development cooperation. This is done by examining Swedish development cooperation with Rwanda and Tanzania during the period from 2010 to 2014, a time when ownership - a concept which emphasizes recipient countries' leadership over its own development - was a central part of the international development agenda. The two cases were selected through a most similar case design where the value of potential explanatory variables was similar, except for the recipient countries' types of democracy. Furthermore, the case study uses a comparative analysis to analyze strategies and reports done by SIDA and the Swedish Ministry of Foreign Affairs. Previous research focuses on the exclusion that national ownership can result in, in undemocratic national contexts. The main argument for this should be seen as the fact that ownership can not be representative if the power of the recipient's development agenda is limited to a decision-making elite.

AbstractA prerequisite to be able to use semi-natural pastures in an optimal way is knowledge about their conditions and properties. One thing to consider is the amount of herbage mass that can be produced during one season on different types of semi-natural pastures. That knowledge makes it easier to choose which type of animals and how many you are able to have in each paddock to maintain a high biodiversity and achieve the desired production of the animals at the same time.This study was performed in nine different semi-natural pastures around Uppsala. The paddocks were already mapped with regard to different vegetation types. Exclosure cages were placed on previously fertilized, mesic, dry, shaded and wet vegetation.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).