SRG Carrier Systems AB har tagit fram en ny maskin MPM 160 där MPM står för Multi Purpose Machine. Den är en typ av redskapsbärare i storleken av en skogmaskin som beroende på vad den utrustas med kan fungera som i princip vad som helst. Hytten på denna maskin skall om så önskas alltid kunna stå horisontellt. Detta skall kunna ske automatiskt eller manuellt och tiltningen sker med hjälp av sex stycken hydraulcylindrar.Arbetet i denna rapport avser skapandet av det automatiska systemet. Styrsystemet har skapats i mjukvaran CANmaster från Hydratronics AB.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Emwiro Vibe is a complete system for seismic measurements. The functionality of the system was before the completion of this project handled using a software contruction based on a state machine. Emwitech, the company developing Emwiro Vibe, expressed a desire to replace this solution with a real-time operating system (RTOS). The project consisted of two parts. Firstly the existing software was studied, available RTOSes was evaluated, and the RTOS most suitable for the application was selected.

Today a lot of goods is transported on wood pallets because it?s practical and enabels a fast way to load cargo. The drawbacks with pallets are that they weight a lot, are big and are relatively expensive. Therefore IKEA has developed plastic lists that can replace the europallet in some applications. In this examwork an automatic handling equipment for plastic lists are design from a requirement specification to a finished machine.

Abstract This study aims with a pragmatic approach to investigate the learning about how to solve simple equations, and what the teacher can do to help the student. Four questions asked are: (i) How and why will learning take place? (ii) What will complicate learning? (iii) How to support and facilitate learning? (iv) Is it possible to identify an influence between identity and learning? To answer these questions a qualitative study in elementary school is done. The results of the investigation are compared with previous research, and an interview with the teacher is presented. The recorded lessons are analyzed with PEA (practical epistemology analysis), and letters from the students with the Ecological Systems Theory of Bronfenbrenner.

The International Organization for Standardization (ISO) proposes vibration standards for the evaluation for machine damage due to vibration in rotational machines, where some vibration parameters are given to measure the vibrationgrade. This work evaluates the relevance of the vibration standards in hydro plants that are proposed by the ISO, and also investigates if there are methods used in other countries could have greater importance. Through statistical analysis of collected data we got a better understanding of relation among different vibration parameters, and also the importance of correct choice of the parameters for the evaluation of vibration. We have found that the vibration standards available today in hydro plants are not reliable for the judgment of vibration?s grade.

Judged by appearance. This is the conclusion of research made on shopper behavior that revealed that consumers tend to go by their instinct when evaluating vacuum cleaners in a purchasing situation. Many buy the first vacuum cleaner they interact with and few buy pre-planned brands. Almost none even turn the machine on before taking a purchase decision.Electrolux Floor Care Europe has their factory for vacuum cleaners in Hungary. Increased competition from China makes it harder to "only" produce vacuum cleaners with good performance.

This report is a thesis on requests from Sandvik Mining and Construction (SMC) in autumn of 2012. The goal of this work was to study the feasibility of creating and implementing an Equalized preventive maintenance program in SMC maintenance operations and reduce downtime for preventive maintenance (PM). To investigate whether this was possible, the authors studied the current procedures for the PM. The authors have collected and analyzed all relevant information within the maintenance department reporting system as well as through interviews determined whether it is practical to introduce a Equalized PM programs. The authors had also studied the possibilities to entrust part of the maintenance work to the operators of the machine cells.

Commissioned for this report is Ramboll, Bridge and Tunnel Unit in Stockholm. Theidea throughout the work has been to primarily help bridge designers compilingadvice and instructions on how fatigue verification for railway bridges in reinforcedconcrete shall be performed under the new rules, the Eurocodes.After the introduction of the Eurocodes in 2011 has major problems emerged amongdesigners around Sweden. In some areas, it differs in the calculation rules comparedwith rules from the Swedish Transport Administration and the National Board ofHousing, Building and Planning calculation. Fatigue verification is one area where thenew calculation rules are different from the past.A large part of the report has been to interpret and find the relevant information inthe Eurocodes concerning fatigue. When questions or doubts have surfaced, this hasbeen discussed with Elisabeth Helsing at the Swedish Transport Administration andbridge designers at Ramboll.The result is a report where the structure is organized in the way that the bridgedesigners can move from cover to cover and realize that fatigue verification in realityfollows the same order as the report's sections.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

This Master of Science thesis was completed at the Department of Machine Design at the Royal Instituteof Technology in Stockholm in collaboration with Lund Faculty of Engineering, Luleå University ofTechnology and Stanford University. At Stanford University a global product development project wasrealized as part of the course ME310. The project was initiated by the American company ImmerseGlobal whose vision was to develop a new type of Atmospheric Water Generators, a machine that absorbsthe moisture in the air and via a water system transforms it to pure drinking water. The project was partlyfinanced by the Product Innovation Engineering program, a Swedish research and development programfor increased innovation capability in organizations.In parallel with the global project in the ME310 course the product development process was studied inorder to compare it with a product development course at the Royal Institute of Technology, IPU. Thetwo courses are similar to each other in several aspects.

To be a part of the future we have to make a profit, one way to improve the profit margin is by reducing the fixed costs. This paper discusses the financial results of equipment cooperatives in crop production. Through a case study of three farms in Södermanland, we have an example of how it can look today and how it could look tomorrow. The three farms are crop-producing farms with slightly different orientation. Jursta Gård, 155 hectares, and Djursnäs Säteri, 215 hectares, have grains crop and oilseed crops as the main crops, and Nibble Gård, 340 hectares, mostly have pasturelands and some grain crops.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Improved wireless datacommunication with the forest machines might be the next big step in the logging process. The use for wireless communicationsystems within the forestry is among other things to report the production from the forest machines, to supply the machine opera-tors with the right information and for safety. CDMA2000/ 450 is a third generation mobilecommunicationsystem which could replace the old NMT- 450 and for comparatively low costs. The reason for the low costs is that you only have to use the old NMT- 450 masts and supply them with new equipment. In the test of CDMA2000/450, that has taken place in northern Uppland, two kind of files have been sent.