Studien syftar till att undersöka hur personer som ägnar sig åt kreativt skapande motiverar detta arbete, samt hur de uppfattar att detta skapandehar påverkat dem som individer. För att tillmötesgå detta syfte tillämpades en narrativ intervjumetod, respondenterna bestod av fyra individer som håller på med olika kreativa skapandeformer. Studiens resultat visar på att den största anledningen till att individerna väljer att skapa kreativt i sin vardag helt enkelt bygger på att de mår bra av det, det stärker deras identitet. Utöver detta visar även studien på att de genom sitt kreativa skapande även upplever att de blir en del i ett sammanhang, de känner tillhörighet med likasinnade.Vidaremenar även respondenterna att deras kreativa skapande har lett till att de känner sig mer självständiga och på så vis lättare kan stå emot olikanegativa sociala normer de annarsskulle påverkas av i högre grad.Slutligen kritiserar respondenterna även det rådande samhällsklimatet genom att hävda att det i hög grad fråntar individer deras möjlighet till kreativt skapande, och i och med det även stora delar av människor möjlighet till att skapa en identitet som en självständig och kritiskt tänkande individ..

The purpose of this research was to examine what motivates and influences an individual to invest in a project or company through equity-based crowdfunding. The intention was therefore to identify internal and external motivation factors and examine how external social factors such as the Internet, other individuals? investment decisions and interaction in social groups affect an individual when he or she invests through equity-based crowdfunding. The results showed that both internal and external motivation factors are important components of an investment through equity-based crowdfunding. External motivators proved to be for example yields and helping entrepreneurs.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

When a company seeks to enter a new market, the multiple choices of possible new business relationships exist. Further, establishing new relationships is a time-consuming procedure associated with high uncertainty and high costs. Hence, if the firm does not succeed in pinpointing the most suitable business partners to collaborate with, the firm may both forfeit other possible good relationships, as well as resources invested. Based on this notion the aim of this thesis is to explore how a manufacturing company can base the selection of future dealership Business-to-Business partners by evaluating indicators of a possible business relationship?s potential to become successful. The choice of focusing on the Business-to-Business relationship between a manufacturer and a dealership company originates from being influenced by the issues facing the Swedish agricultural machinery manufacturer Väderstad-Verken AB, who is putting attention to explore the US market.

AbstractThe purpose with this essay has been to gain a greater understanding and clarify how an arena can create value within place marketing and development of a place brand. This will be achieved through a description of which values an arena causes in the surrounding areas and an understanding of how these values can be interpreted through the place brand. We decided to base our study according to the following two questions:1. What are the underlying reasons why there has been such a big trend with arena project?2.

Title:Comparison of databases ? Is the law an obstacle?Authors:Alexander Ankarberg, Applied Information Science.Tutors:Lars- Eric LjungProblem: Cross running databases is getting more and more significant during the development of the information flow. There are huge benefits if we start to use the technique that already exists. The law is today an obstacle, so what would happen if the law wasn?t so stern.

In recent years, the Internet has exploded with different kinds of social media, where a significant function is to share your life in text and images. This changes how we form our identity, our religious identity included. The aim of this paper was to study how Instagram forms a space for the creation and development of religious and spiritual beliefs. For this purpose, Instagram updates from five women with yoga oriented Instagram accounts have been analyzed in relation to two theories: Paul Heelas? och Linda Woodhead?s theory of a spiritual revolution and Heidi Campbell?s theory of networked religion.The aim of the study was to explore how these women presented themselves in their Instagram flow and what part religion and spirituality had in their presentations.

The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

SAMMAMFATTNINGBakgrund: Reaktiv hyperemi definieras som ett övergående ökat blodflöde över det normala efter en tids ischemi. Det kan registreras med laserdopplerteknik. Att registrera reaktiv hyperemi är ett sätt att värdera mikrocirkulationen. Det finns många flödesvariabler att studera varav tid till maxflöde efter ocklusion är en. Det har gjorts studier som undersöker om det finns ett samband mellan reaktiv hyperemi och fysisk aktivitet/syreupptagningsförmåga.

Energy costs are high nowadays and that is the reason why the energy consumption needs to become as small as possible in most of the companies. To accomplish the small energy usage one needs to map the energy flows, study them and monitor them. One method that can be used for this is energy balance calculation. The method gives an opportunity to separate different energy flows and see where each flow is heading. There is also another method which is more advanced than energy balance calculation.

To be able to compete on the market environmental Management System has become an important part of operations work. However, many companies still haven?t implemented an environmental management systems due to lack of time and the high costs. One of the companies with this problem is Falu Bildemontering. Their goal is to accredited according to the ISO 14 001 certificate.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

This study has been made on behalf of the Swedish Transport Administration to study the work of the department National Projects. The Swedish construction industry has for many years been characterized by low productivity. By being the largest purchaser of contracts in the industry the Swedish Transport Administration has a unique opportunity to influence the productivity. In order to improve in productivity The Swedish Transport Administration is adopting a new role in which they will order more turnkey projects. In our study, we will focus on how one department within the Swedish Transport Administration, National Projects, can perform successful turnkey projects.To clarify how the department National Projects can perform successful projects, this study identifies critical factors for projects and their links to different phases of the project.